Vivitek DX6530 Series User manual

DX6530
DW6030
series
User’s Manual

— i —
Copyright
This publication, including all photographs, illustrations and software, is protected under international copy-
right laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be
reproduced without written consent of the author.
© Copyright 2013
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no repre-
sentations or warranties with respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
Trademark Recognition
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations and pend-
ing applications in other countries throughout the world.
All other product names used in this manual are the properties of their respective owners and are
acknowledged.

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r—
—
—D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
— ii —
Important Safety Information
Congratulations on purchasing the Vivitek DLP®projector!
Important:
It is strongly recommended that you read this section carefully before using the projector. These safety
and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this
manual for future reference.
Symbols Used
Warning symbols are used on the unit and in this manual to alert you of hazardous situations.
The following styles are used in this manual to alert you to important information.
Note:
Provides additional information on the topic at hand.
Important:
Provides additional information that should not be overlooked.
Caution:
Alerts you to situations that may damage the unit.
Warning:
Alerts you to situations that may damage the unit, create a hazardous environment, or cause personal
injury.
Throughout this manual, component parts and items in the OSD menus are denoted in bold font as in this
example:
“Push the Menu button on the remote control to open the Main menu.”
Remote Control
Some remote controls have a laser for pointing out items on a screen.
General Safety Information
Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts in
the unit. For servicing, contact qualified service personnel.
Follow all warnings and cautions in this manual and on the unit case.
The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into the
lens when the lamp is on.
Do not place the unit on an unstable surface, cart, or stand.
Avoid using the system near water, in direct sunlight, or near a heating device.
Do not place heavy objects such as books or bags on the unit.

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r—
—
—D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
–iii –
Power Safety
Only use the supplied power cord.
Do not place anything on the power cord. Place the power cord where it will not be in the way of
foot traffic.
Remove the batteries from the remote control when storing or not in use for a prolonged period.
Replacing the Lamp
Replacing the lamp can be hazardous if done incorrectly. See Replacing the Lamps on page 54 for clear
and safe instructions for this procedure. Before replacing the lamp:
Unplug the power cord.
Allow the lamp to cool for about one hour.
Important Recycle Instructions:
Lamp(s) inside this product contain mercury. This product may contain other electronic waste that
can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal
Laws. For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG. For lamp
specific disposal information check WWW.LAMPRECYCLE.ORG.
Cleaning the Projector
Unplug the power cord before cleaning. See Cleaning the projector on page 51.
Allow the lamp to cool for about one hour.
Regulatory Warnings
Before installing and using the projector, read the regulatory notices in the Regulatory Compliance section
on page 76.
Symbol Explanations
DISPOSAL: Do not use household or municipal waste collection services for
disposal of electrical and electronic equipment. EU countries require the use
of separate recycling collection services.

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r—
—
—D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
— iv —
Projector Installation Notice
Place the projector in a horizontal position
The tilt angle of the projector should not exceed 15 degrees, nor should the projector be in-
stalled in any way other than the desktop and ceiling mount, otherwise lamp life could decrease
dramatically, and may lead to other unpredictable damages.
Allow at least 50 cm clearance around the exhaust vent.
Ensure that the intake vents do not recycle hot air from the exhaust vent.
When operating the projector in an enclosed space, ensure that the surrounding air temperature
within the enclosure does not exceed operation temperature while the projector is running, and the
air intake and exhaust vents are unobstructed.
All enclosures should pass a certified thermal evaluation to ensure that the projector does not
recycle exhaust air, as this may cause the device to shutdown even if the enclosure temperature is
with the acceptable operation temperature range.
About this manual
This manual is intended for end users and describes how to install and operate the DLP projector. Wher-
ever possible, relevant information—such as an illustration and its description—has been kept on one
page. This printer-friendly format is both for your convenience and to help save paper, thereby protecting
the environment. It is suggested that you only print sections that are relevant to your needs.

