VISIOR GAMES ViSigame User manual

Version 1.0 / 2021
Installation
manual

Warning!
Important Safety Instructions
CAUTION!
OPENING THE DEVICE MIGHT RESULT IN
ELECTRICAL SHOCK
Do not distract others while they
are installing the product.
Any changes or modications to the
devices hardware or software will
void the warranty of the device and
may cause the device not to work
properly.
The trampoline and its
surroundings must always comply
with local standards for trampolines.
If the instructions contradict the
local regulations please disregard
them.
Keep the device away from any
contact with water. Warranty void
after water damage.
For indoor use only.
Keep the device away from re.
Warranty void after re damage.
Installation should be performed by
authorized personnel.
Be sure to take all anti-static
precautions.
Optimum operating temperature
is from 5°C to 30°C. Avoid extreme
uctuations of temperature.
Wear appropriate clothing: Do not
wear loose clothing or jewellery.
These instructions apply to the
device itself. Please read the manual
before operation.
Long hair should be tied back. Visually check the product for any
signs of damage, component failure
and/or missing parts.
Tidy back any loose cables that
could become a tripping hazard.
Always use designated buttons on
the designated system.
Immediately inform Visior games
for maintenance advice if you have
concerns.
VISI GAME – INSTALLATION MANUAL
2

Contents
What’s in the box? 4
Full setup 5
First time setup 6
Installation checklist 8
Powering on for the first time 9
In play safety guidelines 9
Maintenance 9
Game objective 10
Troubleshooting 11
www.visiorgames.com 3

What’s in the box?
Computing device
1 x
A
Remote control for monitor*
1 x
D
230V Power Strip – 5 ways
1 x
B
Euro power cord
1 x
E
Monitor
1 x
C
Installation manual
* 2x AA batteries not included
POWER - Turns the monitor ON
or OFF.
MUTE - Turns on of off the mute
function when the Menu is not
displayed.
SOURCE LIST - Selects the source.
Press ▲ or ▼ button to select from
HDMI1, HDMI2, HDMI3, DV-I,
DisplayPort, VGA, SDM, Media Player,
Browser, iiSignage, PDF Player or
Custom. The game uses DisplayPort
so make sure this source is selected.
Press [OK] button to conrm and exit.
VOLUME - Increases / decreases the
sound volume.
VISI GAME – INSTALLATION MANUAL
4

Full setup
Computing device
Internet
220 V Power
supply cable
Local
Display port
connection (P)
Reset button
Optical sensor
Full setup
Monitor
Computing device
Euro power cordEuro power cord Euro power cord
Second
Computing
device
Second
Monitor
Display port
connection
~220 V
Ethernet cable
(not included)
Power Strip
Internet
www.visiorgames.com 5

First time setup
A typical installation should take 2 people around 45 minutes.
Ensure there is nobody on the trampoline when
installing the device.
Provide internet connection point. All of the
Visiorgames products need to connect to the
internet. If you own more than one device,
provide internet access to the device in the
center of the park and connect the devices via
router or hub provided by us.
Connect the ethernet cable to the Visi Game
Computing device into the port labeled
“Internet”.
Provide 230V 5A for the device.
STEP 01
STEP 02
STEP 03
The internet connection should
come from your router/switch and
be plugged into the port named
“internet”, on the side of the Visi
Game computing device (A).
On the other side of the box there
is a display Port connection (P)
that should be connected to the
monitor (C).
Connect monitor (C) to the Power
strip (B) with Euro power cord.
Power strip (B) can also be used to
turn the game on or off.
Ethernet
cable
C
P
B
Monitor
Computing
device
VISI GAME – INSTALLATION MANUAL
6

