Watec WAT-910HX User manual

January 23, 2013
WAT-910HX
WAT-910HXWAT-910HX
WAT-910HX
OSD USER MANUAL
OSD USER MANUALOSD USER MANUAL
OSD USER MANUAL
Rev. 1.00
Wa ec Co., L d.
Wa ec Co., L d.Wa ec Co., L d.
Wa ec Co., L d.
1

Change His ory
Change His oryChange His ory
Change His ory
2013.01.23
Rev. No. Da e Changes
1.00
Remarks
Ini ial Release
2

1.
1.1.
1. In roduc ion
In roduc ion In roduc ion
In roduc ion
・・・・・・・・・・・・・・・・・・ 4
44
4
2.
2.2.
2. OSD MENU OPERATION
OSD MENU OPERATION OSD MENU OPERATION
OSD MENU OPERATION
・・・・・・・・・・・・ 5
55
5
3
33
3 SETUP MENU(TOP MENU)
SETUP MENU(TOP MENU) SETUP MENU(TOP MENU)
SETUP MENU(TOP MENU)
・・・・・・・・・・・ 8
88
8
EXPOSURE MENU
・・・・・・・・・・・・・・・・・ 8
3.1.1 SHUTTER
・・・・・・・・・・・・・・・・・・・・ 9
3.1.2 SENS UP
・・・・・・・・・・・・・・・・・・・・・ 10
3.1.3 AGC
・・・・・・・・・・・・・・・・・・・・・・・ 11
3.1.4 BLC
・・・・・・・・・・・・・・・・・・・・・・・ 12
3DNR MENU
・・・・・・・・・・・・・・・・・・・ 14
WDR MENU
・・・・・・・・・・・・・・・・・・・・ 15
ADJUST MENU
・・・・・・・・・・・・・・・・・・ 16
3.4.1 SHARPNESS
・・・・・・・・・・・・・・・・・・・ 16
3.4.2 GAMMA
・・・・・・・・・・・・・・・・・・・・・ 17
3.4.3 SETUP-LEVEL
・・・・・・・・・・・・・・・・・・ 17
FUNCTIONS MENU
・・・・・・・・・・・・・・・・ 18
3.5.1 EFFECT
・・・・・・・・・・・・・・・・・・・・・ 18
3.5.1.1 FREEZE ・・・・・・・・・・・・・・・・・・ 18
3.5.1.2 FLIP ・・・・・・・・・・・・・・・・・・・ 18
3.5.1.3 ZOOM ・・・・・・・・・・・・・・・・・・・ 19
3.5.1.4 NEG.IMAGE ・・・・・・・・・・・・・・・・ 20
3.5.2 MOTION
・・・・・・・・・・・・・・・・・・・・・ 20
3.5.3 BPC
・・・・・・・・・・・・・・・・・・・・・・ 22
RESET MENU
・・・・・・・・・・・・・・・・・・・ 23
EXIT MENU
・・・・・・・・・・・・・・・・・・・・ 23
4.
4.4.
4. Save se ings
Save se ings Save se ings
Save se ings
・・・・・・・・・・・・・・・・・・・ 24
2424
24
5.
5.5.
5. OSD Menu Tree
OSD Menu Tree OSD Menu Tree
OSD Menu Tree
・・・・・・・・・・・・・・・・・ 25
2525
25
3.5
3.4
【
【【
【Con en s
Con en sCon en s
Con en s 】
】】
】
3.6
3.7
3.2
3.3
3.1
3

1.In roduc ion
1.In roduc ion1.In roduc ion
1.In roduc ion
・ The WAT-910HX user manual describes he func ions and he adjus men me hod using he On Screen Display (OSD).
・When he se ings of he WAT-910HX are changed according o he WAT-910HX user manual, check o see
ha he opera ion and he effec s of he changes made o he camera are accep able.
・The WAT-910HX user manual is subjec o change by design and he specifica ions of he produc wi hou no ice.
・The copyrigh of he WAT-910HX user manual shall belong o Wa ec Co., L d. Copying in whole,
or in par wi hou he au horiza ion of he holders permission is prohibi ed.
4

