VRL WASH-493 User manual

2
Table of Contents
1. Introduction------------------------------------------------------------------------------3
Feature-----------------------------------------------------------------------------------3
Mode--------------------------------------------------------------------------------------3
Configuration----------------------------------------------------------------------------3
Angle--------------------------------------------------------------------------------------3
2. Safety Information---------------------------------------------------------------------4
3. Installation and Setting---------------------------------------------------------------5
4. Operation Instruction------------------------------------------------------------------6
Panel--------------------------------------------------------------------------------------6
Menu Instruction------------------------------------------------------------------------6
Instruction for the fixtures’ connection and the pins in and out------------10
5. DMX and Channel Distribution----------------------------------------------------10
6. Maintenance and Cleansing-------------------------------------------------------12
Troubleshooting-----------------------------------------------------------------------12
Cleansing-------------------------------------------------------------------------------12
7. Technical Specification--------------------------------------------------------------13

3
Introduction
Thank you for purchasing VRL WASH-493 high power LED wall washer. This product is
featured with balanced mix of red, green and blue LED, and operated via DMX, stand-alone
and master/slave.
Features
＊16.7Million different colors can be produced by mixing the red, green and blue LED
＊Linear brightness adjustable
＊Desired strobe adjustable
＊Color preset, and “rainbow” color available.
＊Manual setting of the technical specification
＊180 rotation display
＊D Di ig gi it t d di is sp pl la ay y E En ng gl li is sh h M Me en nu u
＊Digit tube’s brightness adjustable
＊D DM MX X- -5 51 12 2 c co on nt tr ro ol l， ，8 8 D DM MX X c ch ha an nn ne el ls s
＊Over-heat protection
＊Capability of self-testing
＊Record the running time of different color LED
＊Record the total running time of the fixture
＊5 editable programs (each program with 10 scenes at most)
＊36 time-activated editable with each program’s start and end setting available.
Mode
＊DMX-512 control
＊Stand-alone through the internal program
＊Possibilities to set the stand-alone program for everyday within one week
＊30 fixtures run via Master/Slave
＊You can set the fixtures’ DMX address
Configuration
＊24 pcs 1W Red LED，18 pcs 3W Green LED, 7 pcs 3W Blue LED
Angle
＊PAN adjustable -15°---75°
＊TILT adjustable -50°---50°
＊Optical Angle 25°

4
Safety Information
Read this manual before powering on or installing the fixture. Follow the safety information
listed below and observe all warnings in this manual. If you have any questions about how to
operate this fixture safely, please contact the dealer or VRL.
Make sure the fixture is always electrically grounded. And use only the power supply in
compliance with electrical code.
Replace the fuse and the bulbs with the same specified type.
No spare parts are available. If needed, please contact VRL.
Do not operate in temperatures above 104 Degree Fahrenheit
If you have any problems, please contact the professionals or the technicians.
Note : (How to ground )
Under the circumstances that the mains power is not grounded (earthed), it is
strongly recommended that the base housing should be grounded (earthed) in
case of the potential damage caused by the electrostatic or electricity
accumulation.

5
Installation and Setting
Mounting
PAN & TILT Adjustment
For PAN or TILT adjustment, please use the 6mm hex key for TILT and 3mm hex key for
PAN.

6
Operation Instruction
Panel
2 3 4
1Digit Screen
2Enter
3Down
4Up
Menu Introduction
No
.
Name
Displa
y
MasterMenu
Content
Content
Change
Subsidiar
y
Menu
Content
Content
Change
Enter
into the
Subsidiar
y Menu
Function
1
Address
A001
Press
“enter” into
the content
Up/Dow
n
To
change
Set
the DMX
starting
channel
2
Balance
balanc
√
Rblac
Press
“enter” for
2-3s
Set the
RG,B
balance
Gblac
Bblac
enable
3
Boost
boost
Press
“enter” into
the content
Default
OFF
Default
Boost off
4
Red Led
Run Hour
R_H
Press
“enter” into
the content
Up/Dow
n
To
change
Red LED
running
Time
5 Green
Led Run
Hour
G_H Press
“enter” into
the content
Up/Dow
n
To
change
Green
LED
Running
time
1

