Walker WP19MP4 User manual

COLOUR TELEVISION WITH REMOTE CONTROL
OPERATING INSTRUCTIONS
WP19MP4
䄰た坁䱋䕒彋䅐䅋弱〰㘶㜴㥟㔰ㄶ〷㠴
ㄵ⁁牡泽欠㈰〹⁓慬ﴠㄳ㨲㤺㔲

50160784
䄰た坁䱋䕒彋䅐䅋弱〰㘶㜴㥟㔰ㄶ〷㠴
ㄵ⁁牡泽欠㈰〹⁓慬ﴠㄳ㨲㤺㔲

English - 1 -
Contents
Features ................................................................. 2
Accessories............................................................ 2
Introduction............................................................. 2
Preparation............................................................. 2
Safety Precautions ................................................. 3
Power Source..................................................... 3
Power Cord......................................................... 3
Moisture and Water ............................................3
Cleaning.............................................................. 3
Heat and Flames ................................................ 3
Lightning............................................................. 3
Replacement Parts............................................. 3
Servicing............................................................. 3
Waste Disposal................................................... 3
Information for Users in European Union
Countries ............................................................ 3
Disconnecting the Device...................................3
Disconnecting the Device...................................3
Headphone Volume............................................ 4
Installation........................................................... 4
LCD Screen........................................................ 4
Warning .............................................................. 4
Overview of the Remote Control ............................ 5
LCD TV and Operating Buttons.............................. 6
Viewing the Connections- Back Connectors .......... 6
Viewing the Connections - Side Connectors..........7
Aerial Connection................................................... 7
Power Connection.................................................. 8
Using Side USB Input............................................. 8
USB Memory Connection...................................8
Connecting the LCD TV to a PC............................. 8
Connecting to a DVD Player................................... 8
Using Side AV Connectors..................................... 9
Using Other Connectors......................................... 9
Connecting Other Equipment via Scart..................9
Inserting Batteries in the Remote Control Handset 9
Switching the TV On/Off.........................................9
To Switch the TV On...........................................9
To Switch the TV Off......................................... 10
Input Selection...................................................... 10
Basic Operations.................................................. 10
Operation with the Buttons on the TV...............10
Operation with the Remote Control.................. 10
Initial Settings........................................................11
Electronic Programme Guide (EPG).................12
Programme Options.......................................... 12
Analogue Teletext............................................. 13
Widescreen....................................................... 13
Dijital TV Menu System........................................ 13
Channel List...................................................... 13
Navigating the Entire Channel List................... 13
Moving the channels in the channel list............13
Deleting the Channels in the Channel List .......13
Renaming channels.......................................... 14
Adding Locks to Channels................................14
Setting Favourites............................................. 14
Program Guide ................................................. 14
Timers............................................................... 14
Common Interface........................................... 15
TV Setup........................................................... 15
Setup ................................................................ 15
Configuration .................................................... 15
Time Settings(**)............................................... 16
Language Settings............................................ 17
Language Settings............................................ 18
Installation......................................................... 18
Video Playback (optional).................................20
ıAnalogue TV Menu System................................. 20
Picture Menu..................................................... 20
Sound Menu ..................................................... 21
Feature Menu ................................................... 22
Install Menu ...................................................... 23
Install Menu in AV Modes.................................24
Program Table .................................................. 24
Source Menu .................................................... 24
PC Mode Menu System........................................ 25
PC Position Menu.............................................25
Displaying TV Information .................................... 25
Mute Function....................................................... 25
Picture Mode Selection......................................... 26
Freezing Picture ................................................... 26
Zoom Modes......................................................... 26
Teletext................................................................. 26
Tips....................................................................... 27
Appendix A: PC Input Typical Display Modes.......28
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types).............................................. 28
Appendix D: Supported File Formats for
USB Mode............................................................ 29
Specifications ....................................................... 30
Digital Reception (DVB-T).................................... 30
Important Instruction............................................. 31
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 101_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 1 15.12.2009 13:25:5315.12.2009 13:25:53

English - 2 -
Features
• Remote controlled colour LCD TV.
•Fully integrated digitalTV (DVB-T- MPEG2)(DVB-T-
MPEG4).
• HDMI connectors for digital video and audio. This
connectionisalso designed toaccepthighdefinition
signals.
• USB input.
• 200 programmes from VHF, UHF(analogue).
• 500 programmes for digital mode (IDTV).
• Integrated tuner TNT HD, MPEG 2 / MPEG 4
compatible.
• OSD menu system.
• Scart socket for external devices (such as video,
video games, audio set, etc.).
• Stereo sound system.
• Teletext, fastext, TOP text.
• Headphone connection.
• Automatic programming system.
• Forward or backward manual tuning.
• Sleep timer.
• Child lock.
•Automatic sound mute when no transmission.
• NTSC playback.
• AVL (Automatic Volume Limiting).
•Whennovalid signal is detected, after5minutesthe
TV switches itself automatically to standby mode.
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98, ME, 2000, XP, Vista.
• Audio line out.
• Game Mode (optional)
Accessories
EXIT
/GUIDE
WIDE
ABC DEF GHI
JKL MNO PQR
STU VWX YZ
MP<P
TV DTV
iI-II
INFO
--
VP
++
-/--
PP 0
123
456
789
PC
OK
Remote
Controller
Batteries: 2 X AAA
Instruction Book
Introduction
Thank you for choosing this product. This manual will
guide youforthe proper operation of yourTV.
Before operating the TV, please read this
manual thoroughly.
Please do keep this manual in a safe place
for future references.
Preparation
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top
of the set.
Use this device in moderate climates.
10 cm
10 cm
10 cm
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 201_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 2 15.12.2009 13:25:5415.12.2009 13:25:54