2.OSD MENU OPERATION
2.OSD MENU OPERATION2.OSD MENU OPERATION
2.OSD MENU OPERATION
The func ions and parame er se ings of WAT-910HX can be changed by OSD(On Screen Display).
When opera ing OSD, Jog Swi ch is used.
See he picu ure below for he de ailed func ion of 3 keys.
The opera ion por ion of he Jog Swi ch
When using 1)UP&RIGHT/2)DOWN&LEFT, slide 1)UP&RIGHT/2)DOWN&LEFT bu on upward/downward.
1)UP&RIGHT : There are mainly wo func ions. One is o move he cursor upward on OSD Menu, and he o her
is o adjus and change he func ions on each lis (defined as righ ward direc ion).
2)DOWN&LEFT : There are mainly wo func ions. One is o move he cursor downward on OSD Menu, and he
o her is o adjus and change he func ions on each lis (defined as lef ward direc ion).
3)ENTER : Mainly o execu e/se he selec ed lis and func ion on OSD Menu.
Typically, 1)UP&RIGHT/2)DOWN&LEFT func ion work as up-and-down movemen . O her han ha , when pressing
3)ENTER on one of he lis s, he cursor will s ar o blink, hen, he bu ons' func ions changes o
righ -and-lef movemen .
When pressing 3)ENTER again under he above condi ion, he cursor will s op blinking. Then, he bu ons' func ions
re urn o work as up-and-down movemen .
The symbol "↵" will be on some lis s on OSD Menu o indica e ha here are Sub Menus or selec able op ions by
pressing 3)ENTER.
2)DOWN&LEFT
(Slide
downward)
1)UP&RIGHT
(Slide upward)
3)ENTER
(Push)
5

Please refer o he following model opera ion pic ures on he basic Jog Swi ch usage.
AGC is highligh ed in he second pic ure from he op, and hese pic ures explain wha happens when 3 bu ons are
con rolled.
Ini ial
The cursor flashing.
Branch Menu →
Press
2)DOWN&LEFT
(AGC=MID)
Press
1)UP&RIGHT
(AGC=OFF)
Press 3)ENTER
(S ar he cursor
flashing)
Press 2)DOWN&LEFT
(Selec ing BLC)
Press 3)ENTER
(S op he cursor
flashing)
Press 1)UP&RIGHT
(Selec ing SENS UP)
Press 3)ENTER
(S op he cursor
flashing)
Press 3)ENTER
(Going o
MANUAL GAIN)
6

From he nex page, each bu on is wri en as follows.
1)UP&RIGHT is wri en as "UP key", and 2)DOWN&LEFT is wri en as "DOWN key".
(When he keys are used for up-and-down movemen .)
In addi ion, 1)UP&RIGHT is wri en as "RIGHT key", and 2)DOWN&LEFT is wri en as "LEFT key".
(When he keys are used for righ -and-lef movemen .)
3)ENTER is wri en as "ENTER key".
7

3.SETUP MENU(TOP MENU)
3.SETUP MENU(TOP MENU)3.SETUP MENU(TOP MENU)
3.SETUP MENU(TOP MENU)
When pressing ENTER key, SETUP menu will appear on he screen.
3.1 EXPOSURE MENU
3.1 EXPOSURE MENU3.1 EXPOSURE MENU
3.1 EXPOSURE MENU
When adjus ing EXPOSURE se ings, move he cursor o EXPOSURE and press ENTER key.
Press UP/DOWN bu on o choose one of he i ems in EXPOSURE, press he ENTER key o selec ,
and change i wi h LEFT/RIGHT key. Press he ENTER key o se .
ENTER key
ENTER key
8

3.1.1 SHUTTER
3.1.1 SHUTTER3.1.1 SHUTTER
3.1.1 SHUTTER
Selec Shu er Speed(or Shu er Mode) wi h LEFT/RIGHT key.
The defaul se ing is EI.
Selec ed number of fields x 1/60s(EIA)or1/50s(CCIR) will be he
calcula ed fixed shu er speed in seconds.
Shu er Speed
Shu er Mode De ails
x128
x64
x32 Slow speed shu er
x256
I is he func ion which adjus s he shu er speed from he slow
shu er speed (selec ed wi h he SENS UP menu) o 1/100000(sec),
which depends on brigh ness of a camera objec , and main ains a
proper exposure s a e.
x16
(fixed shu er speed)
x8
x4
x2
The High speed shu er is defined as he selec ed Shu er Speed.
FL is he abbrevia ion of FLICKER-LESS(1/100(sec):EIA or
1/120(sec):CCIR).
1/500 High speed shu er
EI Elec ronic iris
*1/60(1/50)
FL
1/250
(fixed shu er speed)
1/2000
1/5000
1/10000
1/1000
1/100000
* 1/60(sec):EIA, 1/50(sec):CCIR
No e. Only when selec ing 1/60(1/50) Shu er Speed, he EI range is
from he selec ed slow shu er speed in he SENS UP se ing, up o
1/60(1/50), and he EI can main ain a proper exposure of a camera
objec wi hin his range.
9