7
6
Blue Run
Hour
B_H
Press
“enter” into
the content
Up/Dow
n
To
change
Blue LED
Running
Time
7
Device
Run Hour
L_H
Press
“enter” into
the content
Up/Dow
n
To
change
Set the
running
time
8
Signal
signal
Press
“enter” into
the content
Up/Dow
n
To
change
Select
DMX
9 brightness bright Press
“enter” into
the content
Up/Dow
n
To
change
Adjust
The
brightnes
s of
The
Screen
10 Display
Flip
Or Not
DSPF
LI Press “enter” into
the content
Up/Dow
n
To
change
Flip the
screen or
not
11
Dmx
delay
Dmxdl
Press
“enter” into
the content
Up/Dow
n
To
change
Set the
Lasting
Of last
Scene
After
The DMX
Signal is
Gone.
12 Time time
√
YEAR
Press
“enter” for
2-3s
Set the
internal
time of
the
projector
M/D
H:M
WEEK
13
Factory
Parameter
s
FACT
Press
“enter” into
the content
Up/Dow
n
To
change
Restore
the
default
paramete
r
14
Previous
Parameter
s
PREV
Press
“enter” into
the content
Up/Dow
n
To
change
Restore
the
previous
paramete
r set
15
Test
test
√
Red
Press
“enter” for
2-3s
Test
White &
Amber
LED
Green
Blue
CTC
All
shutt
Dimer

8
16
Temperat
ure
tempe
r
Press
“enter” into
the content
Up/Dow
n
To
change
Show the
projector’
s
head
temperat
ure in
Celsius or
Fahrenhe
it
17 Master maste
r Press “enter” into
the content
Up/Dow
n
To
change
Set
To
Master
Or
Slave
Mode
18
Slaver
SlavID
Press
“enter” into
the content
Up/Dow
n
To
change
Via
Slave
Set
The
Slavers’
ID
19 Schedule
Enable or
not
Sched Press
“enter” into
the content
Up/Dow
n
To
change
Enable
the
program
Playback
as
schedule
d or not
20 Program
Run Pgrun Press “enter” into
the content
Up/Dow
n
To
change
Select
The
program
21
Program
Set
Pgset
√
Prog
Press
“enter” for
2-3s
Edit
the
running
program
of
The
projector
SCEN
FIXT
shutter
dimme
R
G
B
mac
tm_h
tm_m
tm_s
fd_h
fd_m
fd_s
SCNRU
N

9
22
Schedule
Sched
u
√
event
Press
“enter” for
2-3s
Edit
the time-
activated
events
program
day
start
end
enable
The Function of Subsidiary Menu
Ⅰ.Pgset Subsidiary Menu：
Pgset：Press “enter” for 2-3 minutes to the lower-ranking menu and edit the
parameter of each program.
（1）、 SCEN：select the scenes 1-10
（2）、 FIXT：The slaver’s no. is selectable via Master. : All, Odd, Even, certain
slaver.
（3）、 shutter：edit the shutter of the scene. “ fast shutter”, “gradual bright-up
and fast black-out”, “fast bright-up and gradual black-out”, “random
shutter” etc. available. For each style, the speed is selectable.
（4）、 dimmer：Edit the brightness of the current scene.
（5）、 R=000/ G=000/ B=000:RGB LED Brightness
（6）、 mac：Select the internal effect of the projector.
（7）、 tm_h、tm_m、tm_s：Set the scenes’ running time (hour, minute and
second)
（8）、 fd_h、fd_m、fd_s：Set the fade time of the current scene (hour, minute
and second).
（9）、 SCNRUN：Enable the scene.
After the setting, please press “enter” for 2-3 minutes to save the
parameter.
Ⅱ.SCHEDU Subsidiary Menu：
Parameter for every event
（1）、 event：Select the event to be edited
（2）、 program：Select the program
（3）、 day：Select the running weekday from Monday to Sunday.
（4）、 start：Select the exact start time of the event
（5）、 end：Select the exact ending time of the event.
（6）、 enable：Enable the event

