Vivo MOUNT-VW02 User manual

TV and Computer Wall Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-vw02
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: MOUNT-VW02

2 3
PACKAGE CONTENTS
TOOLS NEEDED
110lbs
(49.90
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
B(x1)
Bracket
C(x2)
Allen Wrench
W-A (x4)
Screw
M-A (x4)
M5x14
M-B (x4)
M6x14
M-C (x4)
M6x30
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
W-C (x4)
Washer
W-B (x4)
Anchor
Drill
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [email protected], or call us at 1-800-371-5654.
A (x1)
Mount
M-D (x4)
M8x30
M-E (x4)
M8x50
M-F (x4)
Plate
M-G (x8)
Small
Spacer
M-H (x8)
Large
Spacer
ASSEMBLY STEPS
STEP 1
OPTION A: Wood Wall
Hold mount (A) up to mounting surface and mark drill holes with a pencil. Drill 2.2” (55mm) deep holes
using a 3/16” (4.5mm) drill bit. Attach mount (A) with screws (W-A) and washers (W-C).
OPTION B: Concrete/Brick Wall
Hold mount (A) up to mounting surface and mark drill holes with a pencil. Drill 2.4” (60mm) deep holes
using a 3/8” (10mm) drill bit. Insert anchors (W-B). Attach mount (A) with screws (W-A) and washers
(W-C).

4 5
STEP 2
OPTION A: Flat Back TV
Attach bracket (B) to TV with screws (M-A or M-B) and plates (M-F).
STEP 4
STEP 3
Li TV onto mount (A).
Tighten screws on brackets (B) to secure TV to mount (A).
OPTION B: Curved Back TV
Attach bracket (B) to TV with screws (M-C, M-D, or M-E), plates (M-F), and spacers (M-G or M-H).

6 7
STEP 5
Manage wires.
STEP 6
Adjust tilt joint using Allen wrench (C). Adjust TV as desired.

Last Updated: 10/01/2018
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654