ViSAGE MAXIMUS AP200040 User manual

Model Number: AP200040
Product Number: 702764
Version 1.5 - Issued 03/08/20
INSTRUCTION MANUAL
.

2
AFTER SALES SUPPORT
YEAR WARRANTY
1
1300 663 907
AUScustomercar[email protected]
MODEL: AP200040 PRODUCT CODE: 702764 12/2020
.
.
Welcome
Congratulations on purchasing a Visage® product. All products brought to you by Visage® are
manufactured to the highest standards of performance and safety, as part of our philosophy of
customer service and satisfaction. We offer a comprehensive 1 Year Warranty.
We hope you will enjoy using your Cordless Rapid Hair Clippers for many years to come.

3
AFTER SALES SUPPORT
YEAR WARRANTY
1
1300 663 907
AUScustomercar[email protected]
MODEL: AP200040 PRODUCT CODE: 702764 12/2020
.
.
Contents
Welcome 2
Warranty Details 4
General Safety Instructions 6
Product Overview 8
Features 8
Technical Specications 8
Assembly & Parts List 9
Getting Started 10
Before Cutting Hair 10
Charging the Battery 10
Optimising the Lifetime of the Rechargeable Batteries 10
Changing the Combs 10
Lubricating the Blades 10
Tips for Cutting Hair 12
Outlining 12
Disposal 13
Cleaning & Maintenance 13
Storage 13
FAQs 14
Repair and Refurbished Goods or Parts Notice 15

4
.
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period
of 12 months from the date of purchase. Defects that occur within this warranty period, under
normal use and care, will be repaired, replaced or refunded at our discretion. The benets
conferred by this warranty are in addition to all rights and remedies in respect of the product
that the consumer has under the Competition and Consumer Act 2010 and similar state and
territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage.You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
AFTER SALES SUPPORT
REGISTER YOUR PURCHASE ATwww.aldi.com.au/en/about-aldi/product-registration/TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
1300 663 907
AUS YEAR WARRANTY
1
RAPID HAIR CLIPPERS
[e-mail]
MODEL: AP200040 PRODUCT CODE: 702764 12/2020
.

5
.
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period
of 12 months from the date of purchase. Defects that occur within this warranty period, under
normal use and care, will be repaired, replaced or refunded at our discretion. The benets
conferred by this warranty are in addition to all rights and remedies in respect of the product
that the consumer has under the Competition and Consumer Act 2010 and similar state and
territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage.You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
AFTER SALES SUPPORT
REGISTER YOUR PURCHASE ATwww.aldi.com.au/en/about-aldi/product-registration/TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
1300 663 907
AUS YEAR WARRANTY
1
RAPID HAIR CLIPPERS
[e-mail]
MODEL: AP200040 PRODUCT CODE: 702764 12/2020
Warranty Note
If you experience any issues with this product, or its
performance is not what you had expected, please
contact us at Balco Brands
It is likely that we can resolve any problems for you
via phone or email.
We can be reached on:
Phone: [phone] (Mon - Fri; 8:30am - 6:00pm EST)
Email: [email protected]
Web: www.balcobrands.com

6
AFTER SALES SUPPORT
YEAR WARRANTY
1
1300 663 907
AUScustomercar[email protected]
MODEL: AP200040 PRODUCT CODE: 702764 12/2020
.
.
General Safety Instructions
Before using the appliance for the rst time, you must read and understand the operation
manual completely
General Safety Warnings
1. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. Always check the appliance before you use it. Do not use the appliance if the
blades are damaged or broken, as this may cause injury.
4. Always make sure blades are aligned properly.
5. This appliance is intended for cutting human hair only.
6. Do not use the appliance to cut articial hair or animal hair.
7. This appliance must only be supplied at safety extra low voltage corresponding
to the marking on the appliance.
8. This appliance contains batteries that are non-replaceable.
9. This appliance is intended for domestic use only. It is not intended for
commercial, trade or industrial use.
10. Do not operate with aerosol spray products or where oxygen is being
administered.
11. Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.
12. Use, charge and store the appliance at a temperature between 15°C and 35°C.
13. Do not place or drop into water or other liquid.
14. Do not use in dusty conditions.
15. Do not drop the appliance. Dropping or rough use of the unit may cause damage.
16. Unless charging, always unplug this appliance from the power point immediately
after use and after charging.
17. Keep the appliance and USB charging cable away from heat sources and hot
surfaces.
18. Always protect the USB charging cable from undue exing and wearing – do not
allow the cable to hang off edge of the counter or table.
19. The supplier is not responsible for the end use of this appliance including any
improper use or when used for purposes that are not specied.
20. Do not attempt to repair, open or alter any components of this appliance. In the
case of improper usage or if you have opened, altered and repaired the product
yourself, all guarantees are void.