10
一、 Instruction for the fixtures’ connection and the pins in and out
I. Fixtures’ Connection：
II. Pins in and out 3 /5
DMX and Channel Distribution
No
Value Function
1 Shutter/Strobe
0-3
Close
4-6
Open
7-59
Strobe (1~20Hz) fast slow
60-69
Fade Strobe open fast slow
70-78
Fade Strobe close fast slow
79-87
Random Strobe fast slow
others
Open
2
Dimmer
0-255 the brightness of the lamps
3
R
0-255
the brightness of red color
4
G
0-255
the brightness of green color
5 B0-255 the brightness of blue color
6
Color
temperature
0-19
Off
20-255
+6500 k° to 4500 k° ( compared to white)
7 Macro Channel
0 - 7
no effect
8 - 15
Rainbow slow-speed –stand time 5s

11
16 – 23
Rainbow medium-speed –stand time 5s
24 - 31 Rainbow fast-speed – stand time 5s
32 - 39
Rainbow slow-speed –no stand time
40 - 47
Rainbow medium-speed - no stand time
48 - 55
Rainbow fast-speed - no stand time
56 - 63
Rainbow super slow-speed - no stand time
64 - 70
slow-speed random color
71
store color mode enable
72 - 79
medium-speed random color
80 - 87
fast-speed random color
8 White balance
control
0-63
White balance disabled
64-188
White balance enabled
189-250
White balance disabled
251-255
Store the new white balance (step as follow)
1.Set White balance control to “220”
2.Set the RGB DMX value
3.Set Macro to “71”
4.Set White balance control to “255”
5.The new white balance is stored in
stand time 4
seconds.

12
Maintenance and Cleansing
一、 Troubleshooting
Trouble Cause Remedy
Fixtures do not respond.
No power supply
Check the mains power
switch and the cables.
Fuse burned
Disconnect the power and
replace the fuse.
If fuses
continue to burn out, there
is a problem with the
circuitry. Please consult a
technician
The reset is normal. But the
fixtures do not respond or
act abnormally via
controller or Master /Slave.
Incorrect or incomplete
data connection
Check the data cable.
Ensure the signal input of
the first fixture and the
output of the controller to
be connected.
Whether set to Master
mode or not
Set to Slave mode via DMX
control
Wrong DMX address
Check and unify the
address setting.
The signal port of one lamp
has failures.
Pull out the signal output
and input of one fixture.
Then connect both directly.
Do the same with the rest
of the fixtures to see which
fixture has problems. If you
find a problem with one of
the ports, contact a
technician.
The signal output of the
controller doesn’t match the
signal input of the lamp.
（PINS2—3 incorrect）
dial“PHASE”，interchange
PIN2 and PIN3’s position
二、 Cleansing
Washer VRL WASH-493 requires simple routine maintenance to ensure its long life span and
best performance.
1. Maintain the cleaning of the fan and the air vents. Dust should be removed from the fan
and the vents periodically to secure the cooling and heat dissipation.
2.Maintain the cleaning of the optical components.
3.Make sure everything is electrically grounded for safety.
Technical Specification

13
*
* D Di ig gi it t d di is sp pl la ay y， ，E En ng gl li is sh h M Me en nu u
*
* D DM MX X- -5 51 12 2 c co on nt tr ro ol l， ，8 8 D DM MX X c ch ha an nn ne el ls s
*
* S St ta an nd d- -a al lo on ne e o or r M Ma as st te er r/ /S Sl la av ve e
*
* T Th he e c co ol lo or r b br ri ig gh ht tn ne es ss s i is s d di iv vi id de ed d i in nt to o 2 25 55 5 l le ev ve el ls s. .
*
* D Di im mm mi in ng g : :0 0- -1 10 00 0% %
*
* P Po ow we er r: : 1 11 10 0W W
*
* L Lu um mi in no ou us s I In nt te en ns si it ty y: : 5110Cd
*
* Luminous Flux: 1596Lm
*
* Optical Angle:25°
*
* m ma ai in ns s p po ow we er r i in np pu ut t： ：A AC C1 10 00 0- -1 12 20 0V V/ /6 60 0H Hz z, , A AC C2 20 00 0- -2 24 40 0V V/ /5 50 0H Hz z
*
* S Si iz ze e ： ：L L3 37 76 6m mm m* * W W2 23 32 2 m mm m* * H H4 43 32 2 m mm m
* W We ei ig gh ht t ： ：1 13 3. .5 5k kg g