
9
YEAR WARRANTY
1300 663 907
MODEL: AP200038 PRODUCT CODE: 702763 12/2020
Using the Back & Body Hair Trimmer
Always inspect the appliance before use to ensure the blade is free
from hair, debris etc. For best performance, use on clean, dry hair.
Before shaving back or body hair, take a quick shower to clean up,
and then wait a few minutes to cool and dry off
1. Open the handle to the desired position. There are 8 positions
to choose from depending on the angle you require. See right
for positions available.
2. Switch on using the On/Off switch.
3. Start shaving your back, covering larger areas rst. Avoid any
moles or scars that may be sensitive. Go against the growth
of your hair, where possible. Body hair is often patchy, so you
may need to change directions regularly to achieve a really
close shave.
4. To nish up, rinse your back and shoulders with cool water. Then pat the skin dry and
apply skin-soothing lotion.
5. Next, move on to sensitive areas, or areas that require more precision. A well-placed
mirror will help greatly.
6. Switch off using the On/Off switch.
7. Always clean the Back & Body Hair Trimmer after every use.
NOTE:
• In between hair removal sessions, some light maintenance is required. Use a shower gel with
exfoliating agents, or a scrubbing bath tool to avoid in grown hairs.
• During your initial use or whenever hair is longer, it is recommended to go slowly as longer
hairs can pull or pinch.
CAUTION: To avoid skin or ngers being pinched in between the two sections of the handle,
please use care when opening and closing the handle
Removing and installing the blade
To remove the blade for cleaning, ensure the appliance is switched
off then place your ngertips behind the ridge on the top of the
blade and gently pull towards you.
To install the blade, align the blade with the opening in the Back &
Body Hair Trimmer and gently push until the blade clicks back into
place.
Usage