Vogue 340630 Wiring diagram

VOGUE 15 Place Integrated Dishwasher Stainless Steel
To prevent the risk of accidents or damage to the appliance, it is essential
to read these instructions before it is installed and used for the first time
340630
INSTALLATION
INSTRUCTIONS
USER GUIDE

CONTENTS
ERROR CODES
NOTE:
If you cannot solve the problems by yourself, please ask for help from a
professional technician.
The manufacturer, following a policy of constant development and updating of
the product, may make modifications without giving prior notice.
If lost or out-of-date, you can receive a new user manual from the manufacturer
or responsible vendor.
PROGRAMMING THE DISHWASHER
Wash Cycle Table
Starting A Cycle Wash
Changing The Program Mid-cycle
Forget To Add A Dish?
USING YOUR DISHWASHER
Control Panel
Preparing And Loading Dishes
Function Of The Rinse Aid And Detergent
Filling The Rinse Aid Reservoir
Filling The Detergent Dispenser
4
4
12
7
13
13
14
14
15
TECHNICAL INFORMATION
17
16
11
10

5
QUICK USER GUIDE
Please read the corresponding content on the instruction manual for detailed
operating method.
2Removing the larger residue on the
cutlery
3Loading the baskets
4Filling the dispenser Selecting a program and running
the dishwasher
Inside Outside
3
1Install the dishwasher
(Please check the section 5 “INSTALLATION INSTRUCTION ”
of PART Ⅰ: Generic Version.)

4
USING YOUR DISHWASHER
Control Panel
1 2 3 6 4 5
Operation (Button)
Power
Delay
Alt
Press this button to turn on your dishwasher, the screen lights up.
Press this button to set the delayed hours for washing. You can
delay the start of washing up to 24 hours. One press on this
button delays the start of washing by one hour.
1
3
5
Program
2
Function
4
Press the button to select either upper basket or lower basket
loaded, and the response indicators ( ) will be lit.
Press this button to select the appropriate washing program, the
selected program indicator will be lit
Press the button to select a function, corresponding indicator will
be lit.
8
97 10 11

To show the reminding time, delay time, error code etc.
5
8
Water Faucet
If the “ ” indicator is lit, it means the water faucet closed.
6
7
Auto
Auto sensing wash, lightly, or heavily soiled crockery,
with or with out dried-on food
To rinse dishes that you plan to wash later that day.
Soak
Display
Program
indicator
Intensive
For heaviest soiled crockery, such as pots, pans, casserole
dishes and dishes that have been sitting with dried food
on them for a while.
Glass
For lightly soiled crockery and glass.
Rapid
A shorter wash for lightly soiled loads that do not
need drying.
90 Min
For lightly soiled plates and pans that need quick wash.
Heavy
For heavily soiled loads, such as pots, plates, glasses
and lightly soiled pans.
ECO
For normally soiled loads, such as pots, plates, glasses
and lightly soiled pans, standard daily cycle.
Rinse Aid
If the “ ” indicator is lit, it means the dishwasher is low
on dishwasher rinse aid and requires a refill.
Warning
indicator
screen
Progress
indicator
9Program ending
When the program is end, the indicator will be lit.

Display
Function
indicator
10
Power wash
To wash very dirty, hard to clean dishes. (It can only be
used with Auto, Intensive, Heavy, ECO, Glass, 90min.)
Extra drying
Express
Reduce the program time.
Energy save
Upper
When you select Upper, only the upper rack nozzle is
activated. The lower nozzle will not operate.
Lower
When you select Lower, only the lower rack nozzle is
activated. The upper nozzle will not operate.
To dry dishes more completely. (It can only be used with
Auto, Intensive, Heavy, ECO, Glass, 90min.)
When you have less plates to wash ,you can choose it.
(It can only be used with Auto, Intensive, Heavy, ECO,
Glass, 90min.)
6
Alt
indicator
11

Preparing And Loading Dishes
Consider buying utensils which are identified as dishwasher-proof.
For particular items, select a program with the lowest possible temperature.
To prevent damage, do not take glass and cutlery out of the dishwasher
immediately after the program has ended.
Cutlery with wooden, horn china or mother-of-pearl handles
Plastic items that are not heat resistant
Older cutlery with glued parts that are not temperature resistant
Bonded cutlery items or dishes
Pewter or cooper items
Crystal glass
Steel items subject to rusting
Wooden platters
Items made from synthetic fibres
Some types of glasses can become dull after a large number of washes
Silver and aluminum parts have a tendency to discolour during washing
Glazed patterns may fade if machine washed frequently
For washing the following cutlery/dishes
Are not suitable
Are of limited suitability
Recommendations for loading the dishwasher
Scrape off any large amounts of leftover food. Soften remnants of burnt food in
pans. It is not necessary to rinse the dishes under running water.
For best performance of the dishwasher, follow these loading guidelines.
(Features and appearance of baskets and cutlery baskets may vary from
your model.)
Place objects in the dishwasher in following way:
Items such as cups, glasses, pots/pans, etc. are faced downwards.
Curved items, or ones with recesses, should be loaded aslant so that water can run
off.
All utensils are stacked securely and can not tip over.
All utensils are placed in the way that the spray arms can rotate freely during
washing.
7

