Vivitar Vivicam 3785 User manual

1
11
1
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for Class B digital devices,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If
such changes or modifications should be made, you could be required to stop operation of the equipment.

2
E
F
S
G
READ THIS FIRST
Trademark Information
Microsoft®and Windows®are U.S. registered trademarks of Microsoft Corporation.
Pentium®is a registered trademark of Intel Corporation.
 Macintosh is a trademark of Apple Computer, Inc.
SDTM, PhotoSuite and PhotoVista are trademarks.
Other names and products may be trademarks or registered trademarks of their respective owners.
Product Information
Product design and specifications are subject to change without notice. This includes primary product
specifications, software, software drivers, and user’s manual. This User’s Manual is a general reference guide
for the product.
The product and accessories that come with your camera may be different from those described in this manual.
This is due to the fact that different retailers often specify slightly different product inclusions and accessories
to suit their market requirements, customer demographics, and geographical preferences. Products very
often vary between retailers especially with accessories such as batteries, chargers, memory cards, cables,
carrying cases/pouches, and language support. Occasionally a retailer will specify a unique product color,
appearance, and internal memory capacity. Contact your dealer for precise product definition and included
accessories.
The manufacturer assumes no liability for any errors or discrepancies in this user’s manual.
For user manual and driver updates, refer to the Vivitar website.

3
33
3
SAFETY INSTRUCTIONS
Read and understand all Warnings and Cautions before using this product.
Warnings
If foreign objects or water have entered the camera, turn the power OFF and remove
the batteries.
Continued use in this state might cause fire or electric shock. Consult the store of purchase.
If the camera has fallen or its case has been damaged, turn the power OFF and
remove the batteries.
Continued use in this state might cause fire or electric shock. Consult the store of purchase.
Do not disassemble, change or repair the camera.
This might cause fire or electric shock. For repair or internal inspection, ask the store of purchase.
Do not use the camera in areas near water.
This might cause fire or electric shock. Take special care during rain, snow, on the beach, or near the
shore.
Do not place the camera on inclined or unstable surfaces.
This might cause the camera to fall or tilt over, causing injury.
Keep the batteries out of the reach of children.
Swallowing batteries might cause poisoning. If the battery is accidentally swallowed, immediately
consult a physician.
Do not use the camera while you are walking, driving or riding a motorcycle.
This might cause you to fall over or result in traffic accident.

4
E
F
S
G
Cautions
Insert the batteries paying careful attention to the polarity (+ or –) of the terminals.
Inserting the batteries with its polarities inverted might cause fire and injury, or damage to the
surrounding areas due to the battery rupturing or leaking.
Do not fire the flash close to anyone’s eyes.
This might cause damage to the person’s eyesight.
Do not subject the LCD monitor to impact.
This might damage the glass on the screen or cause the internal fluid to leak. If the inter nal fluid
enters your eyes or comes into contact with your body or clothes, rinse with fresh water. If the internal
fluid has entered your eyes, consult a physician to receive treatment.
A camera is a precision instrument. Do not drop it, strike it or use excessive force
when handling the camera.
This might cause damage to the camera.
Do not use the camera in humid, steamy, smoky, or dusty places.
This might cause fire or electric shock.
Do not remove the battery immediately after long period of continuous use.
The battery becomes hot during use. Touching a hot battery might cause burns.
Do not wrap the camera or place it in cloth or blankets.
This might cause heat to build up and deform the case, resulting in fire. Use the camera in a well-
ventilated place.
Do not leave the camera in places where the temperature may rise significantly,
such as inside a car.
This might adversely affect the case or the parts inside, resulting in fire.
Before you move the camera, disconnect cords and cables.
Failure to do this might damage cords and cables, resulting in fire and electric shock.
WARNING: Handling the USB on this product may expose you to lead, a chemical known to the
State of California to cause birth defects or other reproductive harm. Wash hands after handling.

