Viking 57085 User manual

23c
1. Turn Jump Starter's
Clamp Power Switch OFF.
2. Turn Vehicle's Ignition OFF.
OFFOFF
ON
ON
57085
WARNING
To prevent serious injury:
1. Do not touch positive and negative
battery clamps together.
2. Do not connect to the negative
terminal of the battery.
3. Read manual before
set up and/or use.
AFTER VEHICLE STARTS
1. Turn Jump Starter's
Clamp Power Switch OFF.
2. Remove Black Negative Clamp.
3. Remove Red Positive Clamp.
4. Recharge Jump Starter
immediately.
3. Connect Red Positive Clamp,
then connect Black Negative
Clamp to a non-moving
metal part of the vehicle.
+_
Grounded
Metal

4. To begin inflation, open Air Switch
cover on back and turn Switch on.
5. Compressor will shut off when
pressure has been reached.
6. Turn Air Switch off.
7. Press TEST/AIR button to turn
off Compressor power.
DUTY CYCLE: 15 min on, 30 min off
1. Remove Air Hose and install
adapter as needed.
2. Press TEST/AIR button on front
until -C- appears on display.
3. Attach Inflator, then set
pressure on Pressure Gauge.
Typical DC Appliances & Run Times
Appliance Est. Power
(Watts)
Est. Lifetime
(Hours)
• Fluorescent Light
• Cell Phone 450
• Fan
• Depth Finder 926
• Video Recorder
• Spotlight 15 14
• Small Power Tool
• Bilge Pump 24 8
• Electric Cooler 48 3
• Air Compressor 80 2
WARNING
To prevent serious injury: 1. Check the proper inflation level of the object
being inflated. 2. Monitor the Air Pressure Gauge. 3. Do not overinflate.
23c
57085