Videodata Lilliput 969 User manual

0
Lilliput 969
User Manual
VDH Video Data Handels GmbH
Kohlentwiete 14
22761 Hamburg
www.videodata.de

1
IMPORTANT SAFETY INSTRUCTIONS:
Please read manual before using this product.
Please keep manual for future reference.
Please read the cautions to prevent possible danger and loss of property
Please enjoy the benefits of convenience, safety, and space-saving from this
TFT LCD monitor in different ways.
FEATURES:
This product employs integrate circuits, lower power consumption, and lower
radiation emission. It has fashion designed appearance and good portability;
LED backlight display makes the device much thinner, more power saving;
Video (or SDI)、YPbPr、Dual audio and HDMI inputs, to connect with HD
camera;
High brightness & contrast with flexible folding sun shade cover, makes
picture detail much clearer, more vivid outline, stronger sense of hierarchy;
178°/ 178°(H/V) wide viewing angles,to provide better viewing effect;
1024×768 high resolution
DC 7-24V wide range voltage.
CAUTIONS:
1. Please do not place the display screen toward the ground.
2. Please avoid heavy impact or drop onto the ground.
3. The LCD screen is very easy to shave a wound, avoid crashing please.
Be sure not to use other sharp article to bump against touch screen.
4. Please do not block any vent hole.
5. Please follow the instructions and trouble-shootings to adjust the product.
Other improper adjustment may result in damage. Any further adjustment
must be performed or conducted by a qualified technician.
6. Please unplug the power or remove the battery if long-term no-use, or
thunder weather.
Contents
1. PRODUCT DESCRIPTION ................................................................................2
2. INSTALLATION OF SUNSHADE COVER......................................................4
3. DV BATTERY MOUNT PLATE.........................................................................5
4. SETTING MENU..................................................................................................7
5. ACCESSORIES:...................................................................................................9
6. PARAMETERS...................................................................................................10
7. TROUBLE SHOOTING ....................................................................................10
YP-01130911

2
1. PRODUCT DESCRIPTION
1. TA L LY (indicator light);
2. Battery power on/off switch: “‖” is battery power; “O” is power off; “|” is
DC power;
3. Earphone jack;
4. Power indicator light;
5. VIDEO: Indicator lights up when signal switch to video state;
(No use under the SDI mode);
6. YPbPr: Indicator lights up when signal switch to YPbPr state;
7. HDMI1: Indicator lights up when signal switch to HDMI 1 state;
8. HDMI2: Indicator lights up when signal switch to HDMI 2 state;
(Signal switch to SDI state under the SDI mode);
9. F1-F4:4 user-definable buttons:
Default functions:F1：Peaking
F2：False Color
F3：Exposure
F4：Histogram
10. Knob BRI/M/SEL: Press the knob to access the menu function, pressing
the knob in the menu to return to the previous page or exit the menu.
Rotate knob to select an option;
Default as Brightness function.
11. Knob SAT/ADJ: Press the knob to select main MENU options; rotate knob
to confirm the selection and adjust parameter values;
Default as Saturation function.
12. Knob TINT: Default as Tint function;
13. Knob CONTRAST: Default as Contrast function.

3
14. SDI signal input/ output (Optional);
15. Y signal and Video signal input / output;
16. Pb signal input / output;
17. Pr signal input / output;
18. Audio (L/R) input;
19. HDMI 1 signal input;
20. HDMI 2 signal input (no use under SDI mode )；
21. HDMI signal loop output (optional);
22. Mini USB input (Only for program upgrades, do NOT use if
non-professionals)
23. Power cable interface (connecting to the battery plate);
24. Speaker;
25. TA L LY signal input;
26. USB output port (DC 5V/0.5A)
27. 4-pin XLR DC power input.
Pin number Signal
①
GND
②③
……...
④
+12V
Ps: Unavailable under SDI mode 26 (USB 5V/0.5A output power).
※
Optional: Without BNC interfaces