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r—
—
—D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
–v –
Table of Contents
INTRODUCTION................................................................................................................................................................. 1
PACKING CHECKLIST........................................................................................................................................................... 1
VIEWS OF PROJECTOR PARTS............................................................................................................................................... 2
Front-right View ............................................................................................................................................................. 2
Bottom view..................................................................................................................................................................... 3
TOP FEATURES..................................................................................................................................................................... 4
OSD Controls and Status LEDs...................................................................................................................................... 4
TERMINAL PANEL FEATURES............................................................................................................................................... 5
REMOTE CONTROL .............................................................................................................................................................. 6
REMOTE CONTROL OPERATING RANGE............................................................................................................................... 7
SETUP AND OPERATION................................................................................................................................................. 8
INSERTING THE REMOTE CONTROL BATTERIES ................................................................................................................... 8
INSTALLING OR REMOVING THE OPTIONAL LENS ................................................................................................................ 9
Removing the Existing Lens From the Projector ............................................................................................................ 9
Installing the New Lens................................................................................................................................................. 10
THROW DISTANCE AND SCREEN SIZE ................................................................................................................................ 11
INSTALLING THE OPTIONAL COLOR WHEEL ...................................................................................................................... 13
MAKING CONNECTIONS..................................................................................................................................................... 15
Connecting Your PC or Macintosh Computer.............................................................................................................. 15
Connecting an External Monitor .................................................................................................................................. 16
Connecting Your DVD Player with Component Output ............................................................................................... 17
Connecting Your VCR or Laser Disc Player ................................................................................................................ 18
PROJECTING AN IMAGE (BASIC OPERATION)...................................................................................................... 19
TURNING ON THE PROJECTOR ............................................................................................................................................ 19
SELECTING AN INPUT SOURCE........................................................................................................................................... 20
ADJUSTING THE PICTURE POSITION AND PICTURE SIZE ..................................................................................................... 21
Adjusting Picture Position Manually............................................................................................................................ 21
Lens Shift Adjustable Range ......................................................................................................................................... 22
Adjusting the Projector Level ....................................................................................................................................... 22
OPTIMIZING AN RGB IMAGE AUTOMATICALLY................................................................................................................. 23
Adjusting the Image Using Auto Sync........................................................................................................................... 23
TURNING OFF THE PROJECTOR........................................................................................................................................... 24
About Direct Power Off ................................................................................................................................................ 25
After Use....................................................................................................................................................................... 25
CONVENIENT FEATURES............................................................................................................................................. 26
FREEZING A PICTURE......................................................................................................................................................... 26
ADJUSTING THE FOCUS/ZOOM MANUALLY ....................................................................................................................... 26
CHANGING LAMP MODE.................................................................................................................................................... 27
Changing Lamp Mode by Using the Projector's OSD Control Panel........................................................................... 27
GETTING INFORMATION..................................................................................................................................................... 27
Correcting Keystone by Using the Remote Control...................................................................................................... 28
PREVENTING THE UNAUTHORIZED USE OF THE PROJECTOR .............................................................................................. 29
Locking the Projector ................................................................................................................................................... 29
Unlocking the Projector................................................................................................................................................ 30
USING THE PHYSICAL LOCK .............................................................................................................................................. 30
Using the Kensington Lock........................................................................................................................................... 30
USING ON-SCREEN DISPLAY....................................................................................................................................... 31
USING THE MENUS ............................................................................................................................................................ 31
Navigating the OSD...................................................................................................................................................... 31
MENU TREE....................................................................................................................................................................... 32
INPUT MENU DESCRIPTIONS AND FUNCTIONS ................................................................................................................... 34
ADJUST MENU DESCRIPTIONS AND FUNCTIONS................................................................................................................. 35
Picture........................................................................................................................................................................... 35
Signal Adjustment ......................................................................................................................................................... 38

