EN
Telephone Helpline: 1300225960
Safety Instructions
Whilst all care has been taken to remove sharp edges, care must be taken when cleaning or handling the
sink to prevent risk of injury from exposed metal edges.
Do not overload the sink top or shelf causing it to bend.
Product Description
• HC900 - Vogue Single Bowl Sink R/H Drainer -1000mm (90mm
Drain)
• HC901 - Vogue Single Bowl Sink L/H Drainer - 1000mm (90mm
Drain)
• HC902 - Vogue Single Bowl Sink L/H Drainer - 1200mm (90mm
Drain)
• HC903 - Vogue Single Bowl Sink R/H Drainer - 1200mm (90mm
Drain)
• HC904 - Vogue Double Bowl Sink R/H Drainer - 1500mm (90mm
Drain)
• HC905 - Vogue Double Bowl Sink L/H Drainer - 1500mm (90mm
Drain)
• HC906 - Vogue Single Bowl Sink Double Drainer - 1500mm (90mm
Drain)
• HC907 - Vogue Double Bowl Sink R/H Drainer - 1800mm (90mm
Drain)
• HC908 - Vogue Double Bowl Sink L/H Drainer - 1800mm (90mm
Drain)
• HC909 - Vogue Double Bowl Sink Double Drainer - 2400mm
(90mm Drain)
• HC912 - Vogue Single Bowl Sink R/H Drainer - 1000mm x
700mm (90mm Drain)
• HC913 - Vogue Single Bowl Sink L/H Drainer - 1000mm x
700mm (90mm Drain)
• HC914 - Vogue Single Bowl Sink L/H Drainer - 1200mm x
700mm (90mm Drain)
• HC915 - Vogue Single Bowl Sink R/H Drainer - 1200mm x
700mm (90mm Drain)
• HC916 - Vogue Double Bowl Sink R/H Drainer - 1500mm x
700mm (90mm Drain)
• HC917 - Vogue Double Bowl Sink L/H Drainer - 1500mm x
700mm (90mm Drain)
• HC918 - Vogue Single Bowl Sink Double Drainer - 1500mm x
700mm (90mm Drain)
• HC919 - Vogue Double Bowl Sink R/H Drainer - 1800mm x
700mm (90mm Drain)
• HC920 - Vogue Double Bowl Sink L/H Drainer - 1800mm x
700mm (90mm Drain)
• HC921 - Vogue Double Bowl Sink Double Drainer - 2400mm x
700mm (90mm Drain)
Assembly
Note: Be sure to check all packaging materials for any small parts that may have
come loose during transportation.
1. Remove all protective film from the shelf, legs and underneath the sink, taking care to avoid
scratching the surfaces.
2. Place the sink face down on the floor [A].
3. Insert the legs into the sockets situated at each corner of the sink [B & C].
Note: Do not secure the legs to the sink at this stage. This makes inserting the
shelf easier.
4. Position the corner sockets of the shelf over the four legs and lower the shelf approximately 25cm
down the legs [D].
Note: The legs are marked at 25cm to help position the shelf in a level position.
5. Hold the shelf in position and insert the grub screws to loosely secure the shelf to each leg [E] and
the legs to the sink top.
Note: Leaving the grub screws loose allows for adjustments to sink shelf and legs.
6. Adjust the shelf and legs so that they are level (use a spirit level if required).
7. Tighten all the grub screws [F].
8. Stand the sink upright and remove the remaining protective film [G].
9. If necessary adjust the feet to level the sink.
HC900-HC909_HC912-HC921_A5_v5_20220224.indb 3HC900-HC909_HC912-HC921_A5_v5_20220224.indb 3 2022/2/24 16:172022/2/24 16:17