Installation checklist
CHECK 1
Pre-power up checkups
Mounted onto construction designed for the game.
Make sure that all cables are connected:
DisplayPort cable from computing device to screen
Ethernet cable with internet connection to socket labeled “Internet”
If dual system, ethernet cable from one side to the other labeled “local”
Screen power cable to electricity
Computing devices power to electricity
All xings are tight and secure.
No signs of damage, component failure and/or missing parts.
No trapped and/or pinched cables.
No loose cables that could become a tripping hazard.
Make sure there is no strain on the cables and the connectors.
All electrical components are away from contact with water and heat sources.
CHECK 2
Power up
Monitor and computing device must power on by itself when connected to power.
It usually takes around 1 min for the system to boot up. You will be presented with the
game choosing screen when done.
At this time the game is set for the rst test.
CHECK 3
Start a game
Position yourself in front of the screen, move from left to right to choose the game and
jump to start a game.
CHECK 4
Ready for use
Play area is clear.
www.visiorgames.com 7

System Operation
The game system is designed to start working immediately after being turned on and can be turned off
anytime. Please take care to have at least a minute between turn on/off/on state changes.
Turn on procedure
Apply power to the main power line.
This depends on your installation type, it can be a fuse box, or a main power switch. You can also use the power
strip mounted just below the TV.
Turn off procedure
Remove the unit from power, via a switch or a fuse box / main power.
In play safety guidelines
Before beginning any exercise program, it is recommended that you consult with your doctor.
Children under the age of 8 must always be supervised by an adult when using the equipment.
Visually check the equipment before using it, for any signs of damage, component failure or loose
cables that could become a tripping hazard.
Wear appropriate clothing. Anti slip socks must be worn while using the equipment.
Remove all items from your pockets prior to participation.
Practice being in control of your bounce before using the equipment. Be aware of how to bend your
knees to control or stop your bounce. Always stay in control. Uncontrolled jumps or falls are likely to
result in injuries to yourself and others.
Don’t drink or eat while playing the game.
Maintenance
• Use a simple cloth to clean any dust that may be on the visi game computing device
• Use a microber cloth to wipe the camera, at least once a month.
VISI GAME – INSTALLATION MANUAL
8

Game objective
1. This is the start screen.
3. Choose the game you want to play by moving left
and right. Jump to start the game.
1. Stand on the trampoline in front of the game. The
Visior system starts calibrating to your height (2 sec.).
4. If you don’t jump for 7 seconds, or if you leave the
trampoline area, the game is stopped and return to
the main screen.
GAME OVER
2 sec.
7 sec.
www.visiorgames.com 9

Games
Jumpy Raven
The goal of the game is to pickup as many coins as
you can in the game play time, avoid clouds because
they slow you down and pick up rockets which allow
you to pick up more coins.
Bubble Pop Rabbit
The object is to pop as many bubbles as you can in the
time you have, some bubbles are special and give you
extra bonuses and also color the rabbit.
Jump Fighter
Ward of as many enemies as you can, the game is
not time bound but you get more and more enemies
coming. Try to stay in the game as long as you can,
trying to get as much points as possible.
VISI GAME – INSTALLATION MANUAL
10

Troubleshooting
The system doesn’t power on:
• Check the power connection to the system.
• Check the display power and DisplayPort connection
The game won’t start:
• The display must be turned on, press the power button or use the remote control to turn it on (it
should turn on automatically)
• If you have issues please contact us at: [email protected]
On power up the logo on the computing device is lit,
but there is no picture
• Try to turn the computer in the computing device
on by pressing the power button in the case with
a pen. The access is on the left side of the case
There is no picture on the display:
• Check the display power cable.
• Check if the system is turned on.
• Check the HDMI connection from the PC to the display. After checking the cables,
turn the system off, wait a minute and turn it back on.
• If everything seems in order but no picture is displayed please contact us at
[email protected]
www.visiorgames.com 11

VISIOR GAMES d.o.o.
Dolga Reber 9, 6000 Koper, Slovenia
E: [e-mail]
T: [phone]
SUPPORT24/7/365
We are happy to answer any of your questions and solve
all your problems regarding our products.
E: [email protected]
T: [phone]
We are also reacheable via Viber, WhatsApp
and Telegram.