3.1.2 SENS UP
3.1.2 SENS UP3.1.2 SENS UP
3.1.2 SENS UP
When selec ing EI(elec ronic iris) or 1/60(1/50) in SHUTTER, Slow speed shu er can be used o
adjus exposure. Use LEFT/RIGHT key o selec ON/OFF. When pressing ENTER key af er selec ing ON,
he maximum number of fields under he SENS UP opera ion can be selec ed.
The defaul se ing is x4.
ENTER key
OFF
LEFT/RIGHT
key
The maximum number of fields in Slow Shu er Mode. →
Shu er Mode SENS UP De ails
The slow shu er speed can be selec ed from; x2/x4/x8/x16/x32/
Elec ronic Iris wi h slow shu er speed mode.
(o her) OFF
Fixed shu er speed mode.(selec ed in SHUTTER)
EIA:1/60
CCIR:1/50
OFF
Fixed shu er speed mode(1/60(1/50)(sec))
ON
Elec ronic Iris using slow shu er speed mode from SENS UP(number of
fields) o 1/60s(1/50s).
Elec ronic Iris mode.
(from 1/60(1/50)(sec) o 1/100000(sec))
EI
ON
x64/x128/x256. Use LEFT/RIGHT key o se he value.
(from SENS UP(number of fields) o 1/100000(sec))
The slow shu er speed can be selec ed from; x2/x4/x8/x16/x32/
x64/x128/x256. Use LEFT/RIGHT key o se he value.
10

3.1.3 AGC
3.1.3 AGC3.1.3 AGC
3.1.3 AGC
AGC Value can be changed.
Use LEFT/RIGHT key o se up AGC Value. During selec ing OFF, when pressing ENTER key, SUB MENU for
MANUAL GAIN Se ings appears.
The defaul se ing is HIGH. When selec ing OFF, AGC is fixed o 6dB as defaul .
← MANUAL GAIN
AGC Mode (Sub Menu) De ails
OFF
GAIN
A fixed AGC level can be se . I can range from approx. 6 o 41(dB)
Use LEFT/RIGHT key o change he AGC level.
RETURN
Use LEFT/RIGHT key o show RET/END. Pressing ENTER key on RET,
re urns o EXPOSURE Se ings. Pressing ENTER key on END, OSD
menu urns off and SETUP is finished.
LOW －
Gain range ：approx. (min.)6 o (max.)30(dB)
MID －
Gain range : approx. (min.)6 o (max.)34.5(dB)
HIGH －
Gain range : approx. (min.)6 o (max.)41(dB)
LEFT/RIGHT key
ENTER key
11

3.1.4 BLC
3.1.4 BLC3.1.4 BLC
3.1.4 BLC
Selec Backligh opera ion on he menu. Tradi ional Backligh Compensa ion(BLC) mode and High Ligh
Suppress Backligh (HSBLC) mode can be selec ed.
Use LEFT/RIGHT key o selec OFF/BLC/HSBLC. When BLC/HSBLC is selec ed, press ENTER o show Sub Menu.
The defaul se ing of BLC is OFF. When selec ing BLC, he defaul GAIN is MID. When selec ing HSBLC,
he defaul level of HSBLC is 4. The area defaul of BLC HSBLC is as follows.
No e. BLC/HSBLC does no work under he condi ion below.
SHUTTER is fixed shu er speed mode & SENS UP is OFF & AGC is OFF
However, when selec ing HSBLC, he high ligh ing area is masked.
Sub Menu →
－
The BLC func ion is OFF.
OFF
BLC
GAIN
LEFT/RIGHT key
ENTER key
Press he ENTER key o posi ion and se he size of he BLC
area window
2
22
2
.
Change he level of BLC effec wi h LEFT/RIGHT bu on.
LOW / MID / HIGH
Use LEFT/RIGHT key o selec GAIN.
ENTER key
BLC Mode (Sub Menu) De ails
(The size of he effec ive area
is he defaul se ing.)
area window
2
22
2
.
DEFAULT
Re urn he se ing o defaul when pressing ENTER key.
DEFAULT
Re urn he se ing o defaul when pressing he ENTER key.
AREA
RETURN
Use LEFT/RIGHT key o show RET/END. Pressing ENTER key on RET,
re urns o EXPOSURE Se ings. Pressing ENTER key on END, OSD
menu urns off and SETUP is finished.
HSBLC
LEVEL
Defining he brigh ness level of he high ligh ing area
1
11
1
o be covered
by a mask. 0(only high brigh ness area) - 8(high and low brigh ness area)
Use LEFT/RIGHT key o change he level.
AREA
Use LEFT/RIGHT key o show RET/END. Pressing ENTER key on RET,
re urns o EXPOSURE Se ings. Pressing ENTER key on END, OSD
menu urns off and SETUP is finished.
Press he ENTER key o posi ion and se he size of he BLC
If selec ing DEFAULT, changed LEVEL/AREA will re urn o he
ini ial se ing.
RETURN
If selec ing DEFAULT, changed GAIN/AREA will re urn o he ini ial
se ing.
12

