VISIOR GAMES ViSiTOUCH User manual

Version 1.0 / 2021
Installation
manual

Warning!
Important Safety Instructions
CAUTION!
OPENING THE DEVICE MIGHT RESULT IN
ELECTRICAL SHOCK
Do not distract others while they
are installing the product.
Any changes or modications to the
devices hardware or software will
void the warranty of the device and
may cause the device not to work
properly.
The trampoline and its
surroundings must always comply
with local standards for trampolines.
If the instructions contradict the
local regulations please disregard
them.
Keep the device away from any
contact with water. Warranty void
after water damage.
For indoor use only.
Keep the device away from re.
Warranty void after re damage.
Installation should be performed by
authorized personnel.
Be sure to take all anti-static
precautions.
Optimum operating temperature
is from 5°C to 30°C. Avoid extreme
uctuations of temperature.
Wear appropriate clothing: Do not
wear loose clothing or jewellery.
These instructions apply to the
device itself. Please read the manual
before operation.
Long hair should be tied back. Visually check the product for any
signs of damage, component failure
and/or missing parts.
Tidy back any loose cables that
could become a tripping hazard.
Always use designated buttons on
the designated system.
Immediately inform Visior games
for maintenance advice if you have
concerns.
VISI TOUCH – INSTALLATION MANUAL
2

Contents
What’s in the box? 4
Full setup 5
First time setup 6
Installation checklist 9
Powering on for the first time 10
In play safety guidelines 10
Maintenance 10
Game objective 11
Troubleshooting 12
www.visiorgames.com 3

What’s in the box?
FOR MONITOR MOUNT FOR BUTTONS
Left button*
5 x
A
Agregator box
2 x
D
Right button*
5 x
B
Can Bus cable
2 x
E
Computer
1 x
C
Monitor
1 x
F
Monitor mount*
2 x
P
Installation manual
Screws
4 x
L
Wing nuts
20 x
N
Spacers
4 x
M
Spacers
20 x
O
Euro power cord
2 x
G
AC/DC power
supply
1 x
H
HDMI cable
1 x
J
USB cable
1 x
I
* Button left / right designation is marked on
the button itself and on the end of its cable.
* Button left / right designation is marked on
the button itself and on the end of its cable.
* Optional, depends on
construction integration type.
VISI TOUCH – INSTALLATION MANUAL
4

~220 V
~220 V
Full setup
Computer inputs
Full setup
Left buttons Right buttons
Monitor
Computer
Agregator box
AC/DC power
supply
HMDI cable USB cable
Euro power
cord
Euro power
cord
Agregator box
Can Bus cable
Ethernet cable
(not included)
Can Bus cable
L R
AC/DC power supply
CAN connection to
aggregator box
CAN connection to
aggregator box
USB
HMDI
Ethernet
www.visiorgames.com 5

STEP 02b
First time setup
A typical installation should take 2 people around 45 minutes.
Insure there is nobody on the trampoline when
installing the device.
Provide 230V 5A for the device.
Provide internet connection point. All of the Visior-
games products need to connect to the internet.
If you own more than one device, provide internet
access to the device in the center of the park and
connect the devices via router or hub provided by us.
Make sure that the buttons are correctly
oriented and clear of any obstructions.
The buttons are pre assigned to only one
computer that came with the game set, you
can’t switch them with other systems. And they
are also assigned to the correct side.
The labels on the buttons dene a number thatis
correlated to the correct computer’s serial code.
Make sure the electrical power is off during
installation.
STEP 01
Install Left buttons (A) to the one
side of the cube and Stop buttons
(B) to the other of the cube.
STEP 02a
Install the monitor (F) onto the
construction.
5xB
∅ 6mm
5xA
F
Installation directly on the wall:
drill 4 holes (6mm) for the monitor
screw points and use the supplied
screws (L) and spacers (M).
M
L
VISI TOUCH – INSTALLATION MANUAL
6

STEP 03
STEP 04
N
O
N
O
3xB
3xA
O
!
Fasten Left button and Right button to
the construction with the provided wing
nuts (N) and spacers (O).
Avoid trapped and pinched cables.
!
Follow the labels on the buttons
cables when you instal them. “L” for
left and “R” for right, because the
button congurations are saved on the
computer(they can’t be redened by
the user).
Be careful to tighten all connectors
to the aggregator boxes (D).
!
L 0001
D
L
L
!
1L
1R
A
B
D
STEP 05
Connect the computer (C) to aggregator
boxes with the Can Bus cable (E).
Aggregators are labeled L 0001, R 0001.
When connecting the cables be
careful to tighten all connectors
to the aggregator boxes and the
computer.
1
GO
2
GO
3
GO
L 0001
1
GO
2
GO
3
GO
R 0001
INPUTS
E
E
!
C
STEP 06
Connect the monitor (F) to the wall
power with Euro power cord (G).
Connect HDMI cable (J) from the
computer to the monitor.
FG
J
SERIAL NUMBER
2105-02-*0001*
www.visiorgames.com 7

