Victory HIA-1D-S7-XH User manual

Extra-High Roll-In Warming Cabinets
Cabinet:
Each Victory cabinet is internally supported,
braced and assembled into a single rigid
unit. The cabinet front and doors are
constructed of heavy gauge polished
stainless steel to maintain an attractive
appearance after years of heavy use.
Foamed-in-place polyurethane insulation
throughout the cabinet and doors ensures
the ultimate in energy efficiency. An
operational indicator panel contains a
thermometer and thermal control which is
accurately calibrated from 80°F. to 180°F.
Doors:
The self-closing doors are securely mounted
on rugged cam-lift hinges, which have a
lifetime guarantee. Each door has a heavy-
duty cylinder lock and self-adjusting
magnetic gasket. The full perimeter of the
door opening has a stainless steel door
jamb. The interior door liner is constructed
of heavy gauge stainless steel. Each safety
grip handle is guaranteed for life. Removable
ramps are provided on the bottom of each
door opening.
Heating System:
Strip type 750-watt heating elements,
operating on 208-240/60/1, having a total
of 1500 watts per compartment. An external
mounted blower system maintains even
temperature through out the food zone.
Manually controlled humidity vents are
provided in the top of the cabinet.
HIS and HISA Models
• Digital Thermometer/Battery Back-up
HIA Models
• Dial Thermometer
Standard Features (all models)
• Thermal Controls
• Stainless Steel Case Front and Door(s)
• Lifetime Heavy-Duty Cam Lift Hinges
• Lifetime Safety Grip Handle(s)
• Self-Closing Doors with Safety Stops
• Adjustable Wiper Gasket(s)
• Removable Ramp(s)
• Door Opening Accepts Carts up to 27" Wide x
29" Deep x 72 1/2" High
• Heavy-Duty Cylinder Locks
• One Piece Self-Adjusting Magnetic Door
Gaskets
Optional Features and Accessories
• Dial or Digital Thermometer
• Hinged Glass Doors with Cylinder Locks
• Change Door Swing
• Shelf Pilaster Strips
• Adjustable Stainless Steel Wire Shelves
• Stainless Steel Wire Pan Slides
• Stainless Steel Angle Pan Slides
• Zinc Plated Wire Pan Slides
• Stainless Steel Case Back
HIS-22D-SS7-XXH
Roll
Thru Models Available
Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: [phone] I Fax: [phone] I E-mail: [e-mail]
Victory Refrigeration specification sheets
are available online at www.victory-refrig.com.
Approvals:
Project:
Location:
Item #:
Quantity:
HIS MODELS —
Stainless steel
exterior and
interior.
HIS-1D-S7-XH
HIS-2D-S7-XH
HISA-1D-S7-XH
HISA-2D-S7-XH
HIA-1D-S7-XH
HIA-2D-S7-XH
HISA MODELS —
Stainless steel
exterior.
Aluminum interior.
HIA MODELS —
Stainless steel fronts
and doors. Aluminum
sides and interior.

Victory participates in the KCL CADalog, the most current source of CAD symbols for foodservice designers worldwide. Symbols include
standard equipment in plan, side, front and 3-D views, layered for FEDA/FCSI recommended guidelines.
Continuous product development may necessitate specification changes and design without notice.
Victory
Refrigeration, Inc. Extra-HHigh Roll-IIn Warming Cabinets
Crated dim. & wts. Ht. Width Depth Cu.Ft. Lbs
One Section 87 413/4443/494.1 665
Two Section 87 745/843 168.1 970
Approximate Roll-Thru weights, add 15%
Dimensional tolerance ± 1/4” Metric dimensions (MM)
Copyright January 2004
Printed in U.S.A. 010428
PART OF AGA FOODSERVICE GROUP
39.38
(1000)
16.38
(416)
18.25
(463)
35.88
(911)
31.25
(793)
36.50
(927)
89.50
(2273)
27.75
(705)
72.25
(1835)
.88
(22)
ELEC.
CONN.
HUMIDITY
VENT
ELEC.
CONN.
32.38
(822)
14.12
(358)
34.38
(873)
35.50 (902)
TO RAMP
89.50
(2273)
68.88
(1749)
.88
(22)
27.75
(705)
72.25
(1835)
27.75
(705)
39.38
(1000)
18.25
(463)
18.25
(463)
16.38
(416)
35.88
(911)
63.62
(1616)
ELEC.
CONN.
HUMIDITY
ELEC.
CONN.
VENT
ROLL-THRU MODELS
ROLL-IN MODELS
FRONT VIEW FRONT VIEW SIDE VIEW
NOTE: If cabinet is located directly against
wall and/or under low ceiling, a minimum
clearance of 2” is required.
If cabinet is located under low ceiling, a
minim clearance of 6” is required for
serviceability.
We reserve the right to change
specifications and product design
without notice. Such revisions do not
entitle the buyer to corresponding
changes, improvements, additions or
replacements for previously purchased
equipment.
CHARACTERISTICS ONE SECTION TWO SECTION
Roll-In Roll-Thru Roll-In Roll-Thru
Width, Overall 36 1/236 1/268 7/868 7/8
Depth, Overall (incl. handles) 35 7/839 3/835 7/839 3/8
Height, Overall (incl. adj. legs) 89 1/289 1/289 1/289 1/2
Depth, Doors Open 90º 65 1/465 1/465 1/465 1/4
Depth, Case Over Ramps 35 1/235 1/235 1/235 1/2
Clear Door Width 27 3/427 3/427 3/427 3/4
Clear Full Door Height 72 1/272 1/272 1/272 1/2
Capacity Net (cubic feet) 36.3 36.3 72.6 72.6
No. of Full Doors 1 2 2 4
Cabinet Voltage 208-240/60/1 208-240/60/1 208-240/60/1 208-240/60/1
Max. Fuse Size T.D. 15 Amps 15 Amps 20 Amps 20 Amps
Feed Wires 3 3 3 3
Heater Watts per Section (@240V) 1500 1500 1500 1500
Total Wattage (Heaters & Fan @240V) 1500 1500 3000 3000
Total Amperes 6.3 6.3 12.5 12.5