Vivo MOUNT-KB07B User manual
Silver Under Desk Keyboard Tray
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-kb07b
SKU: MOUNT-KB07B
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
ASSEMBLY STEPS
STEP 1
Make sure you have atleast 16” (407mm) of clearance from the front edge of your desktop. Loosen
Clamp (C) using 5mm Allen Wrench (T-A).
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
A (x1)
Keyboard Tray
B(x1)
Arm
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
C(x1)
Clamp
S-A (x2)
M5x6mm Screw
S-B (x4)
M5x12mm Screw
S-C (x5)
ST5x12mm Screw
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Ruler
T-A (x1)
5mm Allen Wrench
DESK
31 32 33 34 35 36 37 38 39
40
41 42 43 44 45
46
47 48 49 50
30
cm
DESKTOP
C
T-A
Drill
D(x1)
Wrist Pad
E(x3)
Non-Slip Pad
3
STEP 2
Assemble Arm (B) to Clamp (C) using M5x6mm
Screws (S-A) and a Phillips screwdriver
To adjust the tray assembly, loosen the knob on the side of Arm (B) and adjust the height and tilt angle
as desired, then tighten the knob to lock it into your desired position. Lower the tray below the desktop
to store it underneath.
STEP 6
Slide the mouse pad out from under Keyboard Tray (A). Remove adhesive backing from Wrist Pad (D)
and Non-Slip Pads (E) and place them on Keyboard Tray (A).
STEP 7
STEP 3
Using a 11/64” (4.3mm) drill bit, drill pilot holes
through Arm (B) into the desktop. Mount Arm (B) in
place using ST5x12mm Screws (S-C) and a Phillips
screwdriver
Secure Clamp (C) to the desktop using 5mm
Allen Wrench (T-A).
DESKTOP
STEP 4
B
S-C
T-A
C
B
C
S-A
Assemble Keyboard Tray (A) to Arm (B)
using M5x12mm Screws (S-B) and a Phillips
Screwdriver.
STEP 5
A
B
S-B
DESKTOP
DESKTOP
E
E
LAST UPDATED: 03/25/2022
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