Load hollow items such as cups, glasses, pans etc. With the opening facing
downwards so that water cannot collect in the container or a deep base.
Dishes and items of cutlery must not lie inside one another, or cover each other.
To avoid damage, glasses should not touch one another.
The upper basket is designed to hold more delicate and lighter dishware such as
glasses, coffee and tea cups.
Long bladed knives stored in an upright position are a potential hazard!
Long and / or sharp items of cutlery such as carving knives must be positioned
horizontally in the upper basket.
Please do not overload your dishwasher. This is important for good results and for
reasonable consumption of energy.
NOTE:
Very small items should not be washed in the dishwasher as they could easily fall
out of the basket.
To prevent water dripping from the upper basket into the lower basket, we
recommend that you empty the lower basket first, followed by the upper basket.
Removing the dishes
WARNING
Items will be hot! To prevent damage, do not take glass and
cutlery out of the dishwasher for around 15 minutes after the
program has ended.
8
Recommendations for loading the dishwasher

Loading the upper basket
The upper basket is designed to hold more delicate and
lighter dishware such as glasses, coffee and tea cups
and saucers, as well as plates, small bowls and shallow
pans (as long as they are not too dirty). Position the
dishes and cookware so that they will not get moved by
the spray of water.
WARNING
Do not let any item extend through
the bottom.
Always load sharp utensils with the
sharp point down!
Loading the cutlery basket
Cutlery should be placed in the cutlery rack separately from each other in the
appropriate positions, and do make sure the utensils do not nest together, this may
cause bad performance.
9
For the best washing effect, please load the baskets refer to standard
loading options on last section of PART Ⅰ: Generic Version
Loading the lower basket
We suggest that you place large items and the most
difficult to clean items are to be placed into the lower
basket: such as pots, pans, lids, serving dishes and bowls,
as shown in the figure below. It is preferable to place
serving dishes and lids on the side of the racks in order to
avoid blocking the rotation of the top spray arm.
The maximum diameter advised for plates in front of the
detergent dispenser is of 19 cm, this not to hamper the
opening of it.

The rinse aid is released during the final rinse to prevent water from forming droplets
on your dishes, which can leave spots and streaks. It also improves drying by allowing
water to roll off the dishes. Your dishwasher is designed to use liquid rinse aids.
When to refill the rinse aid dispenser
WARNING
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser
with any other substances (e.g. Dishwasher cleaning agent, liquid detergent).
This would damage the appliance.
Unless the rinse-aid warning light ( ) on the control panel is on, you can always
estimate the amount from the color of the optical level indicator located next to the
cap. When the rinse-aid container is full, the indicator will be fully dark. The size of the
dark dot decreases as the rinse-aid diminishes. You should never let the rinse aid level
be less than 1/4 full.
As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator
changes, as illustrated below.
Full 3/4 full 1/2 full 1/4 full Empty
Function Of The Rinse Aid And Detergent
Function of detergent
The chemical ingredients that compose the detergent are necessary to remove, crush and
dispense all dirt out of the dishwasher. Most of the commercial quality detergents are
suitable for this purpose.
WARNING
Proper Use of Detergent
Use only detergent specifically made for dishwashers use. Keep your detergent
fresh and dry.
Don't put powdered detergent into the dispenser until you are ready to wash
dishes.
Dishwasher detergent is corrosive! Keep dishwasher
detergent out of the reach of children.
10

11
1 2
Remove the rinse aid reservoir cap
by rotating it counterclockwise.
Pour the rinse aid into the dispenser,
being careful not to overfill.
3Close the rinse aid reservoir cap by
rotating it clockwise.
NOTE:
Clean up any spilled rinse aid with
an absorbent cloth to avoid
excessive foaming during the next
wash.
Adjust lever(Rinse)
MAX
6
1
5
2
4
3
Adjusting the rinse aid reservoir
The rinse aid reservoir has six settings. Both the
recommended setting and the factory setting is “3”. If the
dishes are not drying properly or are spotted, adjust the
dial to the next higher number until your dishes are spot-
free.
Reduce it if there are sticky whitish stains on your dishes or
a bluish film on glassware or knife blades.
Rinse-Aid indicator
Filling The Rinse Aid Reservoir

12
2
1Open the detergent dispenser flap
by pushing the detergent dispenser
release catch.
Add detergent into the larger cavity
(A) for the main wash cycle .
For better cleaning result, especially if
you have very dirt items, pour a small
amount of detergent onto the door.
The additional detergent will activate
during the pre-wash phase.
3Close the flap by sliding it to the left
and then pressing it down.
A
B
Filling The Detergent Dispenser
NOTE:
Be aware that depending on the soiling of water, setting may be different.
Please observe the manufacturer's recommendations on the detergent packaging.