English - 3 -
Safety Precautions
Please read the following recommended safety
precautions carefully for your safety.
Power Source
The TV set should be operated only from a 220-240
VAC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.
Power Cord
Do not place the set, a piece of furniture, etc. on the
powercord(mains lead) or pinchthecord.Handle the
power cord by the plug. Do not unplug the appliance
by pulling from the power cord and never touch the
powercordwith wet hands asthiscould cause a short
circuitorelectric shock. Nevermakeaknot in thecord
or tie it with other cords. The power cords should be
placed in such a way that they are not likely to be
stepped on.Adamaged power cord can cause fire or
give you an electric shock. When it is damaged and
needs to be replaced, it should be done by qualified
personnel.
Moisture and Water
Do not use this device in a humid
anddampplace (avoid the bathroom,
the sink in the kitchen, and near the
washingmachine). Donotexpose this
devicetorain or water, as this may be
dangerous and do not place objects
filled with liquids, such as flower
vases, on top. Avoid from dripping
or splashing.
Ifanysolid objectorliquid falls intothecabinet, unplug
the TV and have it checked by qualified personnel
before operating it any further.
Cleaning
Before cleaning, unplug the TV
set from the wall outlet. Do not
use liquid or aerosol cleaners.
Use soft and dry cloth.
Ventilation
The slots and openings on the TV
set are intended for ventilation and to ensure reliable
operation. To prevent overheating, these openings
must not be blocked or covered in anyway.
Heat and Flames
Thesetshould not beplacednear to
open flames and sources of intense
heat such as an electric heater.
Ensure that no open flame sources,
such as lighted candles, are placed
ontop of theTV. Batteries shouldnot
be exposed to excessive heat such
as sunshine, fire or the like.
Lightning
In case of storm and lightning or
whengoingon holiday, disconnectthe
power cord from the wall outlet.
Replacement Parts
Whenreplacementparts are required, makesurethat
the service technician has used replacement parts,
which are specified by the manufacturer or have the
samespecificationsas the originalone.Unauthorized
substitutions may result in fire, electrical shock or
other hazards.
Servicing
Please refer all servicing to qualified
personnel. Do not remove the cover
yourself as this may result in an
electric shock.
Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable and
shouldprincipallybe recycled. Packaging materials,
such as foil bag, must be kept away from children.
• Batteries, including those which are heavy metal-
free, should not be disposed of with household
waste. Please dispose of used battery in an
environment friendly manner. Find out about the
legal regulations which apply in your area.
• Cold cathode fluorescent lamp in LCD PANEL
contains a small amount of mercury; please follow
the local laws or regulations for disposal.
Information for Users in European
Union Countries
Thissymbolon the productoron its packaging means
that your electrical and electronic device should
be disposed at the end of its service
life separately from your household
wastes. There are separate collection
systems for recycling in EU.
For more information, please contact
the local authority or the dealer where
you purchased the product.
Disconnecting the Device
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
Disconnecting the Device
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 301_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 3 15.12.2009 13:25:5515.12.2009 13:25:55

English - 4 -
Headphone Volume
Excessive sound pressure from
earphones and headphones can
cause hearing loss.
Installation
To prevent injury, this device must be
securely attached to the wall in accordance with the
installation instructions when mounted to the wall (if
the option is available).
LCD Screen
TheLCDpanelis a very high technology product with
about a million thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed blue, green or
red point. Please note that this does not affect the
performance of your product.
Warning
Do not leave your TV in standby or operating mode
when you leave your house.
When you use the wall mount kit (optional) with
the LCD TV, we would definitely recommend to
plug all your cables into the back of the LCD
before mounting to the wall.
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 401_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 4 15.12.2009 13:25:5515.12.2009 13:25:55

English - 5 -
Overview of the Remote Control
Standby1. Yellow (2. Current language (in DTV mode)
(*) / Feature menu)
Blue (Favourite mode (in DTV mode) (*) /3. Install menu)
Previous programme / Swap4. Cursor up5. Cursor right6. Cursor down7. TV / Digital TV8. Mono/Stereo - Dual I-II9. Programme up/down10.Numeric buttons11. Exit (in DTV mode)12.Hold (in TXT mode) /13.Update (in TXT mode)14.Index page (in TXT mode) / Electronic15.Programme Guide (EPG) (in DTV mode)
Reveal (in TXT mode) / Switch from TV to16.PC
Green (Picture menu / Page down /17.Subtitle onoff (in DTV mode) (*)
Red (Sound menu / Page up /18. Channel list
mode selection
Menu on/off19.Ok - Confirm /20. Channel list (in DTV mode)
Cursor Left21.AV / Source22.Info23.Volume up/down24.Mute25.Picture mode selection26.Time / Subpage (in TXT mode) / Subtitle27.on-off (**)
Teletext on-off28.Mix (in TXT mode)29.Expand (in TXT mode) / Image size30.
(*) available for EU countries.
(**) available for UK country option.
EXIT
/GUIDE
WIDE
ABC DEF GHI
JKL MNO PQR
STU VWX YZ
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
MP<P
TV DTV
iI-II
INFO
--
VP
++
-/--
PP 0
123
456
789
PC
OK
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 501_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 5 15.12.2009 13:25:5615.12.2009 13:25:56

