Videsur-electronic VSDCN89AVI User manual

User Manual of Cross Camera
Product Accessories
● Cross camera ● USB cable ● User manual CD ● Aclip
● Chain ● Charger
Picture & Buttons
1. Power on/off/record/photo 2. Indicator light 3. Reset
4. Switch button (left: take photo; right: record video) 5. MIC
6. Camera 7. USB port
TechnicalData
1) Main functions: recording video and audio at the same time, taking photos, USB
drive, Cross chain
2) Video format:AVI, 640*480 resolution
3) Photo format: JPEG, 1280*1024 resolution
4) Internal memory:2GB-8GB
5) USB: 2.0(Hs)
6) Charging time: 2-3 hours
7) Using time: Built Li-chargeable battery: can work for 2 hours continuously
8) Recommend player software: Storm, KMplayer, Mplayer etc
9) Operation systems: Windows ME/2000/XP/Vista no need driver（windows98 is
excepted）

Operation directions
Recording video and audio
1) Under power off mode, push the switch button to the position of “V”, and press the
power on/off/record/photo button for several seconds. The yellow light turns on,
seconds later becomes blue light then keeps on, which indicates that the device
is recording video and audio.
2) Press the power on/off/record/photo once, the blue light becomes yellow then
keeps on, indicating that recorded video is saved and camera returns to standby
mode.
Attention:
1) Data saving time is related to the file volume, that is to say, the bigger the size of
the video is, the longer the preparing time of saving data will be.
2) The device will save the video file every 50 minutes, then continue recording
automatically.
Switch models
1) Under standby mode and recording mode, push the switch button to the position
of “P”, the camera comes to photo mode;
2) Push the switch button to the position of “V”, the camera enters the recording
mode; and begin to record video and audio immediately.
Attention: When switching the recording mode to taking photo mode, the system will
save the recording data automatically first then enter the taking photo mode.
Taking photos
Under taking photo mode, the blue light keeps on. Press power on/off/record/photo
button once, the yellow light blinks once, indicating one photo is taken and saved, and
the system also is in the taking photo mode.
Switch off
1) Under any mode, press the power on/off/record/photo button for several seconds,
all the lights are off indicating the device is power off.
Attention: Under recording mode, press the power on/off button for several seconds,
the system will save the data automatically.

2) Press the reset button with a clip softly, all the lights are off, which indicates the
device is power off.
Attention: when shut down the camera by pressing the reset button, the recording
data will not be saved.
Reset
With an incorrect operation or a certain reason, the device may stop working. At this
time, insert a clip into the reset hole to reset it and the device will power off.
Attention: please reset the camera with moderate strength; otherwise thecomponents
will be harmed.
Charging
Please charge the camera with adapter, when charging, both red light and green light
of the adapter keep on; when the green light is off indicating the camera is fully
charged.
Attention: As the device has built-in high-capacity polymer lithium battery, it has a
memory function. Sowe advise at the first 5 times of usage, please charge the battery
fully after the battery is out of use, so that the battery can work with its max working
hours perfectly.
Playback video
Connect the device to your computer via USB cable, click the removable disk and find
the video then you can play the video. Please make sure that you have installed
related software before playing the video.
Setting time
When using the device for the first time or the time is incorrect, you can reset the time
through the following way:
1) Connect the camera to the computer.
2) Insert the user manual CD to the computer.
3) Click the setting time tool of the manual CD which names “Setting Time Tool
V2.0”.
4) Then the time of the camera will be synchronized with the computer.
5) Revise the time of the computer then you can get the time you want.

Attention
1) Under standby mode, the camera will shut down itself if without any operation
within 1 minute.
2) When recording, the camera will save the data first then shut down if lacking of
power.
3) When last recording, the system of the camera will create a new video file after
every operation.
4) It needs some time to save the data, please don’t do any operation during the
process of light switching; otherwise the data may be lost.
5) Under a bright environment, keep camera vertical, stable and keep certain
distance from the scene you want to record in order to achieve a best effect
6) The time for computer with different system configuration to identify the hardware
is slightly different. During this period, please wait for a moment. If computer can’t
recognize the device, please make sure your operating system, drivers and USB
interface cable in are good working order, and then connect it again.