7
AFTER SALES SUPPORT
YEAR WARRANTY
1
1300 663 907
AUScustomercar[email protected]
MODEL: AP200040 PRODUCT CODE: 702764 12/2020
.
.
21. The supplier does not accept responsibility for additional or consequential
damage other than covered by legal product responsibility.
22. The supply terminals are not to be short-circuited.
23. WARNING: Detach the hand-held part from the supply cord and seal the supply
terminals before cleaning it in water.
24. Do not place or store the appliance where it can fall or be pulled into a sink or
bath.
25. The water resistance rating of this appliance is IPX5, which means it is suitable
for cleaning under an open water tap.
Suitable for cleaning under an open water tap
This product has been tested to AS/NZS 60335.1 and AS/NZS 60335.2.8.

8
AFTER SALES SUPPORT
YEAR WARRANTY
1
1300 663 907
AUScustomercar[email protected]
MODEL: AP200040 PRODUCT CODE: 702764 12/2020
.
.
Product Overview
Features
• 9 cutting guide combs: (1.5, 2, 2.5, 3, 4.5, 6, 9, 12, 15mm)
• Ergonomic Design
• Water Resistant: IPX5
• Fast Charge 10 minutes for 5 minutes trimming time
• Detachable cutting blade for easy cleaning
• LED indicator light
Technical Specications
Model Specication: AP200040
Warranty: 1 Year
Battery: 700mAh
Indicators: LED charging indicator
Power system: Cordless (rechargeable)
Input Rating: 5V
Water resistance rating: IPX5

9
AFTER SALES SUPPORT
YEAR WARRANTY
1
1300 663 907
AUScustomercar[email protected]
MODEL: AP200040 PRODUCT CODE: 702764 12/2020
.
.
Product Overview
1. USB charging cable
2. 9 x guide combs
3. Charging indicator light
4. On off switch
5. Charging port
6. Oil*
7. Cleaning brush*
8. Storage pouch*
9. Instruction Manual*
10. Getting started guide*
11. Warranty Card*
* Not pictured
Assembly & Parts List
1
2
3
5
4

10
AFTER SALES SUPPORT
YEAR WARRANTY
1
1300 663 907
AUScustomercar[email protected]
MODEL: AP200040 PRODUCT CODE: 702764 12/2020
.
.
Getting Started
Before Cutting Hair
Remove any packaging material and labels before using your Rapid Hair Clippers for the rst
time. Fully unwind the USB cord and inspect it for damage. Do not use the appliance if any part
has been damaged. In case of damage, contact our after-sales support line for advice on a
replacement or return.
Charging the Battery
• Before using your Rapid Hair Clippers for the rst time, charge it fully for 4 hours
• Plug the USB charging cord into your Rapid Hair Clippers and then plug the USB end into a
USB power source. Please ensure that the Rapid Hair Clippers ON/OFF switch is OFF. The
charging indicator light will glow red to indicate that it is charging and turns to green once
fully charged
Optimising the Lifetime of the Rechargeable Batteries
Discharge the rechargeable batteries completely twice a year by
letting the motor run until it stops. Then fully recharge the batteries.
Changing the Combs
• Switch the clipper off before changing the combs
• To attach the guide comb, hook the front edge of the guide comb
to the front teeth of the blade. Push the back of the guide comb
down until you hear a “click”. The guide comb is now in place. (See g 1. for reference)
• To remove the guide comb, pull the release tab on the back of the guide comb until it clicks
off the blade.
• Use the Rapid Hair Clippers without any combs for the closest possible cut.
WARNING! INJURIES & MATERIAL DAMAGE DUE TO INCORRECT HANDLING. DO
NOT USE THE APPLIANCE IF THE TEETH ARE DAMAGED OR MISSING FROM
THE BLADE OR IF THE BLADES ARE MISALIGNED AS INJURY MAY OCCUR
Lubricating the Blades
It is highly recommended before each use to lubricate the blades with
the oil provided. This ensures optimum cutting performance.
1. Plug the USB cord into a USB power adaptor and ensure it is
switched ON
2. Use the oil supplied to lubricate the Rapid Hair Clippers.
Unscrew the cap and cut off the tip of the oil tube with a pair of
scissors
3. Switch on the Rapid Hair Clippers, then gently squeeze the oil
tube, applying 2 drops onto the blades (Fig 2). Leave the Rapid Hair Clippers switched ON
for a further few seconds to allow the oil spread thoroughly along the length of the blades.
Then, switch OFF the unit and remove any excess oil using a cloth
NOTE: To lubricate the blades, ensure the unit is switched ON.
2
1