13
(1 piece)
5/28.75g
PROGRAMMING THE DISHWASHER
Wash Cycle Table
The table below shows which programs are best for the levels of food residue
on them and how much detergent is needed. It also show various information about
the programs.
( )Means: need to fill rinse into the Rinse-Aid Dispenser.
Program Running
Time(min)
Energy
(Kwh)
Water
(L)
Description
Of Cycle
Rinse
Aid
Detergent
Pre/Main
90 1.15 13
Wash(65℃)
Rinse
Rinse(65℃)
Drying
175
185
130
195
1.5
1.1
0.75
0.641
19
15
15
11.8
Pre-wash(50℃)
Wash(60℃)
Rinse
Rinse
Rinse(70℃)
Drying
Pre-wash(45℃)
Wash(55℃)
Rinse
Rinse(65℃)
Drying
Pre-wash
Wash(45℃)
Rinse(45℃)
Drying
Pre-wash
Wash(40℃)
Rinse
Rinse(60℃)
Drying
150 0.9 -1.3 11-15
Pre-wash(45
Autowash
(45-55
Rinse
Rinse(65
Drying.
℃)
℃)
℃)
Auto
90 Min
Normal
( )*AS/NZS 2007.1
Intensive
Glass
(1 piece)
33.75g
(1 piece)
5/28.75g
(1 piece)
5/28.75g
(1 piece)
5/28.75g
(1 piece)
5/28.75g

14
Wash(45℃)
Rinse(55℃)
Rinse(55℃)
30 0.7 12.5
20g
Program Running
Time(min)
Energy
(Kwh)
Water
(L)
Description
Of Cycle
Rinse
Aid
Detergent
Pre/Main
Prewash
15 0.02 4.5
Soak
Rapid
AS/NZS 2007.1:
test in accordance with AS/NZS 2007.1.
This program is the test cycle. The information for comparability
NOTE:
Starting A Cycle Wash
1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page ”Product fiche”.
Make sure that the water supply is turned on to full pressure.
4. Open the door, touch the Power button.
5. Choose a program, the response light will turn on. Then close the door, the
dishwasher will start its cycle.
Changing The Program Mid-cycle
A wash cycle can only be changed if it has been running for a short time otherwise,
the detergent may have already been released and the dishwasher may have already
drained the wash water. If this is the case, the dishwasher needs to be reset and the
detergent dispenser must be refilled. To reset the dishwasher, follow the
instructions below:

15
3 sec
1. Open the door a little to stop the dishwasher, after the spray arm stop working,
you can open the door completely.
2. Press Program button more than three seconds the machine will be in stand by
state.
3. You can change the program to the desired cycle setting.
Forget To Add A Dish?
A forgotten dish can be added any time before the detergent dispenser opens. If
this is the case, follow the instructions below:
1.
2.
3. Add the forgotten dishes.
4. Close the door.
5.
Open the door a little to stop the washing.
After the spray arms stop working, you can open the door completely.
The dishwasher will run after 10 seconds.
WARNING
It is dangerous to open the door
mid-cycle, as hot steam may
scald you.

E8
Open circuit or break of distributary valve.
Failure of orientation
of distributary valve.
ERROR CODES
If there is a malfunction, the dishwasher will display error codes to identify these:
Codes Meanings Possible Causes
Longer inlet time.
Not reaching required
temperature.
Overflow.
Malfunction of heating element.
Some element of dishwasher leaks.
E1
E3
E4
Faucets is not opened, or water intake is
restricted, or water pressure is too low.
WARNING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, the water
should be removed before restarting the dishwasher.
16
E9
Water or something on the button.
Keep pressing a button
more than 30 seconds.
Ec
PCB or motor fail.
Washing control system
fail.

TECHNICAL INFORMATION
Height (H)
Width (W)
Depth (D1)
Depth (D2)
815mm
598mm
550mm (with the door closed)
1150mm (with the door opened 90°)
W
D1
H
17
D2

Product fiche
Product fiche
Manufacturer
Type / Description
Standard place settings
Energy efficiency class
Energy consumption of the standard cleaning cycle
Water consumption of the standard cleaning cycle
Program duration of the standard cleaning cycle
Noise level
Mounting
Power consumption
Water pressure (flow pressure)
Could be built-in
Vogue
340630
15
0.641 kWh
11.8 liter
195 min
47 dB(A) re 1 pW
built-in
0.04-1.0MPa=0.4-10 bar
YES
Water consumption class
Standard cleaning cycle ECO
4
5
Rated voltage / frequency AC 220-240V/50Hz
18
1760-2100W(BLDC)