English - 6 -
LCD TV and Operating Buttons
Standby button1. TV/AV button2. Programme Up/Down buttons3. Volume Up/Down buttons4.
Note: Press “” / “ ”
buttons at the same time to view
main menu.
Viewing the Connections- Back Connectors
SCART socket1. inputs or outputs for external devices.
Connect the SCART cable between SCART socket on TV and SCART socket on your external device
(such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch toAV
mode.
Component Video Inputs (YpBPr)2. are used for connecting component video.
You can connect the component video and audio sockets with a device that has component output.
Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and
the component video outputs of your device. While connecting, be sure that the letters on your TV, “Y”,
“Pb”, “Pr” correspond with your device’s connectors.
PC/YPbPr Audio Inputs3. are used for connecting audio signals of a PC or a device that connects to the
TV via YPbPr.
Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of your PC to
enable PC audio.
Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device to
enable component audio.
/VTV A
MENU
P\CH
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 601_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 6 15.12.2009 13:25:5615.12.2009 13:25:56

English - 7 -
S/PDIF Out4. outputs digital audio signals of the currently watched source.
Use an S/PDIF coaxial cable to transfer audio signals to a device that has S/PDIF input. You should
also set SPDIF Out option in the Sound Menu as On.
RF Input5. connects to an antenna or a cable.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the
device to the television with an appropriate antenna cable, as shown in the illustrationin the following
pages.
Audio Line Outs6. output audio signals to an external device such as an optional sound system.
To connect the external speakers to your TV, use AUDIO LINE OUTS of the TV with an audio cable.
Note: Line out feature cannot be used while in HDMI source. You can use SPDIF instead.
PC Input7. is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
HDMI 1:8. HDMI input
HDMI Inputs are for connecting a device that has an HDMI socket.
Your LCD Television is capable of displaying High Definition pictures from devices such as a High
Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets
or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i, 1080p
signals. No sound connection is needed for an HDMI to HDMI connection.
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe1. to. For more information, see “Conditional Access” section.
USB Input2. (functional in DTV mode only)
Headphone jack is used for connecting an external headphone to the system.3. Connect to the HEADPHONE jack to listen to the TV from headphones
(optional).
Video Input is used for connecting video signals of external devices.Connect the4. video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack
on your device.
Audio Inputs are used for connecting audio signals of external devices. Connect5. the audio cable between the AUDIO INPUTS on the TV and the AUDIO
OUTPUT jacks on your device.
Note: If you connect a device to the TV via the VIDEO INPUT, you should also
connect your device with an audio cable to the AUDIO INPUTS of the TV to
enable audio.
Aerial Connection
• Connect the aerial or cable TV plug to theAERIAL INPUT socket located at the rear of the TV.
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 701_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 7 15.12.2009 13:25:5715.12.2009 13:25:57

English - 8 -
Power Connection
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the
ambient room temperature before you connect the
set to the mains.
• Plug the power cable to the mains socket outlet.
Using Side USB Input
• You can connect USB devices to your TV by using
the USB input of the TV. This feature allows you to
display/play JPG, video (optional) and MP3 files
stored in a USB stick.
• It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
• You may back up your files before making any
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any file damage or data loss.
• Do not pull out USB module while playing a file.
CAUTION: Quickly plugging and unplugging USB
devices, is a veryhazardous operation. Especially,
do not repeatedly quickly plug and unplug the
drive. This may causephysical damage tothe USB
player and especially the USB device itself.
SIDE VIEW USB MEMORY
USB Memory Connection
• Plug your USB device to the USB input of the TV.
IMPORTANT: The TV supports only FAT32 disk
formatting. NTFS format is not supported.
Connecting the LCD TV to a PC
For displaying your computer’s screen image on
your LCD TV, you can connect your computer to the
TV set.
• Power off both computer and display before making
any connections.
• Use 15-pin D-sub display cable to connect a PC to
the LCD TV.
• When the connection is made, switch to PC source.
See “Input selection” section.
•Settheresolutionthatsuitsyourviewingrequirements.
Resolutioninformationcan be foundintheappendix
parts.
PC audio cable
(not supplied)
to AUDIO INPUTS
on the TV
PC RGB cable
(not supplied)
to PC input
Audio
Inputs
PC Input
Connecting to a DVD Player
If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player’s instruction book for additional
information. Power off both the TV and the device
before making any connections.
Note: Cables shown in the illustration are not
supplied.
• If your DVD player has an HDMI socket, you can
connectviaHDMI. Whenyouconnectto DVDplayer
as illustrated below, switch to HDMI source. See,
“Input Selection” section.
• Most DVD players are connected through
COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio,
use a component audio cable as illustrated below.
When the connection is made, switch to YPbPr
source. See, “Input selection” section.
• You may also connect through the SCART socket.
Use a SCART cable as shown below.
Note:Thesethree methods ofconnectionperform the
same function but in different levels of quality. It is not
necessary to connect by all three methods.
HDMI
input
Scart socket
Component
video
inputs
Component
audio
inputs
DVD Player
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 801_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 8 15.12.2009 13:25:5815.12.2009 13:25:58