5
55
5
Notes on Battery Usage
Do not use batteries other than those specified for use with your VIVICAM 3785. Use of unsuitable batteries
may result in the batteries splitting, or leaking and may cause a fire, injury, or soiling of the battery compartment.
When placing the batteries into the VIVICAM 3785, check the polarity markings on the batteries ( - and + ) to
ensure that the batteries are inserted correctly. Incorrect battery polarity will result in VIVICAM 3785 inoperability
and may result in the batteries splitting or leaking and causing a fire, injury, or soiling of the battery compartment.
Remove the batteries if the VIVICAM 3785 will not be used for an extended period of time. The batteries may
leak and cause a fire, injury or soiling of the battery compartment. If the batteries leak, clean and wipe the
battery compartment carefully and install new batteries. Wash your hands carefully if you touch the battery
fluid.
When using batteries, carefully read and strictly observe the Safety Instructions and the
notes described below:
Ni-MH rechargeable batteries are highly recommended. To maximize performance and lifetime, we recommend
that you fully charge the batteries and discharge them for at least one complete cycle before use.
Avoid using batteries in extremely cold environments as low temperatures can shorten the battery life and
reduce digital camera's performance. Low temperature will adversely affect alkaline battery performance.
Using new rechargeable batteries or rechargeable batteries that have not been used for an extended period of
time will affect the number of images that can be captured.
If you will not be using the batteries for an extended period of time, remove them from the camera to prevent
leakage or corrosion.
Never use batteries of different types (together) or mix old and new batteries. Never use manganese batteries.
More information about batteries is provided in this manual in subsequent sections.

6
E
F
S
G
CONTENTS
INTRODUCTION................................... 8
Overview...........................................................8
Package Contents............................................9
Optional Accessories .......................................9
PRODUCT FEATURES.......................... 10
Front View .........................................................10
Rear View..........................................................11
Multi-Selector................................................... 12
LED Indicators..................................................13
LCD Monitor Information ..................................14
PREPARING YOUR CAMERA ............... 18
Installing the Batteries (Optional Accessory)...18
Attaching the Camera Strap.............................18
Using an SD Memory Card
(Optional Accessory) .......................................19
Setting the Date and Time ...............................20
Choosing the Language ..................................20
BASIC FUNCTIONS ............................. 21
Turning the Power On.......................................21
Using the LCD Monitor.....................................21
Digital Zoom .....................................................22
Using the Flash ................................................22
Self-Timer .........................................................24
Setting the Image Resolution and Quality.........25
Recording Video Clips.......................................27
IMAGE PLAYBACK................................28
Single Image Replay.........................................28
Playback Zoom..................................................29
Viewing Nine Images at a Time.........................30
Viewing Video Clips..........................................31
Slide Show........................................................31
Protecting Images.............................................32
DELETING IMAGES................................33
Deleting Images/Video Clips Individually...........33
Deleting All Images and Video Clips................34
Formatting an SD Memory Card or Internal
Memory.............................................................35
TRANSFERRING RECORDED IMAGES/ VIDEO
CLIPS TO YOUR COMPUTER..................36
Step 1: Install the USB Driver on a Windows
Computer............................................37
Step 2: Connect the Camera to Your
Computer.............................................38
Step 3: Download Recorded Images and
Video Clips...........................................39

7
77
7
INSTALLING PHOTOSUITE.....................40
INSTALLING PHOTOVISTA.....................41
INSTALLING ACROBAT READER............42
USER MANUAL.......................................43
LIST OF MENU OPTIONS........................44
Capture Menu......................................................44
Playback Menu...................................................49
Video Clip Menu.................................................50
Setup Menu...........................................................51
CONNECTING YOUR CAMERA TO
OTHER DEVICES....................................53
CAMERA SPECIFICATIONS.....................54

8
E
F
S
G
INTRODUCTION
Overview
Your new ViviCam 3785 delivers high quality, 2048 x 1536 resolution images using a 3.0 Megapixel sensor.
An auto-flash sensor automatically detects the shooting (lighting) conditions and determines whether the flash
should be used. This feature helps ensure that your images turn out right.
6 MB internal (built-in) memory allows you to capture and store images without the immediate need for an additional
memory card. However, you may wish to expand the memory capacity by using a Secure Digital (SD) memory
card
In addition to still images, you can record short videos by using the movie function.
Images you have captured can be downloaded to your computer using the USB cable (A USB driver is required
for Windows 98SE). You can enhance and retouch your images on your computer by using the provided editing
software, or image editing software you may already own. You may share your images with your friends via e-mail,
in a report, or on a website.