4
2. INSTALLATION OF SUNSHADE
COVER
Pushing to close / open sunshade from assigned round area when assembly /
disassembly. （i.e. assembly instruction ②/ disassembly instruction ①);
otherwise assembly / disassembly failed, and even damaged.
Assembly instructions
Disassembly instructions
Push to close
Push to open

5
3. DV BATTERY MOUNT PLATE
Standard mounts process
Following three types of battery plates are suitable for this device, model F970,
QM91D, DU21 & LP-E6 (choose 2 out of 4).
MODEL: F-970 MODEL: QM91D MODEL: DU21 MODEL: LP-E6
DV Battery Mount Plate:
DV Battery Mount Plate Specification:
Model DU21 for battery of Panasonic DV:
NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with
Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.
Model QM91D for battery of SONY DV:
DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV11
6/DCR-DVD/PS105K/300K/10P/1E series.

6
Model F970 for battery of SONY DV:
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E,
HVR-Z1C, HVR-V1C, FX7E F330.
Model LP-E6 for battery of Canon DSLR:
5D Mark II/EOS7D/EOS60D；
V-mount battery plate (optional): Please refer to GP-L130AB type
battery specifications.
Anton Bauer mount battery plate (optional): Please refer to
GP-L130B type battery specifications.

7
4. SETTING MENU
Before setting the functions, please make sure the device is connected correctly.
When power on, press BRI/M/SEL knob on the device, function menus will
pop-up on the screen. After confirm the option value, then press BRI/M/SEL
knob to return to the previous, and press the BRI/M/SEL knob again to exit the
menu settings.
BRI / M / SEL knob to select an option.
SAT / ADJ knob to select the main menu, adjusting option values and
confirm the selection.
Function of buttons and knobs
ITEMS OPTIONS
Color Temp
6500ºK/7300 ºK/9300 ºK/User
Red
Note: Only available
under “User” mode to
meet the color value you
need.
Green
Blue
Check Field
OFF
，
MONO
，
Red, Green and
Blue
Aspect Ratio
Full Screen and 16:9
Pixel-to-Pixel
ON/OFF
Camera
480P
(5DII Mode)
/ 1080I
(5DIII Mode)
H/V delay
OFF,H&V Delay, V Delay and H
Delay
Underscan
ON/OFF
ITEMS OPTIONS
Center Marker
ON/OFF
Screen Markers
OFF,95%,93%,90%,88%,85%
and80%

8
Function of buttons and knobs can be customized by users’ needs.
Functions of F1-F4 buttons can also be customized:
·Aspect Ratio·Check Field·Freeze Input·Center Marker
·Underscan ·H/V delay ·Color Bar ·Screen Marker
·Zoom ·Camera ·Pixel-to-Pixel·PIP
·Peaking ·False Color·Exposure ·Histogram.
Functions of R1-R4 buttons can also be customized:
·Contrast ·Brightness ·Saturation
·Tint ·Volume ·Sharpness
Note: Off, camera, X2, X4 and X8 options can be set when zoom function customized as shortcut key.
ITEMS OPTIONS
Language
English /Chinese
PIP
Small, Medium, Large, PBP,
POP
In small, medium and large
interface can adjust the source,
position, and swap;
In PBP and POP interface can
adjust the source and swap.
Input Format
OSD
5s、10s、15s
LOGO
ON/ OFF
Freeze Input
ON/ OFF
Peaking
Mono/ Color
Assistant Func.
Manual/ Auto
Manufacturer
Default
OK/Cancel(Reverse the SAT / A
DJ knob to select "OK")
ISP
For program upgrades (Please
reboot your computer if press
accidentally!)

9
5. ACCESSORIES:
Standard accessories:
1. Flexible folding sun shade cover 1 piece
2. Battery plate bracket 1 piece
3. Battery plate (F-970/QM91D/DU21/LP-E6)2 pieces (choose 2 out of 4)
4. HDMI type A –A 1 piece
5. DC 12V power adapter (XLR connector) 1 piece
6. TALLY connector 1 piece
7. Manual 1 copy
8. Gimbals bracket 1 piece
Optional accessories:
1. Anton Bauer mount battery plate 1 piece
2. V-mount battery plate 1 piece
3. Suitcase 1 piece