Wasp Barcode Technologies DR6 User manual

DR6Rugged Handheld Computer
User's Manual
Version 1.0

Table of Contents
Chapter 1 - Overview................................................................................1
1.1 Package ................................................................................................. 1
1.2 Product Detail ......................................................................................... 2
1.3 Specifications ......................................................................................... 4
1.4 Getting Started ....................................................................................... 7
Chapter 2 –Installation & Operation ................................................14
2.1 Barcode Setting .................................................................................... 14
2.2 HF Setting ............................................................................................ 18
2.3 WWAN Setting...................................................................................... 21
2.4 WLAN Setting ....................................................................................... 24
2.5 PAN Setting .......................................................................................... 32
2.6 GPS Setting .......................................................................................... 34
2.7 PC Setting ............................................................................................ 35
2.8 Camera Setting .................................................................................... 37
2.9 USS Camera ....................................................................................... 41
2.10Performing a Hardware Reset ............................................................. 46
2.11 Performing Factory data reset ............................................................ 47
2.12 KeyRemap .......................................................................................... 48
2.13 Split Screen ........................................................................................ 51
2.14 Network Time Protocol (NTP) Server ................................................. 53
Chapter 3 –Introduction to Applications.........................................55
3.1 USS (scan service)............................................................................... 55
3.2 Enterprise Keyboard ............................................................................. 60
3.3 Logger .................................................................................................. 61
3.4 Software Update ................................................................................... 63
3.5 StageGO............................................................................................... 65

1
Chapter 1 - Overview
1.1 Package
Please make sure the following contents are in the DR6gift box.
If something is missing or damaged, please contact your Wasp
representative.
The basic package contents
DR6Rugged Handheld Computer
Battery
Hand Strap
USB Type-C Cable
Quick Start Guide
Optional accessories
USB 3.0 Type-C cable
Fast charge adaptor
9H glass screen protector
1 Slot USB cradle
1 Slot Charging cradle
1 Slot Ethernet cradle
Multi-Slot Terminal Charging / Ethernet Cradle / Battery Charger
Standard/UHF pistol grip
Stylus with Coiled strap

2
1.2 Product Detail
DR6 Product View
Top View
1. Barcode Scanner Window
2. Receiver
3. LED Indicator
4. Front Camera
5. Volume Key
Front View
Left View
Right View
6. Scanner Trigger Key
7. Power Key
8. Programmable Key
9. Scanner Trigger Key

3
Bottom View
Rear View
10. Microphone (Sub)
11. Flash LED
12. Rear Camera
13. Speaker
14. Hand Strap Holes
15. NFC
16. Pogo Pin for gun grip
17. Pogo Pin for cradle
18. Microphone (Main)
19.Hand Strap Hole
20. USB Type-C Hole

4
1.3 Specifications
System Features
CPU
Qualcomm Snapdragon™ 6490 Processor, 64bits,
Octa Cores up to 2.7 GHz
Memory
6 GB RAM
64 GB UFS Flash (128GB option)
OS
Android 12 with GMS & AER certified
GMS certified
GMS certified
Languages support
Multiple languages
Display
Screen Size
6.3” Color LCD 2160 X 1080 (FHD+) High Resolution Display
Touchpanel
Gorilla Glass with Multi-Touch Capacitive Touch Panel,
support stylus, glove, wet-finger Compatibility
High sunlight visibility - LCD backlight up to 500nits
Keypad
Programmable key, Volume up/down key, Left/right scan key, Power key
Camera
5 MP Front camera
16 MP Rear Camera with LED flash and auto-focus function,
Support Google ARcore
Indicator Type
LED, Vibrator
Symbologies
Built-in 2D imager engine with red laser aimer, with 1 Mpx & global shutter function
Support all 1D & 2D major barcodes
RFID
UHF UHF pistol grip (see RG768)
HF Support HF/NFC
Frequency 13.56Mhz
Support: ISO14443A/B, ISO15693, Mifare,
Felica(ISO/IEC18092)

5
Power Source
Main Battery
Hot Swappable 5100mAh Li-Polymer battery /
battery with cover in one piece
Extended battery
7600mAh / battery with cover in one piece (optional)
Hot Swap
Yes
Regulatory Approvals
CE, FCC, NCC, VCCI, TELEC, CCC, SRRC, BQB, N-Mark, RoHS 2.0
Communication
Bluetooth®
Bluetooth® 5.2 , BLE 5, Class 1
WLAN
WLAN 6E+DBS, 2.4GHz & 5GHz & 6GHz
IEEE 802.11a/b/g/n/ac/d/h/i/k/r/v/ac/ax (2x2 MU-MIMO)
Security WPA3, WPA2, WPA & WEP
WWAN
5G Sub 6GHz:N1/N2/N3/N5/N28/N41/N71/N77/N78/N79
(4x4 MIMO)
4G LTE(FDD) – Bands 1, 2, 3, 4, 5, 7, 8, 17, 20, 28
(TDD) – Bands 38, 39, 40, 41
3G UMTS/HSPA+ – Bands 1, 2, 5, 8
2G GSM/GPRS/EDGE (850/900/1800/1900 MHz)
GPS
GPS, GLONASS, Gallileo, Beidou, QZSS, SBAS,
supports L1+L5, a-GPS, XTRA
Sensors
Gyroscope, G-sensor, E-compass, Light & Proximity Sensor
I/O Interfaces
USB
USB 3.1 type C, support fast charging, OTG
POGO PIN
Bottom pogo pin for cradles, rear pogo pin for pistol grips
SIM Slot
Nano SIM Slot x 2
Expansion slot
Micro SD x 1, up to 256 GB
Audio
SmartPA Speaker support 100 dB at 10cm
Dual-Microphone support noise cancellation
Enclosure
Dimensions
167mm x 75.5mm x 17mm ( H x W x D )
Weight
270 g
Environmental
Operating temperature
-4°F to 131°F (-20°C to 55°C)