English - 9 -
Using Side AV Connectors
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
• For connecting a camcorder, connect to the VIDEO
IN socket and theAUDIO SOCKETS. For selecting
the related source, see the section “Input selection”
in the following parts.
• To listen the TV sound from headphones, connect
to the HEADPHONE jack of theTV.
Camcorder
Headphone
Using Other Connectors
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
• To connect external speakers, use an audio cable.
Donotreverse theAUDIO LEFTandAUDIORIGHT
jacks.Turnon the LCD TV andexternalspeakerset
afterall connectionsaremade. Refertoyourspeaker
set’s manual for further queries.
•Forconnecting atoa device thathasSPDIF support,
use an appropriate SPDIF cable to enable sound
connection. You should also set SPDIF Out option
in the Sound menu as On.
External Speakers
A device that
supports
SPDIF signal.
Connecting Other Equipment via
Scart
Most devices support SCART connection. You can
connect a; DVD recorder, a VCR or a decoder to your
LCDTV by using theSCARTsocket.Notethat cables
shown in the illustration are not supplied.
Power off both theTV and the devices before making
any connections.
For more information, refer to your device’s own
instruction book.
Scart socket
Decoder
DVD Recorder Video Recorder
Inserting Batteries in the Remote
Control Handset
• Remove the battery cover located on the back of
the handset by gently pulling backwards from the
indicated part.
• Insert two AAA/R3 or equivalent type batteries
inside.Placethebatteries in the right directions and
replace the battery cover.
+
Note: Remove the battery from remote control
handset when it is not to be used for a long period.
Otherwise it can be damaged due to any leakage of
batteries.
Remote range is approximately 7m/23ft.
Switching the TV On/Off
To Switch the TV On
• Connect the power cord to the 220-240V AC 50
Hz.
• Press STANDBY switch. Then the standby LED
lights up.
• To switch on the TV from standby mode either:
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 901_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 9 15.12.2009 13:25:5815.12.2009 13:25:58

English - 10 -
• Press the “ ” button, P+ / P- or a numeric button
on the remote control.
• Press the -P/CH or P/CH+ button on the TV. TheTV
will then switch on.
Note: If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the
TV set, the programme that you were watching last
will be reselected.
By either method the TV will switch on.
To Switch the TV Off
• Press the “ ” button on the remote control or
press the STANDBY switch, so the TV will switch
to standby mode.
• To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources.
• Press button on your remote control for directly
changing sources.
or,
• Select “Source” option from the main menu
by using “ ” or “ ” button. Use then “ ” or
“”buttonto highlight an input andpress“ ”button
to select.
Note: You can mark desired source options by
pressing the OK button. Therefore, when button
is pressed, only the marked source options will be
available (except for the TV source).
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
•Press“ ”button to decrease volume or
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
•Press“P/CH+”buttontoselectthenextprogrammeor
“P/CH -” button to select the previous programme.
Viewing Main Menu
• Press “” / “ ”buttons at the same time
to view main menu. In the Main menu select sub-
menu using “P/CH -” or “P/CH +” buttons and enter
the sub-menu using “ ” or “ ” buttons.
To learn the usage of the menus, refer to the menu
system sections.
AV Mode
• Press the “TV/AV” button in the control panel on the
TV to switch between AV modes.
Operation with the Remote Control
• The remote control of yourTV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
• Functions of the menu system are described in the
following sections.
Volume Setting
• Press V+ button to increase the volume. Press V-
buttontodecrease the volume.Avolumelevel scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press “P -” button to select the previous
programme.
• Press “P +” button to select the next programme.
Programme Selection (Direct Access)
•Press numericbuttonson theremotecontrol toselect
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between10 -499 (forIDTV) or10-199 (foranalogue),
press the numeric buttons consecutively. The limit
of the delay time is 3 seconds.
• Press directly the programme number to reselect
single digit programmes.
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 1001_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 10 15.12.2009 13:26:0015.12.2009 13:26:00

