Vuly Quest L User manual

Visit www.vulyplay.com/install
for step by step video instructions, or scan this QR code
Quest
™
MANUAL L
SAFETY INFORMATION, INSTALLATION AND USAGE INSTRUCTIONS.
READ PRIOR TO INSTALLING AND USAGE.
See VulyPlay.com/support for any updates to these instructions.
ATTENTION!
If you have any feedback regarding our instructions, feel free to
email [e-mail] so that we can continue to improve.

ATTENTION!
Safety information, installation and use instructions.
Read prior to installing and using the monkey bar system.
See VulyPlay.com/support for any updates to these instructions.
YOU WILL NEED THESE FOR ASSEMBLY!
Vuly Play
95 Ingleston Rd, Brisbane QLD 4154
AU: 1300 667 514
US: 1-800-467-1421
www.vulyplay.com
WARNING:
To reduce the risk of injury while using the system, enforce the following:
• Minimum user age – 6 years.
• Maximum number of users – 6.
• Adult assembly required.
• Adult supervision required at all times.
• Ensure that the system is secured with anchors or bolts before use.
• Exercise caution at heights. Maximum fall height is 1 m.
• Ladder
• Rubber mallet
• Tape measure or ruler

3
Contents
Read and follow all instructions in this manual before using
your system, and do not use it in any way that is not described
in this manual.
1.0. Care and Maintenance
1.1. General care
1.2. Rust and corrosion
1.3. Textile deterioration
1.4. Weather care
2.0. Usage and Behaviour
2.1. Safe use information
2.2. Safe use instructions
3.0. Pre-assembly
3.1. Size Reference
3.2. Tips & Tricks
3.3. Parts and components
4.0. Assembly instructions – Vuly Quest
5.0. Product registration
6.0. Half-price replacement parts
7.0. Warranty
7.1. Warranty periods
7.2. Inclusions
7.3. Exclusions
7.4. Warranty Claims
7.5. Australian Consumer Law
8.0. Missing parts
4
4
4
4
4
5
5
5
6
6
7
8
13
52
52
52
52
52
52
53
53
53
Responsibility rests with the owner and supervisors of the
product to make sure that all users are aware of the practices
specified in this manual.

4
1.0. Care and Maintenance
Improper maintenance or lack of care can lead to your system deteriorating earlier than expected and causing injury. Please
follow these instructions to ensure that your product lasts for as long as possible.
1.1. General care
• Retain this Manual.
• Inspect before and after each use.
• Replace any worn, deteriorated, defective or missing parts
immediately and only through Vuly.
• Tighten all hardware, including elements that secure the system
to the ground.
• Keep away objects that could damage textile components.
• Ensure that moving steel components remain well lubricated.
• Use only parts and accessories recommended by Vuly.
1.2. Rust and corrosion
• Be aware of, and check, areas that are particularly prone to
rusting:
○ Places where water is easily trapped.
○ Hollow sections of steel (which can appear in good
condition on the outside, while hiding rust on the inside).
○ Sections where steel components join together.
• Inspect the inside of all tubes every 6 months – as well as after
rain – and remove any water from the inside surfaces.
• Use general-purpose grease on steel connection areas.
• Avoid cleaning steel components excessively; it may reduce the
effectiveness of their protective coatings.
1.3. Textile deterioration
• Remove textile parts, and store them – in their original packaging
– in a cool, dry and dark place when the system will be unused
for over 1 month. Prolonged exposure to UV sunlight can shorten
the lifespan of textile materials.
1.4. Weather care
Components are susceptible to deterioration from use and
environmental conditions – such as sunlight, rain, salt and heat – to
varying degrees.
If your system will be unused for any extended period, disassemble
it, return it to its original packaging and store it in a dry place.
RAIN: Remove any fallen debris after rain and wipe off
residual water with a dry cloth. Moisture left on the
WIND: Disconnect any accessories, and cover the frame with
a storm cover.
HEAT: Cover when not in use to minimise UV damage.
COMPONENTS WILL DETERIORATE OVER TIME.
Record your date of purchase here:
/ /