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r—
—
—D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
— vi —
Video Setting................................................................................................................................................................. 39
Setup.............................................................................................................................................................................. 40
Installation.................................................................................................................................................................... 45
MAINTENANCE................................................................................................................................................................ 51
CLEANING THE PROJECTOR................................................................................................................................................ 51
Cleaning the Cabinet .................................................................................................................................................... 51
Cleaning the Lens ......................................................................................................................................................... 51
Cleaning the Filters ...................................................................................................................................................... 52
Replacing the Lamps..................................................................................................................................................... 54
APPENDIX.......................................................................................................................................................................... 56
TROUBLESHOOTING........................................................................................................................................................... 56
Indicator Messages....................................................................................................................................................... 56
Common Problems and Solutions................................................................................................................................. 57
Tips for Troubleshooting............................................................................................................................................... 57
IMAGE PROBLEMS.............................................................................................................................................................. 58
Lamp Problems............................................................................................................................................................. 58
Remote Control Problems............................................................................................................................................. 59
HAVING THE PROJECTOR SERVICED .................................................................................................................................. 59
SPECIFICATIONS............................................................................................................................................................. 60
PROJECTOR SPECIFICATIONS.............................................................................................................................................. 60
Lens options.................................................................................................................................................................. 61
CABINET DIMENSIONS ....................................................................................................................................................... 61
PIN ASSIGNMENTS OF MINI D-SUB 15 PIN INPUT CONNECTOR.......................................................................................... 62
COMPATIBLE INPUT SIGNAL LIST ...................................................................................................................................... 63
RS232 CONTROL COMMANDS AND CABLE CONNECTIONS................................................................................................ 65
Control Command......................................................................................................................................................... 66
SCREEN TRIGGER............................................................................................................................................................... 70
OPERATION USING HTTP BROWSER ................................................................................................................................. 71
Overview....................................................................................................................................................................... 71
Preparation Before Use................................................................................................................................................ 71
Handling of the Address for Operation by Using a Browser........................................................................................ 71
Configuring Network Settings....................................................................................................................................... 72
Structure of the HTTP Server........................................................................................................................................ 74
REGULATORY COMPLIANCE..................................................................................................................................... 76
FCC WARNING.................................................................................................................................................................. 76
CANADA ............................................................................................................................................................................ 76
SAFETY CERTIFICATIONS................................................................................................................................................... 76
EN 55022 WARNING ......................................................................................................................................................... 76

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r
– –
–D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
–1 –
I NTRODUCTION
Packing Checklist
Carefully unpack the projector and check that the following items are included:
DLPPROJECTOR REMOTE CONTROL
POWER CORD
(FOR US MODEL) POWER CORD (FOR CHINA MODEL) POWER CORD (FOR EU MODEL) 6SEGMENT COLOR WHEEL VGA CABLE
CD-ROM
(THIS USER’S MANUAL) LENS HOLE CAP (INSTALLED)
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work.
Caution:
Avoid using the projector in dusty environments.

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r—
—
—D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
– 2 –
Views of Projector Parts
Front-right View
ITEM LABEL DESCRIPTION
1. Lamp cover Remove cover to replace lamp or color wheel
2. Lens Remove lens cap before use
3. OSD control panel See OSD Controls and Status LEDs
4. IR receiver Receiver for IR signal from remote control
5. Lens Change button Press the Lens Change button before removing the lens
6. Intake vent Lamp cooling vent – do not obstruct
7. Lens cap Cover lens to protect when not in use
8. Height adjuster Adjust level of projector
9. Intake vent Lamp cooling vent – do not obstruct
10. I/O connector panel Connect various input devices
11. IR receiver Receiver for IR signal from remote control
12. Rear intake vent Rear cooling intake – do not obstruct
13. Exhaust vent Exhaust vent – do not obstruct
14. Kensington lock Attach the projector to a permanent object with the Kensington slot
and a security cable.
15. Security chain lock Attach the projector to a permanent object using a security cable.
16. Carrying handle Pull up the handle when carrying the projector.
Important:
Grill openings on the projector allow for good air circulation, which keeps the projector lamp cool.
Do not obstruct any of the grill openings.

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r
– –
–D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
–3 –
Bottom view
18
ITEM LABEL DESCRIPTION
18. Ceiling support holes Contact your dealer for information on mounting the projector
on a ceiling
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
Caution:
With ceiling installation, use approved mounting hardware & M4 screws; maximum depth of screw: 12
mm; distance from ceiling/ wall: 20 cm (0.7 feet) for proper ventilation; distance from fluorescent lamps:
at least 1 m (3 feet) front and back of the projector. For permanent installations, follow local codes.

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r—
—
—D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
– 4 –
Top Features
OSD Controls and Status LEDs
MENU
ENTER
POWER WARNING LAMP1 LAMP2
SOURCE AUTO
CANCEL
(1)
(2)
(8)
(7)
(3)
(4)(6)
(5)
(9)
(10)
(11)
(12)
(15)
(16)
(17)
(13)
(14)
(18)
(19)
ITEM LABEL DESCRIPTION
1. ZOOM+
Increase/decrease projected image size
2. ZOOM-
3. UP CURSOR
Move image left, right, up, or down
4. RIGHT CURSOR
5. DOWN CURSOR
6. LEFT CURSOR
7. FOCUS-
Focus the projected image
8. FOCUS+
9. MENU Open / Close the OSD
10. UP/ DOWN/ LEFT/
RIGHT BUTTONS Navigate and change settings in the OSD
11. RETURN Exit the On-Screen Display (OSD)
12. AUTO Auto Sync to optimize image size, position, and resolution
13. LAMP 2 (LED)
Green / Flashing, See Indicator Messages
14. LAMP 1 (LED)
15. ENTER Select or change settings in the OSD
16. POWER Turn the projector on or off (main power switch must be turned on first).
Press to
p
lace the
p
ro
j
ector in standb
y
mode.
17. INPUT Select the input source
18. POWER (LED) Green / Orange / Flashing. See Indicator Messages
19. STATUS (LED) Green / Red / Orange / Flashing
See Indicator Messages

