
SAFETY INSTRUCTIONS
Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to
benefit fully from all features.
- This wall bracket should be installed by a trained and
experienced installer designated by the retailer. Having
the product installed by a non-specialized installer is very
dangerous and can cause damage or injury.
- Use a trained and experienced installer to move or
replace the wall bracket, if needed. Installation requires
special techniques. Moving or installing the product on
your own can cause serious safety issues.
- Do not install the product where the weight cannot be
supported. If the structural integrity of the location where
the bracket is installed is not strong enough, it can fall off
and cause injuries.
- If the product is damaged to such an extent that
structural integrity is questioned, do NOT use it. Contact
your dealer.
- All repairs should be carried out by a qualified technician
only.
- If the product has not been used for a longer period of
time, the product needs to be checked on structural
integrity and function.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- If the product has fallen, always have it checked by a
qualified technician before utilizing the product.
- This product contains small items that could be a choking
hazard if swallowed. Keep the product out of the reach of
children. Do not leave the product unattended.
- Always ensure that the correct screws and anchors are
used when installing this product.
- Make sure to align the bracket completely vertical
relative to the wall you have chosen to install the bracket.
- Improper installation may cause property damage or
personal injury.
- Preferably do not use cleaning sprays as residues of
these sprays cause deposits of dust and grease, which
can cause difficulties operating the product. In case of
malfunction, always seek advice from a specialist.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Do not use excessive force. Don not hang from the
product or apply severe impact to the product. The
product can fall off and cause injury.
- Only use original spares for repairs, otherwise the
product cannot guarantee its load-bearing capacity and
other stated specifications.
- Keep the original packing material so that you can
transport the product in safe conditions.
The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate
and their guarantee!
INSTALLATION
1. Drill holes, big enough to accommodate the correct bolt anchors.
2. Clean the drilled holes.
3. Insert anchors. If necessary use a hammer with care.
4. Position the bracket on the wall, aligning the product holes accurately with the drilled holes.
5. Put bolts in and cross-tighten securely.
TECHNICAL SPECIFICATION
Material: Metal
Dimension (folded): 70 x 260 x 415 mm
Max weight load (kg): 25,00
Weight (kg): 3,80
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed
without prior notice.
Specifications and design are subject to change without prior notice..
www.tronios.com
Copyright © 2019 by TRONIOS the Netherlands