English - 11 -
Initial Settings
When the TV is turned on for the first time, the menu
forthelanguage selection appearsonthe screen.The
message “Welcome please select your language!”
is displayed in all language options sequentially in
the OSD.
Bypressingthe“ ”or“ ”buttonshighlightthelanguage
you want to set and press OK button.
You can get information about the menu usage by
pressing INFO button. Press INFO button again to
exit the help menu.
After then, “First time installation” OSD will appear
on the screen. By pressing “ ” or “ ” buttons, select
the country you want to set and press OK button.
Note: Country selection will not be available for UK.
Press OK to continue.
Afterthen,theactive antenna selection OSD appears
on the screen:
By pressing “ ” or “ ” buttons, set active antenna
mode as on or off.
If an active antenna is connected to your TV, you can
select this option as On. Antenna power should be
“Off” when standard antenna is used instead of the
active antenna. See “Configuration Menu” in the
following sections for more information.
Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
• To select the “Yes” or “No” option, highlight the item
by using “ ” or “ ” buttons and press OK button.
The IDTV will automatically tune to the transmission
channels,searchingfordigitalterrestrialTVbroadcasts
and displaying the names of channels found. This
process will take a few minutes. To cancel searching,
you can press Mbutton at any time during the
process. The following OSD will be displayed during
the automatic search:
After Automatic Search is completed, the following
message will be displayed, asking for sorting option.
If you select “YES”, programme list will be sorted
according to LCN (logical channel number). Select
“NO” for using frequency sort. (This feature is
available for only Germany,Austria and Italy country
option)
After this operation, the following menu will appear
on the screen, asking for analog channel search:
To search for analogue channels, select “Yes”. TV
switches to the analogue TV mode. A menu will be
displayed to search for analogue channels.
Set Language item by pressing “ ” or “ ” button.
Press“ ”or “ ” button tohighlightCountry item and
then use “ ” or “ ” to set. Press “ ” or “ ” button to
highlightTXT. Language.SetTXT Languagebyusing
“” or “ ” button. To cancel, press the BLUE button.
When finished, press OK or RED button to continue
and the following OSD will be displayed:
After automatic tuning is finalized, a programme list
will appear on the screen. In the programme list you
willsee the programmenumbersand namesassigned
to the programmes.
If you do not accept the locations and/or the names
oftheprogrammes,you can change them inProgram
table. For details, see the section, “Program table”.
General Operation
Pressing the TV/DTV button at any time while
watching television programmes will switch the TV
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 1101_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 11 15.12.2009 13:26:0015.12.2009 13:26:00

English - 12 -
set to the digital terrestrial television broadcasting.
Information Banner
• Whenever you change the channel using the P + or
P - button or numeric buttons, the TV displays the
broadcast picture along with an information banner
at the bottom of the screen. This will remain on the
screen for approximately a few seconds.
• The information banner can also be displayed by
pressingtheINFO button at any timewhilewatching
the TV. Pressing INFO button again removes the
banner.
If the selected channel is locked, you must enter
the correct four digit key to view the channel. In this
case, a dialog box asking for the lock key will be
displayed:
Electronic Programme Guide (EPG)
Some, but not all, channels send information about
the current and next events. Please note that event
information is updated automatically. If there are no
event information data available for channels,EPG
will be displayed with blanks.
• Press GUIDE button to view the EPG menu.
• Press “ ” or “ ” buttons to navigate through
channels.
• Press “ ” or “ ” buttons to navigate through the
programme list.
RED button (Shrink): makes the info boxes
smaller.
GREEN button (Expand): makes the info boxes
larger.
YELLOW button (Prev. Day): displays the
programmes of previous day.
BLUE button (Next day): displays the programmes
of the next day.
INFO (Details): displays the programmes in detail.
OK (View / Timer): shows the highlighted channel /
sets the reminder for future programmes.
Numeric buttons (Jump): go to preferred channel
directly via numeric buttons.
P<P: Jump to current broadcast.
0 (SEARCH): activates “Guide Search” window
Press “0” button to view Guide Search menu. Using
this feature, you can search the programme guide
database in accordance with the genre selected or
with name match.
Programme Options
In EPG menu, press the OK button to enter the
“Programme Options” menu.
Using this option, you can switch to the selected
channel.
Over Air Download
To ensure that your IDTV always has the most up-
to-date information, please ensure that, after use,
it is set to standby mode. At 3 A.M. each day, the
IDTV automatically searches for any updates which
may be broadcast and will download this to your
IDTV automatically. This operation will normally take
approximately 30 minutes.
Displaying Subtitles
With digital terrestrial broadcasting (DVB-T), some
programmes are broadcast with subtitles.
Note: You can enable subtitles by pressing the
(For UK**) or GREEN (for EU*) button.
Digital Teletext (For UK only**)
• Press the TELETEXT ( ) button.
• The digital teletext information appears.
• Operate it with the coloured buttons, /// buttons and
OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on digital teletext
screen.
• When “Press “SELECT” button or similar message
appears on the screen, press the OK button.
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 1201_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 12 15.12.2009 13:26:0115.12.2009 13:26:01

English - 13 -
• When the TELETEXT ( ) button is pressed, the
TV returns to television broadcasting.
• With digital terrestrial broadcasting (DVB-T), in
additiontodigital teletext broadcastingtogetherwith
the normal broadcasting, there are also channels
with just digital teletext broadcasting.
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
• When you press the TELETEXT ( ) button again,
the digital teletext screen will be displayed.
Analogue Teletext
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
“TELETEXT” explanations.
Widescreen
Depending on the type of the broadcast being
transmitted, programmes can be viewed in a number
of formats. Press the WIDE button repeatedly to
change screen format.
WhenAuto is selected, the format being displayed is
determined by the picture being broadcast.
PLEASE NOTE: Menu size changes depending on
the chosen image size.
Dijital TV Menu System
• Press Mbutton and DTV main menu will be
displayed.
Channel List
Using “ ” or “ ” buttons on the remote control in
main menu, make sure that the first item, Channel
List, is highlighted and press the OK button to display
the Channel List.
You can use following buttons for Move, Delete and
Lock functions.
• Channel List is the place where the channels are
managed.
YELLOW: Tags/untags the selected channel.
BLUE: Tags/untags all channels.
Navigating the Entire Channel List
• Press “ ” or “ ” keys for selecting the previous or
next channel.
• You can press or buttons to move page up or
page down.
• To watch a specific channel, highlight it using “ ”
or “ ” buttons and then press OK button, while the
“Select” item on Channel List menu is highlighted
via “ ” or “ ” buttons.
Moving the channels in the channel
list
• Press “ ” or “ ” buttons to select the channel that
will be moved.
• Press “ ” or “ ” buttons to select the ‘’Move’’ item
on Channel List menu and press OK to confirm.
Note:If you enter the same programme number of
the channel that you want to move, “....services will
be replaced. Do you want to continue?” OSD will
be displayed. Press OK to confirm or select “No”
to cancel.
Note: The following screen will be displayed when
want to move or delete channels that are sorted by
LCN (logical channel number) service.
Select “YES” to continue. Select “NO” to cancel
(LCN feature is available for only Germany, Austria,
Switzerland and Italy country options).
Deleting the Channels in the Channel
List
• Press “ ” or “ ” buttons to select the channel that
will be deleted.
• Press “ ” or “ ” buttons to select the “Delete’’item
on Channel List OSD.
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 1301_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 13 15.12.2009 13:26:0215.12.2009 13:26:02