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r
– –
–D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
–5 –
Terminal Panel Features
ITEM LABEL DESCRIPTION
1. LAN Connect a LAN cable (not supplied) from a computer
2. SERVICE For service personnel only.
3. COMPUTER 3 IN Connect the DVI-D cable (not supplied) from a computer
4. COMPUTER 1 IN Connect a VGA cable (supplied) from a computer
5. MONITOR OUT Connect to a monitor
6. COMPUTER 2 IN
(R/Cr, G/Y, B/Cb, H, V)
Connect RGBHV or Component signal from computer or component
video enabled device
7. WIRED REMOTE Connect the remote to the projector
8. COMPONENT IN
(Y, Pb/Cb, Pr/Cr) Connect a component video enabled device
9. SERIAL PORT IN Installation control
10. VIDEO IN Connect a composite video cable (not supplied) from a video device to
the yellow RCA jack
11. S-VIDEO Connect a commercially available S-video cable from a video device
12. SCREEN TRIGGER
When connected to the screen through a commercially available cable,
the screen deploys automatically on start up of the projector. The
screen retracts when the projector is powered off (see notes below)
13. AC IN Connect the supplied power cable
14. POWER SWITCH Turn on/off the projector
Note: Screen Trigger
 When the projector is turned on, a control signal (DC 12V) outputs from this terminal.
 Screen controllers are supplied and supported by screen manufacturers.
 Do not use this jack for anything other than intended use.

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r—
—
—D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
– 6 –
Remote Control
Item Label Description
1. Status LED Lights when the remote control is used
2 ON Turn the projector on at standby mode
3 OFF Turn the projector off (standby mode)
4 ZOOM + Increase the projection image size
5 ZOOM - Reduce the projection image size
6 FOCUS+ Focus the projection image
7 FOCUS- Focus the projection image
8 TEST PATTERN Navigates and changes settings in the OSD
9 LENS SHIFT Adjust lens shift range
10 UP Move OSD cursor up
11 RIGHT Move OSD cursor right or enter submenu
12 DOWN Move OSD cursor down
13 LEFT Move OSD cursor right or enter submenu
14 ENTER Freeze/unfreezes the on-screen picture
15 MENU Display OSD main menu
16 RETURN Return to last OSD page or exit menu
17 INPUT Select the input source
18 PICTURE Display picture menu
19 NETWORK Display network setting menu
20 AUTO Auto adjustment for phase, tracking, size, position
21 ASPECT Set up aspect ratio of the projected image
22 BLANK Blank the image or press again to display the imaged.
23 OVERSCAN Enable or disable the overscan function
24 FREEZE Freeze/unfreezes the on-screen picture
25 LAMP MODE Display the Lamp Control menu
26 3D MUTE Open the 3D Mode menu
27 INFO. Display the Information menu
28 LIGHT Illuminates the buttons on the remote control for 10 sec.
29 Wire remote jack Connect to WIRED REMOTE terminal on the projector
Important:
 Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluorescent
lights can disrupt remote control operation.
 Be sure nothing obstructs the path between the remote control and the projector. If the path between
the remote control and the projector is obstructed, you can bounce the signal off certain reflective sur-
faces such as projector screens.
29

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r
– –
–D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
–7 –
Remote Control Operating Range
The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or
the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and
15 degrees above or below the projector level. If the projector does not respond to the remote control,
move a little closer.

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r—
—
—D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
–8 –
S ETUP AND O PERATION
Inserting the Remote Control Batteries
1.
Remove the battery compartment
cover by sliding the cover in the di-
rection of the arrow.
2.
Insert the supplied batteries taking
note of the polarity (+/-) as shown
here.
3.
Replace the cover.
Caution:
 Only use AA batteries.
 Dispose of used batteries according to local ordinance regulations.
 Remove the battery when not using the projector for prolonged periods.

