vtrek WC 603 User manual

USER MANUAL
WC 603
Classroom Bluetooth Speaker

Features .....................................................................................................................2
For your Attention.....................................................................................................3-4
Panel.......................................................................................................................5-6
Connections...............................................................................................................7
Trouble shooting.........................................................................................................8
Specifications.............................................................................................................9
Contents
Contents
-1-

Features
-2-
Thanks for your purchase of our product. Please read through this manual before making
connections and operating this product. Retain this manual for future reference.
Bluetooth playback
AUX input
Package Contents:
User manual
User manual
DC adaptor

IMPORTANT NOTES
For Your Attention
Please read throughthis manual beforemaking connections andoperating this product.Retain this manualfor
future reference.
Don't open thecabinet of thisunit. No user-serviceableparts inside. Referservicing to qualifiedpersonnel only.
Switch off the unit whenyou don't useit. Switch off the unitand disconnect itfrom theAC power supplywhen it is
not being usedfor a longtime.
Don't install theunit in aplace exposed toheating sources ordirect sunshine.
Don't install theunit in aplace exposed tomoisture or rain.
The apparatus shallnot be exposedto dripping orsplashing and anyobject filled withliquids, such asvases shall
not be placedon it.
Install the uniton a horizontal,flat and firmsurface with goodventilation. Never blockthe vents whichwill cause
malfunction resulted fromoverheating.
Use a softand clean ragto clean theoutside of theunit . Neverclean it withchemicals or detergent.
This book isonly a guidefor user's operation,not a criterionfor configuration.
Only use attachments/accessoriesspecified by themanufacturer.
Where the mainsplug is usedas the detachable device, the detachable device shall remainreadily operable.
-3-

For Your Attention
-4-

Panel
-5-
1. VOLUME+/-
2. STANDBY/SOURCESELECT
3. PLAY/PAUSE
4. PREVIOUS/NEXT
(Note: Allthe button onthe front panelare touch keys)
5. STANDBY(red indicator)
6. BLUETOOTH (blinkingblue indicates pairing,solidblue indicates connected)
7. AUXIN (yellow indicator)
Press to turnup/down the volume;
Press to
Press to temporarilypause a playback;press it againto resume theplayback;
Press to returnto the previoustrack or skipto the nexttrack;
switch on theunit;
Press repeatedly toselect a signalsource between Bluetoothor AUXinput mode;
FRONT PANEL:
1
2
3
4
5
6
7

Panel
-6-
1. USB CHARGEPORT (5V)
(Note: Use the USBcable (not included)toconnect the USBand charge device.The charge port cannotcharge battery in standby mode.
There is noconnection with thespeaker after 10~15minutes (noAUX input, USB charge or bluetooth connection),
the speaker willturn to standbymode automatically andthe red indicator light will illuminate. Press [PLAY/PAUSE]
to wake upthe speaker.
The speaker willturn to autostandby mode afterabout 10~15 minutes.
The unit cannotplay music viaUSB charging port.
2. AUX INPUT
3. DC IN(10V)
4. POWER ON/OFF
123
REAR PANEL:
4

Connections
-7-
AUX IN
This unit has an audio input terminal.
Use the audio cable(not included) to connect the input terminal AUX IN
on the rear panel of this player, press [SOURCE ] button on the
front panel toswitch to the AUX IN mode, the indicator onthe front panel
indicates in yellow that the player has been switched to AUX IN mode.
SELECT
Bluetooth Connection
The model ofthe unit is WC 603,press [SOURCESELECT] button on
the front panel to switch to the corresponding signal source, use your
mobile phone tosearch the bluetooth signal of theunit, then input the
password 0000, the unit will synchronize to play songs on your mobile
phone while they connected successfully.
Disconnect the bluetoothon the mobile phone to switchoff the bluetooth
connect.
In bluetooth mode,[PLAY/PAUSE],[NEXT], [PREVIOUS],
[VOLUME+/-] etc. are also active.
Once the bluetoothis connected to your audio devicesuccessfully for
the first time, you can power off the player then power on. The speaker
will reconnect automatically.Press [PLAY/PAUSE] to resume the
playback.
Note: Bluetooth connection rangeis 30 feet.
The model WC 603 in your device was not deleted.
Bluetooth
Model:WC 603

-8-
Troubleshooting
Before resorting tomaintenance service, pleasekindly check byyourself with thefollowing chart.
Sound
There is nosound or
the sound is
distorted.
The volume isset to theminimum level. Turn up the volume.
Symptom Cause(s) Remedy
The buttons onthe
unit do not work.
Switch off andunplug the unit.
Then connect theplug to the power supply
and switch iton again.
The unit isbeing interfered with static electricity
etc.
The DC power cordis not connected tothe power
supply or is notconnected to a powersupply
securely.
Please check thatthe DC power cord
is connected securely.
No Power
Audio device isnot connected to the unit. Connect audio devicevia Bluetooth
or Auxin.

5WX2
-9-
Specifications
Power supply
DC 10V 1.5A
Working
environment
Temperature -10~+35
Relative humidity
5%~90%
Speaker output (Max)
Power consumption 15W