Vuly Basketball Set User manual

Basketball Set
MANUAL

2
PAGE 5
Assembly for Flare
BASKETBALL SET | INDEX
PAGE 6
PAGE 14 PAGE 15
Assembly for Thunder, Lift and Vuly series
PAGE 8
Assembly for Ultra
PAGE 10
Assembly for Classic
Assembly for 360 Pro Assembly for Max

3
BASKETBALL SET | MAINTENANCE AND CARE & SAFE USE
Improper use or lack of care can lead to your Basketball
Set deteriorating earlier than expected. Please follow all
of these care instructions to ensure that your Basketball Set
lasts for as long as possible.
IMPORTANT NOTES
Metal Rust and Corrosion
• Be aware of areas that are particularly prone to rusting:
- Places where water is easily trapped.
- Hollow sections of steel (which can appear in good
condition on the outside, while hiding rust on the inside).
- Weld lines.
- Sections where different metal components join together.
• Inspect the inside of the tubing every 6 months, and
remove any water. Check tube and pole connection areas
for rust.
• Use general purpose grease on steel connection areas to
reduce the chance of corrosion.
• Avoid excessively cleaning steel components; it may
reduce the effectiveness of our protective coatings.
Textile deterioration
• Clean your hoop with a soft sponge only to avoid tearing
or cutting the material.
• Avoid using powerful soaps or detergents; they can
damage the hoop.
• Wipe dry any water used to clean the hoop with an
absorbent cloth; do not leave the hoop to dry in the sun.
WEATHER CARE
Cover or remove your Basketball Set when not in use.
Long-term exposure to the elements may fade the
material on the hoop.
Disassemble your Basketball Set and store
during inclement weather. The additional weight
on a trampoline’s Net Poles can increase the
chance of your Safety Net becoming damaged.
STORAGE
Store in a cool, dry place in the original packaging.
SAFETY WARNINGS FOR INSTALLATION
• Install using two (2) capable adults.
• Check that there are no overhead power lines within a 7
m (20 ft) radius of the Basketball Set.
• Assemble the system in accordance with these instructions
only.
• Exercise caution if using a ladder during assembly.
• Tighten all bolts securely.
• Ensure that the system is properly and completely
assembled before use.
Save these instructions in case you need to contact Vuly for
replacement parts.
Remember: Failure to follow these safety instructions may
result in injury or property damage, and will also void your
warranty.
SAFETY WARNINGS FOR USE
• Check and repair any loose components before each use.
• Check for any rusting before each use. Remove it, and
repaint with exterior enamel. If the rusting has penetrated
any steel component, replace it immediately.
• Do not use the system in severe weather.
• Maintain proper use and supervision to reduce the risk or
accident or injury.
• Exercise caution when playing with the system.
• Avoid climbing or playing on the system.
• Refrain from playing on damaged equipment at all times.
• Keep your face away from the backboard, hoop and net
during play (especially during ‘dunking’ activities).
• Keep hands and fingers away from moving parts.
• Remove jewellery before use; it may become tangled in
the net.
• Keep water, or other organic material, away from the
Basketball Set; it may cause the system to rust and fail.
The owner must ensure that all players know and follow
these rules to safely operate the Basketball Set.
ADULT SUPERVISION IS REQUIRED AT ALL TIMES WHILST EQUIPMENT IS IN USE.
VULY CARES ABOUT SAFETY.

4
PARTS
Pre-assembled Hoop and Backboard 1 1 1 1 1
Basketball 1 1 1 1 1
Pump 1 1 1 1 1
Upper Support Pole - - - 1 -
Lower Support Pole, with Bracket - - - 1 -
Long Bolt Elastic Ties - - - 2 -
Bolts - - - 4 -
Spanner - - - 1 -
Long Foam - - - 3 -
Short Foam (8ft and 10ft only require 1x) - - - 2 -
Adapter - 1 - - 1
D-ring - 1 - -
Replacement Lower Net Pole - - 1 - -
Accessory Extender - - - - 1
BASKETBALL SET | PARTS LIST

5
ASSEMBLY INSTRUCTIONS | FLARE
Insert the Lower Net Pole provided with your Basketball Set
Adaptor into the provided Upper Net Pole.
Choose a Net Pole on your trampoline where you want
install your Basketball Set.
Remove this original Net Pole.
Assemble your Basketball Set following
the instructions provided with that
accessory.
2
STEP 4 STEP
1
STEP 3 STEP
Attach your existing Net Pole plug to your new Net Pole.
Insert the new completed Net Pole into the T-Joiner on your
trampoline.
Remove original net pole
Assemble the two new net pole
Install the new shade cover pole
You have attached the Basketball Set
to your Flare trampoline.
CONGRATULATIONS!