5
2.0. Usage and behaviour
Improper use of, or behaviour on, your system can lead to serious injury. Please follow these usage and behaviour instructions
to ensure safe play.
2.1. Safe use information
• Maximum user weight: 750 kg.
• Domestic and outdoor use only.
• Suitable for ages 6 and over.
• Maximum users at one time: 6
WARNING:
To reduce the risk of injury while using the system, enforce the following:
ADULT SUPERVISION IS REQUIRED AT ALL TIMES WHILST EQUIPMENT IS IN USE.
VULY CARES ABOUT SAFETY.
• Ensure that the system has been assembled by an adult, in
accordance with the assembly instructions.
• Ensure that the system has been checked over before use, and
that all attachments are secure.
• Do not use in strong wind conditions or wet weather, and keep
the system secure.
• Ensure active and competent adult supervision at all times while
children are using the system.
• Wear comfortable clothing, which allows full and free movement,
and closed-in footwear.
• Ensure that the system has been checked over before use, and
that all attachments are secure.
○ Do not wear jewellery, drawstrings, cords, loops, buckles or
anything that could entangle in components and become
a strangulation hazard, a contact hazard or damage the
system
○ Empty pockets and hands before use
• Exercise caution at heights.
• Make sure that the areas around, underneath and above the
system are clear.
• Demonstrate safe use for children before allowing them onto
the system.
• Do not walk close to, in front of, behind, or between moving
items.
• Do not to attach items that are not specifically designed for
use with the system, such as – but not limited to – jump ropes,
clothesline, pet leashes, cables and chains.
• Install the system on level ground and in a well- lit area, no less
than 2 m (6 ft) from any structure or obstruction – such as a
fence, garage, house, overhanging branches, laundry lines, or
electrical wires.
• Ensure that your chosen surface allows the system to be firmly
embedded with the included Anchor Kit or with strong bolts.
• Preference installing the system on a surface with impact-
attenuating properties – such as grass. A fall onto a hard surface
can result in serious injury or death to the equipment user.
• Check that you have all parts required for assembly.
• Lock nuts and bolts securely.
• Children must not use the equipment until properly installed.
2.2. Safe use instructions

6
4
75CM
3
9
0
C
M
3.0. Pre-assembly
3.1. Size Reference
3.2. Tips & Tricks
3.2.1. Joiner Fitting
Difficulty in inserting joiners to frame tubes can be resolved by
inverting the tube and tapping the internal joiner against a scrap
piece of wood.
To align the joiner holes with the holes in the frame tube, take the
large 8mm Allen key and insert it into the top hole in the joiner tube
then twist until the holes align. If further alignment is required, remove
the Allen key and place it through the holes in the joiner and the
tube. Use the Allen key to leverage the holes into alignment.

7
3.2.2. Uneven Ground
If assembling the Quest on uneven ground adjusting the flip rails will reduce rocking. If the Quest still seems unsteady, loosen the feet and
move them down slightly.
3.2.3. Exploded View

8
2X
A4
A5
A6
A7
2X
2X
3X
A3 2X
A2 2X
A1 2X
BOX A
8X
A8
18X
A9
1X
A10
3.3. Parts and components
DO NOT REMOVE PARTS FROM CARTONS UNTIL REQUIRED, OR MIX CARTON CONTENTS.

9
1X
B4
B5 8X
B3 1X
B2 3X
B1 4X
BOX B
4X 8X
B6 B7
2X
B8

10
4X
C4 C3
4X
C2 4X
C1 4X
BOX C
BOX E
2X
E1
E2
E3
E4
1X
1X
1X
E5
6X

11
BOX F
F1 2X
F2 2X
F3 2X
2X
F4
2X
F5
7X
F6
BOX G
G1 4X
G2 2X
G3 4X 2X
G4
6X
G5
8X
G6
4X
F7

12
BOX SHADE
COVER
5X5X40X
L1 1X
L2 1X
L3 1X
L4 1X
L5 L6 L7
1X

13
2
A8
A8
CLIMBING RAIL
PRE-ASSEMBLY You will require the following: • Ladder • Rubber mallet • Tape measure or ruler
ENSURE THAT AS YOU ASSEMBLE THE PRODUCT, YOU FIRMLY TIGHTEN ALL NUTS AND BOLTS, UNLESS DIRECTED.
scan this QR code for video instruction:
1

14
3
4
A9
A7
A6
A5
A4
Make sure that the straight Climbing Bars are in the middle, and the angled Climbing Bars are in the either
ends of the Climbing Rails.
Ensure that the bolts are not overly tight. You may need to rotate some Monkey Bars to fit into the remaining
Climbing Rail.

15
6
5
A9

16
8
7
G5
G1
60 MM
FRAME

17
9
10
G3
B1
B5
4
QTY
WARNING: Ensure that you align these parts correctly. Once inserted, they will be very difficult to remove or adjust.

18
11
12
4
QTY
G6

19
13
14
B4
B2
B7
1
QTY
YOU HAVE A CARGO NET? SKIP TO STEP 21

20
15
16
B2
B2
B7
1
QTY