VM Audio EXS652M User manual

EXS652M
ELUX MARINE FULL RANGE SPEAKERS
CONSUMER LIMITED WARRANTY AGREEMENT
Your product is covered by a limited warranty by VM Audio as established below:
Mobile Electronics Limited Warranty
Products purchased from an Authorized VM Audio Dealer are warrantied
to be free of defects in material and workmanship for one (1) year from the
date of original purchase under normal usage. Products that are identied as
“refurbished” have a limited warranty of ninety (90) days from the date of original
purchase. Dated proof of purchase (original receipt or invoice) will be required
for all warranty claims. In the unlikely event that you experience a manufacturing
defect or malfunction during the warranty period, VM Audio will repair the
defective product or replace with the same or equivalent product if the same
item is not available or discontinued. Replacement product may have supercial
blemishes or scratches that do not affect the performance of the product. This
warranty is only intended and valid for the original purchaser and cannot be
extended to subsequent owners. Any applicable implied warranties are limited to
the period of the expressed warranty starting from the original purchase date.
No warranties, expressed or implied, will be accepted after the previously listed
periods. Exclusions may apply; please check your local state laws.
Instructions for Claiming Warranty Service
If you should require warranty service, please return the product to the
authorized VM Audio Dealer you originally purchased the item from for
experienced and speedy warranty service. Contact VM Audio directly to nd the
authorized dealers nearest you.
In case the defective merchandise needs to be returned to VM Audio, please
contact us and a Return Merchandise Authorization (RMA) number will be
assigned to you. It is important to pack all defective items in the original packaging
to prevent damages from shipping, and be sure to write the RMA number clearly
on the outside of the box for faster processing. Do not include non-defective
items as it is not necessary and will increase your shipping costs.
Include a copy of the original receipt or invoice with the purchase date, dealer’s
name and customer’s name and invoice number clearly visible. Manufacturing
date may be used if no proof of purchase is provided. The customer will pay to
ship the defective product; COD will not be accepted.
Please follow the above instructions carefully to prevent voiding your warranty.
Your Warranty Service Does Not Cover the Following:
-Products not purchased from an Authorized VM Audio Dealer
-Damages from poor installation by not following the included instruction manual.
-Damages due to excessive moisture, heat and other elements from improper
care.
-Evidence of tampering or repair by non-authorized personnel.
-Products not issued an RMA number.
-Damage during freight from poor packaging or handling.
-Return shipping on non-defective items.
Warranty Turnaround Time
It is VM Audio’s goal to turnaround the merchandise in a timely fashion of one
(1) week. Unexpected delays may occur due to repair parts or replacement
shortage.
International Warranty
Please check with your Authorized International VM Audio Dealer or distributor
for specic warranty policies and processes for your country.
Customer Care Contact Info:
Email: [email protected]
Phone: [phone]
Web Site: www.vmaudio.com

• 2-Way Coaxial Dynamic Driver Design
• Propulsion Drive Flux-Cycle Motor System
• Wide-Angle Sound Dispersion Diaphragm
• Image Enhancing Wave Array Grill
• Complete Marine Weather Protection Components
• Corrosion Free One-Piece ABS Full Frame Basket
• Element Protection Treated PP Injection Cone
• UV/Salt Water Repellent Suspension System
• NBR Treated Rubber Surround
• Treated Linear Nomex Damper
• High-Strength Kapton Former with KSV Voice Coil
• Direct 13mm High Frequency PEI Driver
• Balance-Dome Tweeter with Neodymium Magnet
Congratulations on your purchase of an Elux Series product from VM Audio.
You have seen that with years of acquired taste for quality, the Elux Series has
the right design and performance to satisfy your utmost demand. With music
so clear and rich and bass so low and loud, you will be immersed in a world of
musical euphoria that anything else will seem like white noise. By following the
installation instructions carefully, you will ensure yourself performance that will
be enjoyed from each use for years to come. Reward yourself with the ner
things in life.
INTRODUCTION
• Coaxial Speaker System (2 pieces)
• Woofer Grilles (2 pieces - attached to speaker)
• Phillips-Head Stainless Steel Screws (4 pieces)
• Stainless Steel Washers (4 pieces)
• Mounting Template
INSIDE PACKAGE
FEATURES
Woofer
Tweeter
Power (RMS)
Power (Peak)
Frequency Response
Sensitivity
Nominal Impedance
(A) Trim Ring Diameter
(B) Trim Ring Height
(C) Mounting Diameter
(D) Mounting Depth
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
6.5 in. (165mm)
1/2 in. (13mm)
125 Watts
250 Watts
60Hz - 20kHz
90
4 ohms
7.68 in. (195mm)
1.10 in. (28mm)
5.59 in. (142mm)
2.52 in. (64mm)
SPECIFICATIONS
• Always disconnect the main power source or battery system before any
electrical installation is performed.
• Before drilling and inserting any screws or making any type of cutouts; ensure
there is enough clearance behind the speaker panel. Be aware of gas tanks,
fuel or hydraulic lines and electrical wires that may be located behind the
panel you will be working on, and make sure to not cut or drill through these
obstacles.
• If existing speaker wires are being replaced or new ones are being installed,
run all wires rst before mounting the speakers.
• Avoid running wires through sharp corners and edges. Always use rubber
grommets to prevent wires from exposing and causing an electrical short
circuit.
• Be certain that the speakers are mounted rmly and secure on the panel. If
they are not rmly secured, the speakers can become a dangerous projectile
in a collision and cause severe injury.
• Although these speakers are designed to withstand the harsh marine
environment, they are not waterproof and should not be submerged under
water.
• Failure to connect the speakers as shown will result in damage to the
speakers which will not be covered under warranty.
INSTALLATION CONSIDERATIONS
INSTALLATION PROCEDURES
1. Determine the mounting
location for the speaker and
mark the cutout circle and
screw holes using the template
provided.
2. Carefully make the cutout
circle using the appropriate
tool for the panel material.
3. Drill the screw holes with
an electric drill using 1/8” bit.
4. Pull the speaker wires
through the cutout circle and
connect them to the terminals.
The positive terminal is marked
with a “+” and negative with “-”.
5. Mount the speaker into the
cutout circle and secure the
speaker using four screws,
each one around every other
slot on the speaker frame.
+
(A)
(B)
(C)
(D)