9
99
9
Package Contents
Carefully unpack your ViviCam 3785 and ensure that you have the following items. In the event that any item is
missing or if you find any mismatch or damage, promptly contact to your dealer.
ViviCam 3785 Digital Camera Camera Strap
User’s Manual Software CD-ROM
USB Cable Camera Pouch
Optional Accessories
2 AA Batteries
Note
The product and accessories that come with your Vivicam 3785 may be different from those described in this
manual. This is due to the fact that different retailers often specify slightly different product inclusions and acces-
sories to suit their market requirements, customer demographics, and geographical preferences. Products very
often vary between retailers especially with accessories such as batteries, chargers, AC adapters, memory cards,
cables, carrying cases/pouches, and language support. Occasionally a retailer will specify a unique product color,
appearance, and internal memory capacity. Contact your dealer for precise product definition and included
accessories.

10
E
F
S
G
1. Shutter button
2. Power button
3. Flash
PRODUCT FEATURES
Front View
4. Lens
5. Strap eyelet
6. Self-timer LED
3
4
6
5
1
2

11
1111
11
Rear View
1. LED indicator
2. MODE button
3. Multi-selector
4. MENU button
5. USB port
6. Battery/SD card cover
7. Tripod socket
8. LCD monitor
7
8
6
1
5
4
2
3

12
E
F
S
G
Multi-Selector
1. Arrow button (Up)
Thumbnail button
2. Arrow button (Right)
Display button
3. OK button
Digital zoom button
4. Arrow button (Down)
Flash button
Delete button
5. Arrow button (Left)
Self-timer
5 2
3
1
4

13
1313
13
LED Indicators
Indicator Status Description/Activity Sound
LED indicator Solid red The ViviCam 3785 is powering up Yes *(1)
LED indicator Solid green The ViviCam 3785 is powered and ready Yes *(1)
LED indicator Blinking red ViviCam 3785 error Yes *(3)
LED indicator Blinking red Charging the flash No
LED indicator Blinking green Image is being recorded to memory No
LED indicator Solid red USB communication/transfer in progress No
LED indicator Solid green The ViviCam 3785 is ready to record images Yes *(1)
(or movies)
Self-timer indicator Blinking red The self-timer function is activated No
---- ---- Error message Yes *(3)
---- ---- Valid button event Yes *(1)
(1) The ViviCam 3785 sounds one beep.
(3) The ViviCam 3785 sounds three beeps.

14
E
F
S
G
LCD Monitor Information
1. Capture mode
2. Image resolution
[ ] 2048X1536
(Native 3 MP resolution)
[ ] 1600X1200
[ ] 1280X960
[ ] 640X480
3. Image quality
[ ] Fine
[ ] Normal
[ ] Economy
4. Sharpness
[
H
] High
[ ] Medium
[
L
] Low
5. ISO speed
(no indication for Auto)
Auto
[
ISO
100
] 100
[
ISO
200
] 200
6. Flash mode
[ ] Flash off
[ ] Fill flash (on)
[
A
] Red-eye reduction
[
A
] Automatic flash
7. Color mode
[ ] Full Color
[ ] Black & White
[ ] Sepia
8. [ ] Card indicator
(when present)
9. Remaining images
These indicators are displayed when capturing still images:
10. Battery level
[ ] Full
[ ] Partly consumed
[ ] Nearly exhausted
[ ] Virtually no battery power
11. [ ] Self-timer mode
12. White balance
(no indication for auto white balance)
Auto
[ ] Daylight
[ ] Cloudy
[ ] Tungsten
[ ] Fluorescent
13. EV compensation

15
1515
15
These indicators are displayed when playing images back:
1. Reverse
2. [ ] Card indicator (if present)
3. Forward
4. [ ] Protect indicator (if protected)
5. Current image/total number of images
6. Battery level
[ ] Full
[ ] Partly consumed
[ ] Nearly exhausted
[ ] Virtually no battery power
22/26

