3-1-21
1 of 2
VOLVO WATER SPORTS MFD –COMMON SETTINGS
(SURF MODELS)
If equipped with a single Water Sports MFD (multi-function display) and separate round gauges, the fuel level will be
analog driven and displayed on the separate speed/fuel gauge. The MFD will not give digital fuel level.
If equipped with two Water Sports MFDs (multi-function displays), all data capabilities such as maps, sonar, and
engine data can be displayed on either screen. The screens do not have to display the same information. You can have
maps on one display and vessel/water sports information on the other. The right screen is normally the default screen
for surf control (Water Sports).
Ensure all three seacocks are in the open position and two hoses are attached to each bag before attempting to fill the
ballast bags. The seacocks are located in the engine compartment, just forward of the engine. The ballast bags are
under cockpit seats and in the ski locker (select models).
To turn on commonly used information on the displays:
➢To replace the VIRB display on the Water Sports screen so it will display fuel level, speed, and depth:
oHome
oMenu
oEdit layout
oWater Sport Control
oTap the VIRB window (lower left)
oGauges
oDone
oIn the lower left window, press & hold ‘Engine RPM’
oReplace data
oGPS
oGPS speed
oBack
➢To set up the left screen (twin MFD installations only):
Your choice of vessel information, charts, or sonar.
➢For vessel information:
oHome
oEngine
•Three gauges appear.
•Multiple pages are available by touching the arrow buttons at the bottom of the screen.
➢For charts:
oHome
oCharts
oSelect desired type
➢For sonar:
oHome
oSonar
oSelect desired type