Vonyx SMS10 User manual

SMS10 Studio Monitor Stand
Ref. nr.: 180.217
INSTRUCTION MANUAL
V1.0

www.tronios.com
Copyright © 2017 by TRONIOS the Netherlands
Tronios BV, Bedrijvenpark Twente 415, 7602KM Almelo The Netherlands
ENGLISH
Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to
benefit fully from all features.
This product is a stand for all standard laptop computers and MIDI-controllers. Please make sure, that all screws used to fix the
various components are tightly bolted down in order to avoid any accident.
ASSEMBLY INSTRUCTIONS
Step 1: Tightening the tube and base with screw and washer.
Step 2 : Using the hexagon wrench and screw to fix the top plate
and tube.
Step 3: You can stick EVA to the top plate if you like.
Step 4: Choosing the height you need and locking upper moving
tube with pin. Tightening the plastic knob.
Noted: You can fix sharp spike or rubber feet under the base.
When you adjust the height, you need take away the speaker.