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r
– –
–D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
–9 –
Installing or Removing the Optional Lens
Caution:
 Do not shake or place excessive pressure on the projector or the lens components as the projector and
lens components contain precision parts.
 When shipping the projector with the optional lens, remove the optional lens before shipping the projec-
tor. The lens and the lens shift mechanism may encounter damage caused by improper handling during
transportation.
 Before removing or installing the lens, be sure to turn off the projector, wait until the cooling fans stop,
and turn off the main power switch.
 Do not touch the lens surface when removing or installing the lens.
 Keep fingerprints, dust or oil off the lens surface. Do not scratch the lens surface.
 Work on a level surface with a soft cloth under it to avoid scratching.
 If you remove and store the lens, attach the lens cap to the projector to keep off dust and dirt.
Removing the Existing Lens From the Projector
1. Pull out the lens cap.
2. Push the LENS RELEASE button all the
way in and rotate the lens counterclock-
wise. The existing lens will be disengaged.
3. Pull out the existing lens slowly.
Caution:
When installing the lens into the projector, be sure to remove the lens cap from the back of the optional
lens before installing the optional lens into the projector. Failure to do so will cause damage to the projec-
tor.

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r—
—
—D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
– 10 –
Installing the New Lens
1.
Push the LENS RELEASE button and
pull in the lens following the arrow mark
on the lens slowly.
2.
Rotate the lens clockwise until it is with
two clicks

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r
– –
–D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
–11 –
Throw Distance and Screen Size
Example of DX6530 using Standard lens:
The further your projector is from the screen or wall, the larger the image. The minimum size the image
can be is approximately 40 inches (1 m) measured diagonally when the projector is roughly 74.1 inches
(1.88 m) from the wall or screen. The largest the image can be is 500 inches (12.7 m) when the projector
is about 956 inches (24.28 m) from the wall or screen.
inches m inches m inches m inches m
40 1.02 32 0.81 24.0 0.61 24.5 0.62 40.4 - 58.5 1.03 - 1.49 55.8 - 74.1 1.42 - 1.88
50 1.27 40 1.02 29.9 0.76 31.0 0.79 51.0 - 73.6 1.30 - 1.87 70.4 - 93.2 1.79 - 2.37
60 1.52 48 1.22 35.8 0.91 37.6 0.96 61.6 - 88.8 1.57 - 2.25 85.1 - 112.4 2.16 - 2.86
80 2.03 64 1.63 48.0 1.22 50.8 1.29 82.9 - 119.0 2.11 - 3.02 114.3 - 150.8 2.90 - 3.83
100 2.54 80 2.03 59.8 1.52 63.9 1.62 104.1 - 149.2 2.65 - 3.79 143.5 - 189.1 3.65 - 4.80
120 3.05 96 2.44 72.0 1.83 77.1 1.96 125.4 - 179.4 3.18 - 4.56 172.8 - 227.4 4.39 - 5.78
150 3.81 120 3.05 90.2 2.29 96.8 2.46 157.3 - 224.8 3.99 - 5.71 216.7 - 285.0 5.50 - 7.24
180 4.57 144 3.65 107.5 2.73 116.6 2.96 189.1 - 270.1 4.80 - 6.86 260.5 - 342.5 6.62 - 8.70
200 5.08 160 4.06 120.1 3.05 129.7 3.30 210.4 - 300.3 5.34 - 7.63 289.8 - 380.8 7.36 - 9.67
300 7.62 240 6.10 179.9 4.57 195.5 4.97 316.6 - 451.5 8.04 - 11.47 436.0 - 572.6 11.07 - 14.54
400 ##### 320 8.13 240.2 6.10 261.3 6.64 422.9 - 602.6 10.74 - 15.31 582.2 - 764.3 14.79 - 19.41
500 ##### 400 10.16 300.0 7.62 327.1 8.31 529.1 - 753.7 13.44 - 19.14 728.5 - 956.1 18.50 - 24.28
1.28 - 1.85 1.77 - 2.34
Distance
inches m inches m
Diagonal Width Height
0.78
Screen Size Wide Fix Wide Zoom Standard Lens