English - 14 -
Press “OK’ button to delete the highlighted channel
in the channel list. Then the message below appears
on the screen.
Renaming channels
To rename a specific channel, the channel must be
highlighted via pressing “ ” or “ ” buttons and then
highlight the “Edit Name” item by pressing “ ” or “
” buttons. Press “OK” button to activate rename
feature.
Nowpressing “ ”or“ ” buttonsmovesto theprevious/
next character. Pressing “ ” or “ ” buttons toggles the
currentcharacter,i.e.,‘b’characterbecomes‘a’on and
‘c’on.Pressingthenumericbuttons‘0...9’ replacesthe
highlighted character with the characters printed above
the key one by one as the button is pressed.
Press the Mbutton to cancel the editing or OK button
to save the new name.
Adding Locks to Channels
Channel Locking provides a password-protected
access to channels selected by parents.
In order to lock a channel you should know the
Parental Lock password (default value is set to
0000 in the factory and can only be changed from the
Configuration menu).
By pressing “ ” or “ ” buttons, highlight the channel
tobelocked and select the“Lock” optionby pressing
“” or “ ” buttons. Then press the OK button and a
password box is displayed:
Setting Favourites
Tosetafavouriteyoushouldhighlightthe“Favourites”
item at the bottom of the Channel List menu. Then
press OK button and Edit Favourite List menu
appears on the screen.
Adding a Channel to a Favourites List
By pressing “ ” or “ ” buttons, highlight the channel
that you want to add to the favourite list. By pressing
OK button, the highlighted channel is added to
FavouriteList.Ficon indicatesthata channel isadded
to Favourite List.
Removing a Channel from a Favourite List
•Highlightthechannelthatyouwanttoremove fromthe
favourite list and press OK button to remove.You can
press OK button again to re-adding a channel.
•To activate Favourites,gotothe Configuration menu
and select Favourite mode. Use “ ” or “ ” to set
Favourite mode as on. To cancel Favourites, set
Favourite Mode to Off.
Hint: Pressing INFO button can help you for
displaying information in IDTV.
Program Guide
This section is same with the instructions given in
the General Operations page. Please see Electronic
Programme Guide (EPG) section in the General
Operations part.
Timers
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 1401_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 14 15.12.2009 13:26:0315.12.2009 13:26:03

English - 15 -
To display timers window, press either TIME button
on the remote control or activate the item from the
main menu. To add a timer, press the YELLOW
button on the remote control. Then “Add Timer”
window appears.
Channel: “ ” or “ ” keys will navigate the user
through the TV or Radio list.
Date: Starting date is entered via the Left/Right or
the numeric buttons.
Start: Starting time is entered via the Left/Right or
the numeric buttons.
End: Ending time is entered via the Left/Right or the
numeric buttons.
Duration: Displays the duration of the recording.
Durationitemwillbe automatically displayed after the
starting and ending times are entered.
Change/Delete:permitsorprohibitsanymodifications
for other users.
You cansave theadjustmentsby pressingtheGREEN
keyorcancel theprocessby pressing theRED button.
You can edit the list via GREEN key and delete with
the RED button.
Common Interface
Press Mbutton to display the main menu and use
the “ ” or “ ” buttons to highlight the “Common
Interface” line and press OK button.
It is required to subscribe to a pay channel company
to view the pay channels of the Digital Terrestrial
broadcasting.
Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the Television using
the following procedure.
• Switch off the TV and unplug from the mains.
• Insert the CAM, and then the viewing card to the
slot.
•TheCAMshould becorrectly inserted,itis impossible
toinsert fully ifreversed.TheCAMor theTV terminal
may be damaged if the CAM is forcefully inserted.
• Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
• Some CAMs may require the following set up.
Please set the CAM by entering the DIGITAL TV
menu, Common Interface then pressing OK button.
(CAM set up menu is not displayed when it is not
required.)
•To see the viewing contract information:
• Enter DIGITAL TV; press Mbutton, then highlight
Common Interface and press OK button.
• When no module is inserted, “No Common
Interface module detected” message appears on
the screen.
• Refer to the module instruction manual for details
of the settings.
NOTE: Insert or remove the CI module only when the
TV is in STANDBY mode or SWITCHED OFF.
TV Setup
You can use this item to display the TV functions.
The digital TV Setup menu screen is accessed from
themainmenu. PresstheMbutton to displaythemain
menu and use or buttons to highlight “TV Setup”.
Press OK button to display TV Setup menu screen.
You can find detailed information for all menu items
in “Analogue TV Menu System” section.
Setup
The adjustments in this menu are given as the
following:
Configuration
You can configure the settings of your TV. Select
Configuration from Setup menu and press OK to
view this menu. Press the EXIT button on the remote
control to exit.
Favourite Mode
Usethisfunctiontoenableordisable favourite mode.
Press “ ” or “ ” button to set this function as on or
off.
Scan Encrypted
Scan Encrypted Channel feature will always be ON
after performing first time installation. When this
settingison,search process will locate the encrypted
channelsas well.IfitissetasOFFmanually,encrypted
channelswillnot be located while inautomaticsearch
or manual search. Use “ ” or “ ” button to select
Scan Encrypted and then press “ ” or “ ” button to
set this setting as On or Off.
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 1501_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 15 15.12.2009 13:26:0315.12.2009 13:26:03

