Videolink Lilliput TM-1018/S User manual

0
User Guide

1
IMPORTANT SAFETY INSTRUCTIONS:
Please read user guide before using this product.
Please keep user guide for future reference.
Please read the cautions to prevent possible danger and loss of
property.
FEATURES:
High resolution: 1920×1080;
Wide voltage: DC 7-24V;
High brightness: 400cd/㎡;
High contrast: 1000:1;
CAUTIONS:
1. Please do not place the display screen towards the ground.
2. Please avoid heavy impact or drop onto the ground.
3. Please do not use chemical solutions to clean this product. Please
wipe with a clean soft cloth to maintain the brightness of the surface.
4. Please do not block any vent hole.
5. Please follow the instructions and trouble-shootings to adjust the
product. Other improper adjustment may result in damage. Any further
adjustment must be performed or conducted by a qualified technician.
6. Please unplug the power and remove the battery if long-term no-use,
or thunder weather.
YP-01180324

2
Contents
1. PRODUCT DESCRIPTION........................................... 3
2. DV BATTERY MOUNT PLATE..................................... 4
3. MENU SETTING........................................................... 5
4. ACCESSORIES............................................................ 8
5. PARAMETERS ............................................................. 9
6. TROUBLE SHOOTING................................................. 9

3
1. PRODUCT DESCRIPTION
1．MENU:
Menu key: press to display menu on the screen when screen is lit.
Confirm key: press to confirm the selected option.
2．►Right selection key: to select items on OSD menu, value option
adjustment and confirmation; Press to adjust the brightness,
contrast, saturation, tint , sharpness and volume increase .
3．◄Left selection key, to select items on OSD menu and value
option adjustment; Press to adjust the brightness, contrast,
saturation, tint , sharpness and volume decrease.
4. F1 / EXIT
F1：Peaking
EXIT: To return or exit the menu function.
5. Power on / off.
6. Power indicator light
7. Earphone.
8. HDMI output interface.
9. HDMI input interface.
10. DC 12V power input.

4
2. DV BATTERY MOUNT PLATE
Standard mounts process
①First place battery plate into the plate,
②Please slide LP-E6 battery to the left.
③Please slide F970 battery to the right.
DV Battery Mount Plate Specification:
Model F970 for battery of SONY DV:
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,
HVR-V1C, FX7E F330.
Model LP-E6 for battery of Canon DSLR:
5D Mark II/5D Mark III/EOS7D/EOS60D/EOS70D;

5
3. MENU SETTING
Before setting the functions, please make sure the device is
connected correctly.
3-1. F1 User-definable function button:
Select "MEMU -- SYSTEM -- F1 Configuration" to custom F1
shortcut setting. Then press ◄/►button to choose options.
Press "MENU" to confirm option as default, then press EXIT to exit.
Function of F1 button can also be customized: Center Marker,
Aspect Marker, Check Filed, Underscan, Scan, Aspect, DSLR,
Freeze, Peaking, False Color, Exposure, Histogram, Level Meter.
F1 user-definable function button
Default function:
Peaking
3-2. ◄/►Buttons
Press ◄/►button to activate the brightness bar when not under the
menu display
press again to adjust the value of option directly.
Press “F1/EXIT” to exit if accidentally enter the menu.
After enter the Volume menu, press "MENU" to select among of
brightness, contrast, saturation, tint , sharpness , volume, exit and
MENU.
3-3. MENU Operation
When power on, press "MENU" on the device, the menu of function
setting will display on the screen.
Press ◄/►to select the menu option;
Then press "MENU" to confirm;
Press “F1/EXIT” button to exit menu.

6
Main Menu
Picture, Marker, Function, Waveform, Audio, System
Picture
Brightness
0~100
Contrast
0~100
Saturation
0~100
Tint
0~100
Sharpness
0~100
Color Temp
6500K, 7500K, 9300K, User (R.G. B)
Red Gain
0~255
Note: Available only under
“User” mode to choose the
color value you need.
Green Gain
0~255
Blue Gain
0~255
Red Offset
0~511
Green Offset
0~511
Blue Offset
0~511
Marker
Center Marker
ON, OFF
Aspect Marker
16:9, 1.85:1, 2.35:1, 4:3, 3:2
Safety Marker
OFF, 95%, 93%, 90%, 88%, 85%, 80%
Marker Color
Red, Green, Blue, White, Black
Grid
OFF, ON
Marker Mat
OFF, 1, 2, 3, 4, 5, 6, 7
Thickness
2, 4, 6, 8
Function
Scan
Aspect, Pixel To Pixel, Zoom
Aspect
16:9, 1.85:1, 2.35:1, 4:3, 3:2
Underscan
OFF, ON
Check Field
OFF, Mono, Red, Green, Blue
Zoom
x1.5, x 2, x 3, x 4
Freeze
OFF, ON
DSLR
OFF, 5D2, 5D3
Waveform
Peaking
OFF, ON
Peaking Color
Red, Green, Blue, White, Black
Peaking Level
0~100
False Color
OFF, ON
Exposure
OFF, ON
Exposure Level
0~100
Histogram
OFF, ON
Audio
Volume
0~100
Level Meter
OFF, ON
System
Language
English, Chinese
OSD Timer
10s. 20s, 30s
Image Flip
OFF, H, V, H/V
Back Light
0~100
F1 Configuration
Peaking
Reset
Press to confirm after selected.

7
3-4. Color Space
The wide color space supporting ITU-R BT.709, matching
with strict color calibration that makes accurate color
reproduction and excellent grayscale.

8
4. ACCESSORIES
Standard:
1. Folding sun shade cover 1 piece
2. HDMI A/C cable 1 piece
3. Hot shoe mount 1 piece
4. Manual 1 copy
5. PARAMETERS
Panel
5”8bit IPS
Physical Resolution
1920×1080 (441ppi)
Aspect Ratio
16:9
Brightness
400 cd/㎡
Contrast
1000: 1
Viewing Angle
170°/ 170°(H/V)
Input Voltage
DC 7-24V
Input Signal
HDMI
Output Signal
HDMI
Power Consumption
≤9W
Operating Temperature
-20℃~50℃
Storage Temperature
-30℃~70℃
Dimension (LWD)
129.6×80.1×23.6mm
Weight
118g

9
6. TROUBLE SHOOTING
1. Only black-and-white display:
Check whether the color saturation is properly setup or not.
2. Power on but no pictures:
Check whether the cables of HDMI are correctly connected or not. Please
use the standard battery.
3. Wrong or abnormal colors:
Check whether the cables are correctly and properly connected or not.
Broken or loose pins of the cables may cause a bad connection.
4. When on the picture shows size error:
Press “MENU → FUNCTION → Underscan” to zoom in/out pictures
automatically when receiving HDMI signals
5. Other problems:
Please press "MENU" button and choose “MENU→SYSTEM→ Reset
→ON”
Note: due to constant effort to improve products and product
features, specifications may change without notice.