Connect LAN and DC power connection
to the computer
STEP 08
Cables should be mounted every 50cm.
Secure loose cables.
!
STEP 07
Connect the ethernet cable with
internet access (cable not included) to
computer’s (C) ethernet port. Connect
the USB cable (I) from the display to the
computer. Connect the AC/DC power
supply (H) to the computer.
The computer should be mounted so
that the HDMI port points upward.
50 cm
SERIAL NUMBER
2105-02-*0001*
C
J
H
I
Ethernet
cable
VISI TOUCH – INSTALLATION MANUAL
8

CHECK 1
Pre-power up checkups
Mounted onto a wall designed for the game.
All buttons are connected to separate aggregator boxes.
There are two cables connected from aggregator boxes to the computer and connectors tighten.
Make sure the ethernet cable with internet access is connected to the computer.
Make sure the display is connected with HDMI and USB cables.
All xings are tight and secure.
No signs of damage, component failure and/or missing parts.
No trapped and/or pinched cables.
No loose cables that could become a tripping hazard.
Make sure there is no strain on the cables and the connectors.
All electrical components are away from contact with water and heat sources.
CHECK 2
Power up
All buttons light up for a brief moment.
The display is turning on.
Game start screen appears on the display after around 1 minute.
Go! sound is heard at startup.
All buttons are dim before the start of the game.
CHECK 3
Press start on display
The clock starts the countdown on the display.
The buttons light at the right side when starting the game.
All buttons ash when hit.
Sounds can be heard when the buttons are hit.
The hits are registered on the display.
Sounds are heard after the correct hit.
CHECK 4
Ready for use
Play area is clear.
Installation checklist
www.visiorgames.com 9

Powering on for the first time
Make sure that all cables are connected to
the aggregator boxes and the computer and
connectors tightened.
Make sure that the buttons are on the correct
side of the cube relative to the monitor.
When you power the system on the buttons
go over the programmed sequence and light
up RGB for a brief moment when the power is
provided by the computer.
After the rst sequence the buttons go dim and
are awaiting the game to start.
Monitor must power on by itself when
connected to power.
It usually takes around 1min for the system
to boot up. When ready you will hire the GO
sound.
At this time the game is set for the rst test.
Press start on the monitor and check that the
buttons are in the right positions by playing
onegame.
1
2
5
7
4
3
6
8
In play safety guidelines
Before beginning any exercise program, it is recommended that you consult with your doctor.
Children under the age of 8 must always be supervised by an adult when using the equipment.
Visually check the equipment before using it, for any signs of damage, component failure or loose
cables that could become a tripping hazard.
Wear appropriate clothing. Anti slip socks must be worn while using the equipment.
Remove all items from your pockets prior to participation.
Practice being in control of your bounce before using the equipment. Be aware of how to bend your
knees to control or stop your bounce. Always stay in control. Uncontrolled jumps or falls are likely to
result in injuries to yourself and others.
Don’t drink or eat while playing the game.
Maintenance
• The device is easily damaged if you put excessive pressure on the display or other components.
• If not in use for a long period of time please disconnect the device from power.
• Disconnect the device when cleaning with a slight damp cloth. The display and buttons may be cleaned
with slightly damp cloth, but do not use any organic solvents to clean the device.
VISI TOUCH – INSTALLATION MANUAL
10

Game objective
1. This is the start screen.
3. If two players want to play they press “START DUEL”
on the display.
6. The player with the most points after one
minute wins.
2. You can choose one player mode by pressing
“START LEFT” or “START RIGHT” on the display.
4. Press the buttons on your side of cube as
they light up as fast as you can.
www.visiorgames.com 11

Troubleshooting
The system doesn’t power on:
• Check the power connection to the system.
• Check the display power and HDMI connection.
The game won’t start, Touch screen doesn’t work:
• Check the USB connection from the computer to the monitor.
• The display must be turned on in order for touchscreen to work.
One or more of the buttons are not assigned to the right side of the game:
• Check the markings on the buttons and ensure they are correctly inserted.
One or more buttons don’t light up:
• Check if the system is turned on.
• Check the connection from the button to the aggregator box and the connection to
thecomputer.
• If the connections are ok please contact us at: [email protected].
On one or more buttons the green light is on when no contact is made with the button:
• Restart the system and wait for the startup cycle. Check the button again.
• If the lights in the button are constantly green please contact us at:
[email protected]
There is no picture on the display:
• Check the display power cable.
• Check if the system is turned on.
• Check the HDMI connection from the PC to the display.
• If everything seems in order but no picture is displayed please contact us at
[email protected].
VISIOR GAMES d.o.o.
Dolga Reber 9, 6000 Koper, Slovenia
E: [e-mail]
T: [phone]
SUPPORT 24/7/365
We are happy to answer any of your questions and solve
all your problems regarding our products.
E: [email protected]
T: [phone]
We are also reacheable via Viber, WhatsApp
and Telegram.