Vivo MOUNT KB05D User manual

Tool Required
phillips screwdriver
Package Content
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
- -http//vivo u.com/product/mount kb05d
F (x1)
mm Allen Key
A (x2)
Clamp Bracket
D (x4)
M4 Screw
E (x8)
M Screw
B (x2)
Keyboard Rail
C (x1)
Keyboard Tray
Step 1
Mount the keyboard rails
(B) to the bottom of the
keyboard tray (C) using M
screws (E). NOTE: Make
sure long ends of rails are
facing towards the long
end of the keyboard tray.
eyboard Tray
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model MOUNT B05D

Step 2
Step 3
Step 4
Mount clamp brackets (A) to
keyboard rails (B) using M4
screws (D) at one of the four
height positions.
Clamp the
assembled
keyboard mount to
the desktop.
Adjust support pads on the back of the
mount, and secure adjusted height by
tightening the nut on each support pad
screw using mm Allen Key (F).
If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safety Warning
Contact u at
Last updated: 0 /16/2018
NOTE: To ensure
keyboard tray (C)
is level, do not
over-tighten clamps.