16
E
F
S
G
These indicators are displayed when recording video clips:
1. Movie mode
2. Recording indicator
3. Video counter
4. [ ] Card indicator (if present)
5. Battery level
[ ] Full
[ ] Partly consumed
[ ] Nearly exhausted
[ ] Virtually no battery power

17
1717
17
These indicators are displayed when playing video clips back:
1.Recorded time
2.[ ] Card indicator (if present)
3. Battery level
[ ] Full
[ ] Partly consumed
[ ] Nearly exhausted
[ ] Virtually no battery power
00:00

18
E
F
S
G
PREPARING YOUR VIVICAM 3785
Installing the Batteries (Optional Accessory)
You may use 2 AA size batteries (either Alkaline or Ni-MH) to power your Vivicam
3785. Most often the Vivicam 3785 will be shipped with two AA alkaline batteries.
These batteries are adequate to power-up the camera and demonstrate its
functionality for a limited period of time. Alkaline batteries are not recommended
for long-term use or extensive photography, however. A better choice is re-
chargeable NiMH (Nickel-Metal Hydride) batteries. NiMH rechargeable AA
batteries offer considerably better life with the added advantage of cost-effec-
tive recharging. The Vivicam 3785 can also use CR-V3 batteries. CR-V3 Lithium
batteries are available in most stores where batteries are sold. Lithium batter-
ies offer considerably better longevity. Rechargeable CR-V3 batteries are also
available on the market.
To install or replace the batteries:
1. Make sure your Vivicam 3785 is off.
2. Slide the battery/SD card cover.
3. Insert the batteries noting the correct polarity marks (+ or -).
4. Close the battery/SD card cover. Slide into locked position.
Attaching the Camera Strap
To prevent accidentally dropping your Vivicam 3785 , always use the
camera strap.
Attach the camera strap as follows:
1. Thread the small loop of the strap through the strap eyelet on the
Vivicam 3785 .
2. Pull the large loop through the small loop until the strap is firmly secured.

19
1919
19
Using an SD Memory Card (Optional Accessory)
Your Vivicam 3785 comes with approximately 6MB of internal memory,
allowing you to store images and video clips in the Vivicam 3785. However,
you can expand the memory capacity by using a Secure Digital (SD) memory
card. Optional SD memory cards provide removable, reusable storage for
images and video clips.
1. Make sure your Vivicam 3785 is off.
2. Open the SD card/battery cover.
3. Insert the SD memory card. (Contact pins first)
 If the card cannot be inserted, check the orientation.
4. Close the SD card/battery cover.
Note:
 To prevent valuable data from being accidentally erased from
an SD memory card you can slide the write protect tab (on the side of the
SD memory card) to “LOCK”.
 To save, edit, or erase data on an SD memory card, you must unlock the card.
If a memory card is present in the Vivicam 3785; the camera will
automatically use the card in preference to internal memory.
Be sure to format the memory card with this Vivicam 3785 before its
initial usage.
The Vivicam 3785, like most digital cameras will automatically use a memory card if it is inserted into the
memory card slot. This is called °ßcard preference°®. Data stored in internal memory will not be accessible
if a memory card is present. To again access your data stored in internal memory, simply remove the SD card.
To remove an SD memory card
1. Make sure your Vivicam 3785 is off.
2. Open the SD card/battery cover.
3. Press lightly on the edge of the memory card and it will eject.
Note:
Memory cards may become warm during use; observe caution when removing memory cards.
When a memory card is removed from the Vivicam 3785; the camera will automatically revert to using internal
memory.

20
E
F
S
G
Setting the Date and Time
The Date/Time screen will be presented if/when:
 The ViviCam 3785 is turned on for the first time.
 The ViviCam 3785 is turned on after removing the batteries for a long
period of time.
When the date and time setting screen appears, follow these steps to set
the correct date and time.
1. Enter the values of the year, month, day and the time by using
the / / / buttons.
 To increase the value, press the button.
 To decrease the value, press the button.
2. Press the button after all fields are set.
Choosing the Language
Follow the steps below to set the OSD (On-Screen Display) language.
1. Select a language that you prefer by using the / buttons.
2. Press the button to confirm.
Note:
 The language setting will be retained even if the ViviCam 3785 is turned off.