VideoSystemer VSVM-105 User manual

High Performance Industrial
LCD Monitor 12,1”
VSVM-105
User’s Manual

- 2 -
Caution and Warning
All safety and operating instructions should be read before the unit is operated,
and retained for future reference.
All operating and use instructions should be followed, and all warnings on the
unit and in the operating instructions should be adhered to.
This sign is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product that may shock to person
This sign is intended to alert the user to presence of important operating
and maintenance(servicing) instructions
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS MONITOR RO
RAIN OR MOISTURE
zDo not remove cover(or back).
zNo internal parts can be serviced by users.
Installation should be performed by qualified service personnel
Caution and Warning
Cautiong sign
Warning sign
zThis display should be installed on a stable horizontal base.

- 3 -
zDo not use this product near water.
zAdequate ventilation must be maintained to ensure reliable and continued operation and
to protect the monitor from overheating.
zDo not block ventilation slots and openings with objects or install the monitor in a place
where ventilation may be obstructed.
zDo not attempt to service this unit yourself.
zRemoval of the monitor cover may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
zWhen cleaning, use only a neutral detergent cleaner with a soft damp cloth. Do not spray
with liquid or aerosol cleaners
zDo not expose this monitor to direct sunlight or heat.Hot air may cause damage to the
cabinet and other parts.
zDo not install this monitor near a motor or transformer where strong magnetism is
generated. Images on the monitor will be distorted and the color irregular.
zDo not allow metal pieces or objects of any kind fall into the monitor through ventilation
holes.
zUnplug this product from the wall outlet and refer servicing to qualified service personnel
in the event that:
1. Liquid is spilled into the product or the product is exposed to rain or water.
2. The product does not operate normally when the operating instructions are followed.
3. The product has been dropped or the cabinet has been damaged.
4. The product exhibits a distinct changed in performance, indicating a need for service.
5. The power cord or plug is frayed or damaged.

- 4 -
CONTENT
Caution and Warning
Caution and Warning............................................................................................................1
1 Introduction
………………………………………………………………………………………………………5
2 Installation
Checklist................................................................................................................................6
Installation..............................................................................................................................7
Connection ............................................................................................................................9.
3 Common operation
Definition of the Button board .............................................................................................11
Definition of the Remote controller.......................................................................................12
Select the signal input..........................................................................................................13
Usage of the OSD................................................................................................................13
4 Technical Specifications
..........................................................................................................................15
5 Troubleshooting
……………………………………………………..................................................16

- 5 -
1 INSTRODUCTION
Welcome to a fantastic new technology which will completely bring you excellent image experience when you
watch the monitor. The following sections describe just a few of the major advantages of this industrial LCD monitor.
You’ll discover more of its wonderful features as you use it.
Excellent Image：
zTwo 3D Adaptive Comb Filter for Luma-Chroma separation
zAdaptive 3D Noise Reductions, Depth of field
zRicher color, Dynamic motion, Sensational sharpness, Deep contrast
zHigh Purity Color filters
zHigh performance and programmable sharpening filters with Noise Coring
zExcellent Brightness and Contrast
zNon-linear Chroma enhancement
zNon-linear Luma enhancement
zFlesh Tone correction
Perfect Function：
Common Function:
zLow power consumption when standby, memory of present state to recover from sudden power-off
zMany Signals Supported: VGA-analog 、S-video etc.
zVGA modes Supported: 1280X1024，1024X768，800X600，640X480
z1 channel S-video
z5Key OSD interface.
Special functions for video/audio application:
3D comb filter, de-interlace, overscan, auto impedance switch for looping video connection.
The above-mentioned function may differ according to the model that you’ve purchased. Please refer to
model name for accurate specification of your unit.
Supported installation method:
Table VESAwall and RACK mounting application.
Advantages：
High definition performance in image and video display;
Low power consumption, Low radiation and reduced flickering compared to the traditional CRT monitors
minimize hazards to your ;
Professional design to meet the require in security fields application;

- 6 -
2 Installation
CHECK LIST
When you unpack your LCD monitor, make sure the following items are included in the box and are in good
condition. If you find that any of these items are damaged or missing, please contact your dealer immediately.
mounted on its stand
□
■One LCD monitor
■ ACpowercord ■ powerAdaptor(Optional)
■ Theusermanual ■ Remote controller
□ Stand(Optioal) ■ RACK mounting (Optional)
INSTALLATION
Single Monitor table stand, Wall Amount hanging and Cabinet fixing are optional for use

- 7 -
Table stand
Please refer the following steps of table stand installation.
① Make Sure the following parts are prepared：
② For the safety of the LCD panel, soft cloth should be prepared to spread on the table, the lie the
monitor on it, fix the stand to the monitor as following instruction.
③ Fix the screw and stand.
Wall Amount
Use the Wall Amount Fixing Hole can easily hang the monitor on the wall.

- 8 -
View effect of wall amount:
Cabinet Fixing
The Wall Amount Fixing Hole can also be used in machine cabinet fixing .
Fixing Hole

- 9 -
Connection
After installation, now you can connect your monitor to the video source machine. The following
images are the diagrams of possible interface of your monitor which will differ accord to the model you
purchased.
Interface diagram
Hardware Connection
1. Before connecting any devices, please make sure that your monitor and all other equipment are
turned off.
2. Place the monitor on a stable horizontal surface such as a table or a desk.
3. Attach the power cable to the monitor and then to a power outlet.
4. Connect VGA Cable at the back of the monitor, then connect the D-sub 15-pin connector
located at the back of computer or VCR
5. Tighten the screws of the monitor cable until the connectors are fastened securely.
6. Connect the composite signal (video, S-video) cable from the back of the video unit to the back
of the monitor.
7. Connect the Component signal (YPbPr) cable from the back of the video unit to the back of the
monitor.
8. Switch on the power supply of the computer system or AV equipment then turn on the LCD
monitor.
Note: This monitor also supports the “auto looping” function, permitting the connection of another
monitor or VCR from the output connectors.

- 10 -