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r—
—
—D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
– 12 –
inches m inches m inches m
40 1.02 32 0.81 24 0.61 71.9 - 121.3 1.83 - 3.08 115.9 - 176.8 2.94 - 4.49
50 1.27 40 1.02 30 0.76 90.7 - 152.4 2.30 - 3.87 146.2 - 222.3 3.71 - 5.65
60 1.52 48 1.22 36 0.91 109.5 - 183.5 2.78 - 4.66 176.5 - 267.9 4.48 - 6.80
80 2.03 64 1.63 48 1.22 147.0 - 245.7 3.73 - 6.24 237.1 - 358.9 6.02 - 9.12
100 2.54 80 2.03 60 1.52 184.6 - 307.9 4.69 - 7.82 297.7 - 450.0 7.56 - 11.43
120 3.05 96 2.44 72 1.83 222.1 - 370.1 5.64 - 9.40 358.2 - 541.0 9.10 - 13.74
150 3.81 120 3.05 90 2.29 278.4 - 463.4 7.07 - 11.77 449.1 - 677.6 11.41 - 17.21
180 4.57 144 3.65 107 2.73 334.8 - 556.7 8.50 - 14.14 540.0 - 814.2 13.72 20.68
200 5.08 160 4.06 120 3.05 372.3 - 618.9 9.46 - 15.72 600.6 - 905.3 15.26 - 22.99
300 7.62 240 6.1 180 4.57 560.0 - 930.0 14.23 - 23.62 903.6 - ##### 22.95 - 34.56
400 10.16 320 8.13 240 6.1 747.8 - 1241.0 18.99 - 31.52 1206.6 - ##### 30.65 - 46.12
500 12.7 400 10.16 300 7.62 935.5 - 1552.0 23.76 - 39.42 1509.5 - ##### 38.34 - 57.69
Screen Size Semi-Long Zoom Long Zoom 1
Diagonal Width Height
2.28 - 3.82 3.67- 5.58
inches m inches m
Distance
inches m inches m inches m
40 1.02 32 0.81 24 0.61 169.6 - 271.2 4.31 - 6.89
50 1.27 40 1.02 30 0.76 215.0 - 341.9 5.46 - 8.68
60 1.52 48 1.22 36 0.91 260.3 - 412.6 6.61 - 10.48
80 2.03 64 1.63 48 1.22 350.9 - 554.0 8.91 - 14.07
100 2.54 80 2.03 60 1.52 441.6 - 695.3 11.22 - 17.66
120 3.05 96 2.44 72 1.83 532.2 - 836.7 13.52 - 21.25
150 3.81 120 3.05 90 2.29 668.2 - 1048.8 16.97 - 26.64
180 4.57 144 3.65 107 2.73 804.1 - 1260.9 20.42 - 32.03
200 5.08 160 4.06 120 3.05 894.8 - 1402.2 22.73 - 35.62
300 7.62 240 6.1 180 4.57 1348.0 - 2109.1 34.24 - 53.57
400 10.16 320 8.13 240 6.1 1801.2 - 2816.0 45.75 - 71.53
500 12.7 400 10.16 300 7.62 2254.3 - 3522.9 57.26 - 89.48
Diagonal Width Height
Long Zoom 2
5.42 - 8.59
Screen Size
inches m
Distance
Caution:
 Ceiling installation must be done by a qualified professional. Contact your dealer for more information. It
is not recommended you install the projector yourself.
 Only use the projector on a solid, level surface. Serious injury and damage can occur if the projector is
dropped.
 Do not use the projector in an environment where extreme temperature occurs. The projector must be
used at temperatures between 41 degrees Fahrenheit (5 degrees Celsius) and 104 degrees Fahrenheit (40
degrees Celsius).
 Screen damage will occur if the projector is exposed to moisture, dust or smoke.
 Do not cover the vents on the projector. Proper ventilation is required to dissipate heat. Damage to the
projector will occur if the vents are covered.

D
D
DL
L
LP
P
P
P P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r
– –
–D
D
DX
X
X6
6
65
5
53
3
30
0
0/
/
/D
D
DX
X
X6
6
65
5
53
3
35
5
5/
/
/D
D
DW
W
W6
6
60
0
03
3
30
0
0/
/
/D
D
DW
W
W6
6
60
0
03
3
35
5
5
U U
Us
s
se
e
er
r
r’
’
’s
s
s
M M
Ma
a
an
n
nu
u
ua
a
al
l
l
–13 –
Installing the Optional Color Wheel
The projector comes with a four-segment color wheel installed. An additional six-segment color wheel is
optional. To replace the color wheel (located under the lamp cover adjacent to lamp 1) refer to the follow-
ing guide.
Note:
Wait until the lamp house and the color wheel cool off.
1. Remove the four screws (A) on the
lamp cover.
A
B
2. Lift the lamp cover in the direction of
the arrow (B).
3. Unscrew the retaining screws (x 4) on
the four-segment color wheel.
4. Lift the color wheel in the direction
shown.