English - 16 -
Parental Control
•Somechannels broadcast material whichyoudo not
want younger members of the family to watch. Any
channelcanbe ‘locked’so that it cannot beselected
for viewing unless a four-digit PIN code is entered.
In this way any channel not suitable for younger
viewers can be prohibited.
•Thisfunctionenables ordisablesthe menuprotection
system and allows the PIN code to be changed.
•Use“ ” or “ ” buttons tohighlightParentalControl.
Press OK button to enter Parental Control menu. A
dialog box asking for the lock key is displayed:
There is only one key which is set to “0000” initially.
Enter lock key. If wrong lock key is entered, the
“WRONG PIN” message will be displayed on the
screenandthe TVreturnsto the previous menu. Ifthe
PIN is correct, the Parental Control menu including
following items will be displayed:
Maturity Lock (**)
(**) If you set Country option as UK in the first time
installation, Maturity Lock option will not be vsible.
When set, this option gets the maturity information
fromthe broadcastandif thismaturitylevel isdisabled,
the TV will not display the related video-audio.
Menu Lock
Use “ ” or “ ” buttons to set Menu Lock. Here, you
can set/reset locking function for the main menu or
the installation menu to restrict access. If the menu
lock is disabled, there will be free access to the menu
system.
Disabled: All menus are unlocked.
All Menus: All menus are accessible only with the
correct lock key. So the user cannot add, delete,
rename or move the channels and cannot set the
timers.
Installation Menu: Installationmenuis locked, so the
user cannot add channels. Changes will be updated
after exiting Configuration Menu.
Set PIN
Use “ ” or “ ” buttons to go to “Set PIN” option.
Press OK to display the “Set PIN” window. Use
numericbuttons to enternew pin numberyou will need
to input your new pin a second time for verification
purposes. The factory default pin number is 0000, if
you change the pin number make sure you write it
down and keep it safe.
Time Settings(**)
(**): Time setting will not be available for UK.
Intheconfigurationmenu, highlight theTime Settings
item by pressing “ ” or “ ” buttons. Press OK and
Time Settings sub menu will be displayed on the
screen:
Use “ ” or “ ” buttons to highlight the Time Zone
Setting. Time Zone Setting is set using “ ” or “ ”
buttons. It can be set to AUTO or MANUAL. When
AUTO is selected, Current Time and Time Zone
options will not be available to be set.
If MANUAL option is selected as the Time Zone
Setting, Time Zone can be altered:
• By pressing “ ” or “ ” buttons select Time Zone.
Use “ ” or “ ” buttons to change the Time Zone
between GMT-12 or GMT+12. Current Time on the
top of the menu list will then change according to
the selected Time Zone.
Receiver Upgrade
Over Air Download (OAD)
Toensurethat yourTV always hasthemost up todate
information,use thissetting.Please ensurethattheTV
is set to standby mode. The TV automatically
powers up at 3.00 A.M. each day and searches for
any new information which may be broadcast and
will download this to your receiver automatically. This
operationwill normally takeapproximately 30 minutes.
Ifyouhavean important recording to be carriedoutat
3.00 A.M. and you do not want to interrupt it, disable
auto OAD search by performing the following:
• Press Mbutton and using the “ ” or “ ” buttons to
choose Setup and press OK button.
• Highlight Configuration menu with “ ” or “ ” keys
and press OK.
• Use “ ” or “ ” buttons to choose “RECEIVER
UPGRADE” and press OK button.
• Using the “ ” or “ ” button change “Automatic
scanning” from Enabled to Disabled.
• Highlight “Scan for upgrade” menu with “ ” or “
”keys and pres OK to commence upgrade.
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 1601_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 16 15.12.2009 13:26:0415.12.2009 13:26:04