6
Click the frame on the backboard into position.
1
STEP
Remove the cap on your chosen Upper Net Pole.
2
STEP
Insert the Basketball Set frame into the top of
the Upper Net Pole.
Ensure that all push buttons lock.
3
STEP
ASSEMBLY INSTRUCTIONS | LIFT, THUNDER AND VULY SERIES

7
CONGRATULATIONS!
You have attached the Basketball Set to your Lift, Thunder
or Vuly series trampoline
ASSEMBLY INSTRUCTIONS | LIFT, THUNDER AND VULY SERIES

8
ASSEMBLY INSTRUCTIONS | ULTRA SERIES
Unclip the U-Shackle from the chosen Upper Net Pole, and
remove the cap at the top.
Remove the U-Shackle from the stitched belt on the Safety Net,
and replace it with the D-Ring sold with your Basketball Set.
Note: Ensure that the Net Pole
is facing the correct way and
that the PP belt is not twisted.
A. Take the Adapter sold with your Basketball Set and
insert it into the top of the Upper Net Pole.
Note: Ensure that the holes on both the Adapter and the
Upper Net Pole align.
B. Insert the pin on the D-Ring
into the hole at the top of
the Upper Net Pole (and
Adapter), and secure it.
1
STEP
2
STEP
3
STEP

9
ASSEMBLY INSTRUCTIONS | ULTRA SERIES
A. Insert the Basketball Set into the Adapter at the top of
the Upper Net Pole.
Note: Ensure that the push button locks.
B. Reinsert the full Net Pole into the T-Joiner on your
trampoline.
You have attached the Basketball Set to your Ultra trampoline.
CONGRATULATIONS!
4
STEP

10
ASSEMBLY INSTRUCTIONS | CLASSIC
Push in the spring button on the net pole to remove the
net pole from your trampoline. Take off the elastic ties,
covers and foams from the net pole.
Note: If you have the original model Classic, you may
need to unscrew a bolt in the net pole before you can
remove it.
1
STEP
Separate the Upper Net Pole and the Lower Net Pole.
2
STEP
Lift up the Safety Pading from where you removed
the Safety Net pole. Push the lower support pole
through the Safety Padding hole.
3
STEP
Insert the Lower Net Pole through the Lower Support
Pole, and into the T-Joiner.
4
STEP

11
Insert each Bolt, from the front side, through both plates.
Fit the nuts loosely, and tighten each incrementally for
an even fit.
5
STEP
Slide on a Long Foam piece to cover the Lower Support
Pole.
Note: For 12 and 14 ft models, also slide on a Short
Foam piece.
6
STEP
Insert the Long Bolt Elastic Tie in the hole above the foam,
ensuring elastic loop is facing towards the Safety Net.
7
STEP
Join the Upper Support Pole to the Lower Support Pole.
8
STEP
ASSEMBLY INSTRUCTIONS | CLASSIC

12
ASSEMBLY INSTRUCTIONS | CLASSIC
Attach the Upper Net Pole. Insert the top foam and cover
from your net pole into the completed net pole.
9
STEP
Fix a Long Bolt Elastic Tie into the top hole.
10
STEP
Slide on a Short Foam piece and a cover.
11
STEP
Slide on a Long Foam piece and a cover.
12
STEP

13
Click the frame on the backboard into position.
Note: As it is not required for your model, remove the
spring button from the frame.
13
STEP
A-Remove the cap on your chosen net pole, and insert
the frame into the net pole.
B - Fix the Long Bolt Elastic Tie through the net pole.
Use a spanner to tighten the nut on the bolt.
C - Re-connect the elastic tie to the safety net.
14
STEP
ASSEMBLY INSTRUCTIONS | CLASSIC
You have attached the Basketball Set to your Classic trampoline.
CONGRATULATIONS!

14
THUNDER & VULY 2 HOOP | ASSEMBLY INSTRUCTIONSTIONS
Position the plate of the Accessory Extender on a Top
Joiner – ensuring that the holes on both line up.
1
STEP
Secure the Accessory Extender with
the four included nuts and bolts.
2
STEP
ASSEMBLY INSTRUCTIONS | 360 PRO
3
STEP
A. Click the Basketball Set frame into position.
B. Insert the Basketball Set frame into the Accessory
Extender – ensuring that the push buttons lock it
into place.
CONGRATULATIONS!
You have attached the Basketball Set to your 360 Pro.

15
THUNDER & VULY 2 HOOP | ASSEMBLY INSTRUCTIONSTIONS
Insert the Accessory Extender into the end of the H Joiner
on your Max. Secure with Frame Bolts.
1
STEP
Remove the cap on the Accessory Extender.
2
STEP
3
STEP
ASSEMBLY INSTRUCTIONS | MAX
A. Click the Basketball Set frame into position.
B. Insert the Basketball Set frame into the Accessory
Extender – ensuring that the push buttons lock it
into place.
CONGRATULATIONS!
You have attached the Basketball Set to your Max..
I
I
1 : 5
I
I
1 : 5
I
I
1 : 5
Step 2：take off the cap
I
I
1 : 10

vulyplay.com