volkano Piston Series User manual

INSTRUCTION MANUAL
Please read and retain these instructions for future reference.
VK-3039-BK
Piston Serie s
BLUETOOTH CAR MODULATOR
QUICK CHARGE QC3.0

2
HIGHLIGHTS
• Metal Housing
• Quick Charge QC 3.0
• LED Display
• USB Media Input
• 2 x USB Charging Ports
• Bluetooth Audio Receiver
• Hands-Free Calling
• USB Charging Output:
Port 1: QC 3.0: 5 V DC, 3.0 A /
9 V DC, 2.0 A / 12 V DC, 1.5 A
Port 2: 5 V DC, 0.5 A
• Bluetooth:
Version: 4.2
Chipset: JL
Profiles: A2DP, AVRCP, HFP
Range: 10m
• Max. Size for USB Drive: 32 GB
• Charge Input: 12 - 24 V DC
• Supported Formats: MP3
• Volkano Piston Series Metal Bluetooth Car Modulator
• Instruction Manual
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS

3
DESCRIPTION OF PARTS
2
3
1
1. Previous Song / Volume Down / Radio Channel Down Button
2. Answer / End Call / Play / Pause Button
3. Next Song / Volume Up / Radio Channel Up Button
4. Cigarette Lighter Plug
5. USB Charging Port 2 / USB Media Inut
6. LED Screen
7. Micrphone
8. USB Charging Port 1 / QC Charging Port
4
6
5
7
8

4
SETUP
Plug the Piston Modulator into your vehicle’s cigarette lighter or
power port. Tune your Radio to an unused FM frequency, then tune
your Piston Modulator to the same frequency by long pressing the
Answer / End Call / Play / Pause Button until the radio frequency
displayed on the LED Screen flashes. Then press the
Previous Song / Volume Down / Radio Channel Down Button
or the Next Song / Volume Up / Radio Channel Up Button to
navigate through the frequencies. Press the Answer / End Call /
Play / Pause Button again to keep the frequency.
Insert a USB flash drive loaded with MP3 / WMA files into USB
Charging Port 2. Music files on the drive will play automatically.
If your Smartphone and Cable supports Quick Charge, it will charge
based on the Qualcomm QC 3.0 Protocol. Please check the official
Qualcomm QC product list of supported devices through the
following link:
https://www.qualcomm.com/documents/quick-charge-device-list
USB MODE
QC3.0 USB PORT

5
BLUETOOTH MODE
Pairing with Bluetooth Devices
Your Piston Modulator must be paired to a Bluetooth device before
its Bluetooth Mode can be used. It is only necessary to pair your
modulator once with each device.
1. Open the Bluetooth Menu on the device you wish to pair. Some
devices require you to select “search for devices” or “add new
device” in order to create a Bluetooth pairing.
2. Plug the Modulator into your vehicle’s cigarette lighter or
power port.
3. Wait until you see “Piston” on your device screen.
4. Select “Piston” on your device and follow any further prompts to
pair. Once pairing is complete, the Modulator will be ready to
play audio via Bluetooth.
Note: If you are unsure on how to access your Bluetooth Menu on
your device, please refer to your device’s instruction manual.
Locating the Bluetooth Menu
iPhone, iPad, and iPod Touch
a) On your device, go to Settings.
b) Select Bluetooth. If Bluetooth is not on, turn it on.
c) The iPhone / iPad / iPod will automatically search for
new devices.
Android™ Phones and Tablets
a) On your device, go to the Settings Menu.
b) Select Bluetooth (on older Android devices Bluetooth is
found in the Wireless & Networks menu). If Bluetooth is not
on, turn it on.
c) Select “Search for Devices” if your phone or tablet does not
automatically search for new devices.

Connecting with Paired Devices
Once the Piston Modulator is switched on, it will automatically
connect with the last paired Bluetooth device that is on and within
range. If the Piston Modulator does not connect automatically, open
the Bluetooth menu on your device and select “Piston” from the
Bluetooth device list.
Changing the Volume
Function Operation
Increase Volume Long press the Next Song / Volume Up /
Radio Channel Up Button
Decrease Volume Long press the Previous Song / Volume
Down / Radio Channel Down Button
Bluetooth & USB Modes
Function Operation
Navigate to Next
Track
Short press the Next Song / Volume Up /
Radio Channel Up Button
Navigate to Previous
Track
Short press the Previous Song / Volume
Down / Radio Channel Down Button
Play or Pause Track Short press the Answer / End Call / Play /
Pause Button
6

7
Controlling Phone Calls
Status Function Operation
Incoming Call
Answer Call Short press the Answer /
End Call / Play / Pause Button
Reject Call
Press and Hold the Answer
/ End Call / Play / Pause Button
for 3 seconds
Call In
Progress End Call Short press the Answer /
End Call / Play / Pause Button
Redial Redial Double press the Answer /
End Call / Play / Pause Button
Toggle Audio
Output Toggle Audio Output
Press and Hold the Answer
/ End Call / Play / Pause Button
for 3 seconds during a phone
call.

8
• The product should only be used with the parts provided by the
manufacturer.
• This product is intended for indoor use only.
• The Piston Modulator is intended for personal use only.
Commercial use invalidates the warranty and the supplier cannot
be held responsible for injury or damage caused when using the
device for any other purpose than that which it was intended for.
• This is not intended for use by children, or persons with reduced
physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or
instruction concerning use of the device by a person responsible
for their safety. Extreme caution must be exercised.
• Children should be supervised to ensure that they do not play
with the Piston Modulator. Packaging must never be left within
reach of children since it is potentially dangerous.
SAFETY PRECAUTIONS

9
All product and company names are trademarks™ or registered®
trademarks of their respective holders. Use of them does not imply
any affiliation with or endorsement by them.
DISCLAIMER
ENVIRONMENTALLY FRIENDLY DISPOSAL
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact your local government for information
regarding the collection systems available.
If electrical appliances are disposed of in landfills
or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging
your health and well being.
Before Cleaning: Ensure that your Piston Modulator is not plugged
into your cigarette lighter before cleaning or maintaining it.
Cleaning: Wipe down the surface of your Piston Modulator using a
soft, slightly damp cloth.
Do not use any harsh or abrasive cleaning chemicals or materials
on your Piston modulator as doing so may damage or scratch the
surface finish.
Do not expose your Piston Modulator to high temperatures for
extended periods of time.
Do not store in temperatures over 140°F (60°C).
CLEANING & CARE INSTRUCTIONS

This Volkano Piston Series Modulator includes a standard 12-month
limited warranty against manufacturing defects and faults. Should
your product be unboxed with any faulty parts, poor finishing or
visible damage, or fail to perform due to a manufacturing defect or
poor workmanship, please return it with your proof of purchase (till
slip or invoice) to the store of purchase for an exchange, or repair,
depending on the store’s returns policy.
This warranty commences from the date of purchase.
Kindly retain your proof of purchase as well as the packaging for
your warranty period.
NOTE:
The Warranty does not apply to a Product that:
a.) Has failed due to excessive wear and tear beyond what is
considered to be reasonable.
b.) Has been misused or neglected.
c.) Has been damaged accidentally or by acts of God including fire
and flooding.
d.) Has been used or operated contrary to operating or
maintenance instructions outlined in this manual.
The Store of Purchase / Seller cannot accept any returned products
that have not been returned with accordance with this warranty or
which does not follow their own Returns Policy. Please refer to the
Store of Purchase / Sellers Returns Policy for details.
Should you require any further assistance or have any questions on
your warranty, please contact the store of purchase.
WARRANTY
10