VTD Technology VTD201 User manual

Bluetooth Speaker User Manual
VTD201
USAGE
Pairing the Bluetooth
1. Turnontheunit,flashingblueLEDindicator
with prompt tone,Bluetoothpairing.
2. Gotoyourdevice’sBluetoothsettingsand
turn the Bluetoothon.
3. SelectNORMANDYINSURANCEfromthelist.
(Please refer to your device’s usermanual
for detailed Bluetooth settings.)
4. Enter 0000(zero) if asked for a PINCODE
andconfirm.SolidblueLEDindicator,paired
successfully.
5. Allow your device’s music player to be
connected to NORMANDY INSURANCE if asked
forpermission.
(Some device may not ask for Step4&5.)
SPECIFICATION
Material: ABS+PVC
Battery Capacity: 3.7V/230mAh
Speaker: 2W/4Ω
Output Power:3W
Frequency:100HZ-20KHZ
Charge voltage:5V
Bluetooth:JL
Distance:10M
Full Charge Time: 1 hour
Bluetooth Speaker User Manual
VTD201
USAGE
Pairing the Bluetooth
1. Turnontheunit,flashingblueLEDindicator
with prompt tone,Bluetoothpairing.
2. Gotoyourdevice’sBluetoothsettingsand
turn the Bluetoothon.
3. SelectNORMANDYINSURANCEfromthelist.
(Please refer to your device’s usermanual
for detailed Bluetooth settings.)
4. Enter 0000(zero) if asked for a PINCODE
andconfirm.SolidblueLEDindicator,paired
successfully.
5. Allow your device’s music player to be
connected to NORMANDY INSURANCE if asked
forpermission.
(Some device may not ask for Step4&5.)
SPECIFICATION
Material: ABS+PVC
Battery Capacity:3.7V/230mAh
Speaker: 2W/4Ω
Output Power:3W
Frequency:100HZ-20KHZ
Charge voltage:5V
Bluetooth:JL
Distance:10M
Full Charge Time: 1 hour
Bluetooth Speaker User Manual
VTD201
USAGE
Pairing the Bluetooth
1. Turnontheunit,flashingblueLEDindicator
with prompt tone,Bluetoothpairing.
2. Gotoyourdevice’sBluetoothsettingsand
turn the Bluetoothon.
3. SelectNORMANDYINSURANCEfromthelist.
(Please refer to your device’s usermanual
for detailed Bluetooth settings.)
4. Enter 0000(zero) if asked for a PINCODE
andconfirm.SolidblueLEDindicator,paired
successfully.
5. Allow your device’s music player to be
connected to NORMANDY INSURANCE if asked
forpermission.
(Some device may not ask for Step4&5.)
SPECIFICATION
Material: ABS+PVC
Battery Capacity:3.7V/230mAh
Speaker: 2W/4Ω
Output Power:3W
Frequency:100HZ-20KHZ
Charge voltage:5V
Bluetooth:JL
Distance:10M
Full Charge Time: 1 hour
Bluetooth Speaker User Manual
VTD201
USAGE
Pairing the Bluetooth
1. Turnontheunit,flashingblueLEDindicator
with prompt tone,Bluetoothpairing.
2. Gotoyourdevice’sBluetoothsettingsand
turn the Bluetoothon.
3. SelectNORMANDYINSURANCEfromthelist.
(Please refer to your device’s usermanual
for detailed Bluetooth settings.)
4. Enter 0000(zero) if asked for a PINCODE
andconfirm.SolidblueLEDindicator,paired
successfully.
5. Allow your device’s music player to be
connected to NORMANDY INSURANCE if asked
forpermission.
(Some device may not ask for Step4&5.)
SPECIFICATION
Material: ABS+PVC
Battery Capacity:3.7V/230mAh
Speaker: 2W/4Ω
Output Power:3W
Frequency:100HZ-20KHZ
Charge voltage:5V
Bluetooth:JL
Distance:10M
Full Charge Time: 1 hour

Bluetooth Speaker User Manual
VTD201
FCC Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions
(1)this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority
to operate the equipment.