6
Storage temperature
-40°F to 158°F (-40°C to 70°C), without battery
Relative Humidity
5% ~ 95% (Non-Condensing)
Drop Specification
1.8 meter with bumper
1.5 meter without bumper
Sealing
IP67
Vibration/Tumble test
Tumble 600 times (1.6 ft./0.5 m)
Software
MDM Software
SOTI, AirWatch, 42Gears, 12Manage, and MoboLink
Accessories
■Hand Strap
■USB 3.0 Type-C cable
■Fast charge adaptor
■9H glass screen protector
■1 Slot USB cradle
■1 Slot Charging cradle
■1 Slot Ethernet cradle
■Multi-Slot Terminal Charging / Ethernet
Cradle /Battery Charger
■Standard/UHF pistol grip
■Stylus with Coiled strap
Note:
The device is restricted to indoor use only when operating in the 5150 to 5350
MHz frequency range.
AT
BE
BG
HR
CY
CZ
DK
EE
FI
FR
DE
EL
HU
IE
IT
LV
LT
LU
MT
NL
PL
PT
RO
SK
SI
ES
SE
UK
IS
LI
NO
CH
TR

7
1.4 Getting Started
1.4.1 Inserting the Micro SD/Nano SIM Card
1. Pick out the Micro SD/Nano SIM card holder.
2. You may put in 2 SIM cards or one SIM card and one SD card at a time.
or

8
1.4.2 Install the Battery
1. Align the battery with the battery compartment following the picture below.
2. Press and hold both of the plastic buckles at the bottom, then push against the
front.
3. Press down the battery to secure in place

9
1.4.3 Remove the battery
1.Press and hold both of the plastic buckles at the bottom.
2. Push the battery against the front and lift to remove.

10
1.4.4 Charging the Battery
Before using the DR6 for the first time, you need to charge it for about 24
hours. For the regular use, you can charge the DR6 for 4 hours to recharge
the battery to full capacity.
To charge the DR6, please use the USB charging cable or the cradle.
Connect the type C USB cable to the USB port on DR6 and the other end of
the USB cable connect to AC power adapter into the electrical outlet on the
USB plug. The charging LED indicator on DR6 is turning red when it is in
charging state.
Note:
To protect your device, the USB port will be disabled once it detects
contaminants. You will see the following popup window:

11
1.4.5 Battery Info
Please go to Settings → BatteryInfo for more detailed battery information.

12
1.4.6 Turning on the DR6 for the first time
It is recommended to fully charge DR6 before first use. You can now start up
your device to set up the languages, WLAN setting, and date and time.
Power Button
Turn ON your device by pressing the power button on the side of the DR6.
Power Button

13
1.4.7 Checking the LED status
Checking the Battery Status
LED
Description
Red Light
Battery Charging
Green Light
Battery Fully charged
Barcode scan good read
Blue Light
Message
If scanner app is running, LED is controlled by the scanner app.
No LED (Red and Green) display when battery is out. (even with AC IN)
WARNING! There is a risk of fire and burns if the battery is handled improperly. DO NOT
disassemble, crush, puncture, short external contacts, or dispose the battery
pack in fire or water. DO NOT attempt to open or service the battery. Dispose of
used batteries according to local recycling guidelines in your area.

14
Chapter 2 – Installation & Operation
2.1 Barcode Setting
1. On the main screen, scroll up the screen to reach the APPS, and
tap Settings and then tap USS (Wasp scan service).
Or from the notification bar to tap ScanService.
or
on
2. You now enter the USS application.
2.1.1 Settings
After you enter the application, please tap the screen
to see all the settings of USS.

15
2.1.2 Barcode Scan
1. Please tap Start Scan to get ready for barcodes scan service.
You may tap Stop scan to stop scanning, and choose if you want to
scan under Auto scan mode.
2. For Save / Load Settings, and Factory Default, Please tap and to
select Save / Load Settings, and Factory Default.

16
3. To save settings, you can also tap Save on the screen and input path then
tap OK.
The saved data is stored in Files →Documents

17
USSExport → ScannedResults.txt.
Note: For more information, please refer to 3.1 USS (Wasp scan service)

18
2.2 HF Setting
2.2.1 HF Setting
1.On the main screen, scroll the screen from bottom to top to reach the APPS,
and tap Settings then Connected devices.
2.Tap Connection Preferences to enable NFC