English - 17 -
•Afterthe searchprogressis completed, themessage
“Completed searchingforupgrade. Nonewsoftware
wasfound” appears onthescreen ifnonew software
is found.
Dolby Digital
In the Configuration Menu, highlight the Dolby D item
by pressing “ ” or “ ” buttons. Use the “ ” or “ ”
buttons to set the Dolby Digital as On or Off. If the
channel that you are watching supports Dolby Digital
and Dolby Digital Plus, you can turn this setting on.
Hard of Hearing (*)
Use “ ” or “ ” button to select Hard of Hearing and
then press “ ” or “ ” button to set this setting as
On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
(*) Hard of Hearing function will not be available for UK.
Channel List
Use “ ” or “ ” buttons to go to Channel List option.
Use or buttons to toggle Channel List Mode. If you
select “TV Only”, with the “ ” or “ ” buttons, you
navigate through only TV channels. If you select
“Radio Only”, with the “ ” or “ ” buttons, you
navigate through only radio channels. If you select
“Text Only”,withthe“ ”or“ ”buttons,younavigate
through only text channels. If you choose “Show All”
all channels can be navigated. To save the recent
changes and exit; press the Mbutton.
Digital Audio Out
Use this setting to define digital audio out signal type.
Use “ ” or “ ” buttons to set Digital audio out as
AC3 or PCM.
If your selected channel includesAC3 sound stream,
you should connect your TV to external equipment
by using Spdif out of your TV for enabling the sound
output.If you have no external sound equipment,
please select Digital Audio Out as “PCM” by using “
” or “ ” button.
A/V Delay
You can use this setting when there is an AV
synchronization problem in the received broadcast.
Press “ ” or “ ” button to change the delay.
Audio Description (Optional)
Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media.You canusethis feature,onlyif thebroadcaster
supports that additional narration track. Use “ ” or
“” buttons to select an item. Then use “ ” or “ ”
buttons to set.
Audio Description (Optional)
Thisfunction enables ordisablesthe audiodescription
feature by pressing the “ ” or “ ”buttons.
Preferred Language (Optional)
Bypressingthe “ ”or“ ” buttons thepreferredaudio
description language is being changed. This setting
can be used, only if it is available.
Relative Volume (Optional)
Using this option, theAudio Description volume level
can be increased or decrased relatively, according to
the general volume.
Standby Search (*)
(*)This setting is visible onlywhentheCountry option
is set to Denmark, Sweden, Norway or Finland.
Use “ ” or “ ” button to select Standby Search and
thenpress“ ” or“ ”button to setthissetting as Onor
Off.If you changeStandbySearchto Off,thisfunction
will be unavailable.
To use Standby search please make sure that
you select Standby Search as On.
Active Antenna (*)
Use “ ” or “ ” buttons to highlight Active Antenna
option. When antenna power option is set as On by
pressing “ ” or “ ” button, +5V will be transmitted to
the antenna output.This feature enables the use of
active antenna.
Note: Antenna power should be “Off” when standard
antenna is used instead of the active antenna.
Language Settings
Inthismenutheusercanadjust thepreferred language.
Select “Language” item in the Setup menu and press
OK button. Then language settings menu will be
displayed.
You can set the desired language options by using “ ” /“
”and “ ”/“ ” buttons.
Note:If theCountryoption issetto Denmark,Sweden,
Norway or Finland, the Language Settings menu will
function as described below:
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 1701_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 17 15.12.2009 13:26:0515.12.2009 13:26:05

English - 18 -
Language Settings
.
Use “ ” or “ ” buttons to highlight the menu item
that will be adjusted and then press “ ” or “ ” button
to set.
•AudioLanguage is usedforselecting the soundtrack
of a channels. Primary settings are the first priority
whenmultiplechoicesare available on a broadcast.
Secondary settings are the alternatives when the
first options are not available.
• Guide Language: If the received EPG data includes
the selected guide language, EPG data language
will be changed accordingly.
•Teletext language sets the desired teletext
language.
Media Subtitle: In order to display subtitles properly,
use this setting to select a movie subtitle language.
By pressing “ ” or “ ” button, select the desired
language option.
Installation
The Installation menu is mainly intended to help you
for creating a Channel Table in most efficient way.
Select Installation from the main menu by pressing “
” or “ ” buttons.
Automatic Channel Scan
Automatic channel scan is started by pressing
OK button while Automatic channel scan item is
highlighted.
The following message appears on the screen:
Highlight Yes or No by using “ ” or “ ” buttons and
press OK button to confirm.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
Highlight Yes and press OK button to search for
analogue channels. The following menu appears on
the screen for analogue channel search:
Set Language item by pressing “ ” or “ ” button.
Press “ ” or “ ” button to highlight Country item and
then use “ ” or “ ” to set. Press “ ” or “ ” button to
highlightTXT Language. Select aregionbyusing“ ”
or“ ” button. Whenfinished,press OKorRED button
to continue. To cancel, press the BLUE button.
AfterAPS isfinalized,theprogrammetable willappear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
Manual Search
InManualSearch, thenumberof themultiplexis entered
manually and only that multiplex is searched for the
channels. For every valid channel number, signal level
and signal quality are shown on the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
Frequency Search
Enterthedesired frequency. Whenfinished,press OK
button, and the TV wili start frequency search.
Clear Service List (*)
(*)Thissettingis visible only when the Countryoption
is set to Denmark, Sweden, Norway or Finland.
01_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 1801_MB37_[GB]_19880W_1205UK_IDTV_BRONZE13_10066749_50160784.indd 18 15.12.2009 13:26:0515.12.2009 13:26:05