Vivo STAND-V001M User manual

Single Monitor Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v001m
SKU: STAND-V001M
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Arm
B(x1)
Pole
F(x1)
Pole Cap
T-B (x1)
5mm Allen
Wrench
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
C(x1)
Clamp
H(x1)
Cable Clip
D (x1)
Grommet
Plate
G(x5)
Rubber Pad
S-A (x3)
M6x16mm Screw
E (x1)
Support Plate
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
T-C (x1)
6mm Allen
Wrench
M-A (x4)
M4x12mm Screw
M-B (x4)
M5x12mm Screw
M-C (x4)
M5 Washer
T-A (x1)
4mm Allen
Wrench

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
22lbs
(10kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
Insert Pole Cap (F) into Pole (B).
STEP 2 (Option A)
Clamp Installation
Assemble Pole (B) to Clamp (C) using M6x16mm Screws (S-A) and 4mm Allen Wrench (T-A). Remove
adhesive backing from Rubber Pads (G) and stick them to the underside of Clamp (C). Attach the clamp
assembly to the desktop.
F
B
B
C
S-A
T-A
G

4
STEP 2 (Option B)
STEP 3
Slide Cable Clip (H) and Arm (A) onto Pole (B). Tighten Arm (A) using 5mm Allen Wrench (T-B).
Grommet Base Installation
Remove screws from the back of Clamp (C) using 4mm Allen Wrench (T-A). Using a Phillips
screwdriver, remove the screw from Clamp Bolt (C2) and separate Clamp Bolt (C2)
from Clamp (C). Remove adhesive backing from Rubber Pads (G) and stick them to the
underside of Grommet Plate (D). If desk does not have an existing grommet
hole, drill a 3/8” (10mm) diameter hole at the desired position through the
mounting surface. Assemble Pole (B) to Grommet Plate (D) using Clamp Bolt (C2) and
Support Plate (E).
C
T-A
C2
G
D
B
E
H
A
B
T-B
C2

5
STEP 4
Attach two Screws (M-A or M-B) and M5 Washers (M-C) to top mounting holes of your
monitor, making sure to leave 3mm of threads exposed. Insert Screws (M-A, M-B) into
the top slots in the VESA plate on Arm (A). Secure using two more Screws (M-A or M-B)
and M5 Washers (M-C) in the bottom two holes and tighten using a Phillips
screwdriver. Adjust the tilt of the monitor using 6mm Allen Wrench (T-C).
M-A
M-B
M-C
A
T-C

6
STEP 5
Adjust the tension in Arm (A) using 5mm Allen Wrench (T-B) as shown below.
A
T-B

7
STEP 6
Store 5mm Allen Wrench (T-B) and 6mm Allen Wrench (T-C) in Cable Clip (H) for future adjustment.
STEP 7
T-B
T-C
H
Manage cables using the cable management clips on Arm (A) and Cable Clip (H). Adjust the monitor
as desired.
A
H

LAST UPDATED: 01/27/2022
REV4
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303