voxicon VX-CAM500 User manual

1. QHD 1440P OPTICAL LENS
2. OMNI DIRECTIONAL MIC
3. ONLINE STATUS LED
4. POWER STATUS LED
5. ROTATABLE JOINT
6. FLEXIBLE CLIP/BASE
7. METAL TRIPOD MOUNT
8. USB CABLE

INSTALLING PRIVACY LENS COVER
THE PRIVACY LENS COVER
COMES WITH ADHESIVE
FOR INSTALLING OVER THE
CAMERA LENS.
FLIP OVER THE COVER AND
REMOVE THE WHITE STICKER
PROTECTING THE ADHESIVE.
FLIP OVER REMOVE
STICKER
PLACE AND FIRMLY STICK
LENS COVER OVER THEIA’S
CAMERA LENS AS SHOWN.
FLIP OVER THE LID OF LENS
COVER WHEN YOU NEED TO
USE YOUR THEIA CAMERA.

CONNECTING TO A COMPUTER
CONNECT USB PLUG TO YOUR COMPUTER
ANY USB TYPE-A (NOT TYPE C) PORTS OF
YOUR DESKTOP/NOTEBOOK PC OR MAC
SUPPORTS VX-CAM500 OUT OF THE BOX.
PLUG THE USB PLUG INTO ANY USB PORT
AND WAIT A FEW SECONDS FOR DRIVERS
TO LOAD AUTOMATICALLY. THERE IS NO
NEED TO INSTALL ANY ADDITIONAL DRIVER
OR SOFTWARE FOR VX-CAM500 TO WORK
PROPERLY.
SOFTWARE SUPPORT & DEVICE DRIVER
VX-CAM500 IS COMPATIBLE TO MOST
VIDEO RECORDING OR VIDEO CONFER-
ENCING SOFTWARES. HOWEVER, IT IS
DESIGNED TO WORK PERFECTLY WITH ALL
VERSIONS OF SKYPE, MICROSOFT TEAMS,
CISCO WEBEX AND ZOOM.
SELECT UVC CAMERA AS VIDEO DEVICE.

DO NOT PLACE OR STORE YOUR WEBCAM
IN ANY HOT OR EXCESSIVELY HUMID PLACE.
DO NOT CLEAN YOUR WEBCAM WITH ANY
FORM OF CHEMICAL SUBSTANCE, ONLY USE
WARM WATER. DO NOT TRY TO DISSEMBLE
ANY PART OF THE WEBCAM EXCEPT
REPLACING THE LENS COVER. DO NOT USE
OR PLACE THE WEBCAM IN ENVIRONMENTS
OF EXCESSIVE DUST OR MINUTE PARTICLES.