1
11
1
How HSBLC effec s on image when changing LEVEL
2
22
2
How o se up he BLC/HSBLC area
(1)POSITION Se ing
The posi ion of he effec ive BLC/HSBLC area can be se
on his Se ing.
The horizon al posi ion of he effec ive BLC/HSBLC area can be
moved by pressing UP&RIGHT/DOWN&LEFT key.
Af er pressing ENTER key, adjus ing he ver ical
posi ion can be conduc ed in same way as he
horizon al posi ion adjus men . The size can be se af er
he posi ion is se by pressing he ENTER key.
*HINT: When posi ioning he window, align he op lef corner
o he desired window posi ion's op lef corner, as he SIZE
Se ing references his corner.
(2)SIZE Se ing
The size of he effec ive BLC/HSBLC area can be adjus ed
on his se ing.
Use UP&RIGHT/DOWN&LEFT key o adjus he horizon al
size. Af er he adjus men , press ENTER key. Use he
same key o adjus he ver ical size.
When finishing he size adjus men , press ENTER key.
(3)RET/AGAIN Se ing
Use UP&RIGHT/DOWN&LEFT key o selec RET/AGAIN.
LEFT/RIGHT key
LEVEL=0 LEVEL=4 LEVEL=8
ENTER key
When pressing ENTER key on AGAIN,
re urning o POSITION Se ing.
ENTER key
When pressing ENTER key on RET,
re urning o BLC/HSBLC Menu.
13

3.2 3DNR MENU
3.2 3DNR MENU3.2 3DNR MENU
3.2 3DNR MENU
Three-dimensional noise reduc ion(3DNR) can be se on his menu.
Use LEFT/RIGHT key o selec ON/OFF. When ON is selec ed, press ENTER key o show Sub Menu.
The defaul se ing is ON, and he defaul level is 50.
No e. Se ing he larger value of he 3DNR LEVEL means ha random noise is reduced more effec ively, however,
moving objec resolu ion may be reduced, and/or fixed pa ern noises may increase.
De ails
LEFT/RIGHT
key
ENTER key
Use LEFT/RIGHT key o change he level.
RETURN
Use LEFT/RIGHT key o show RET/END. Pressing ENTER key on RET,
LEFT/RIGHT key
LEVEL=0 LEVEL=50 LEVEL=100
3DNR Mode (Sub Menu)
OFF －
3DNR is OFF.
ON
LEVEL
Level of he 3DNR.
From 0(weak) o 100(s rong)
re urns o SETUP screen. Pressing ENTER key on END, OSD
menu urns off and SETUP is finished.
14

3.3 WDR MENU
3.3 WDR MENU3.3 WDR MENU
3.3 WDR MENU
The dynamic range of dark and/or brigh par is expanded by digi al processing.
Selec WDR func ion OFF/USER1/USER2 wi h LEFT/RIGHT key.
When USER1/USER2 is selec ed, press ENTER key o show Sub Menu.
The defaul se ing is OFF. The defaul se ing of USER1/USER2 for dark par is 3(USRE1)/9(USER2). The defaul
se ing for brigh par is 13(USER1)/11(USER2).
Sub Menu →
No e. There is no difference wi h WDR func ion be ween USER1 and USER2.
WDR effec in he brigh area
LEFT/RIGHT key
WDR Mode (Sub Menu) De ails
WDR effec in he dark area
ENTER key ENTER key
OFF －
Dynamic range expanding func ion is OFF.
USER1 / USER2
L-LEVEL
(L-LEVEL) Expanding level of he dark par .
From 0(weak) o 15(s rong)
(larger value means more effec ive)
Use LEFT/RIGHT key o change he level.
H-LEVEL
(H-LEVEL) Expanding level of he brigh par .
From 0(s rong) o 15(weak)
(smaller value means more effec ive)
Use LEFT/RIGHT key o change he level.
RETURN
Use LEFT/RIGHT key o show RET/END. Pressing ENTER key on RET,
re urns o SETUP screen. Pressing ENTER key on END, OSD
menu urns off and SETUP is finished.
15

3.4 ADJUST MENU
3.4 ADJUST MENU3.4 ADJUST MENU
3.4 ADJUST MENU
Use his se ing o adjus he image quali y.
Selec ADJUST and press ENTER key o show Adjus menu. Use UP/DOWN key o selec one of he lis s on he
menu, and use LEFT/RIGHT key o adjus .
3.4.1 SHARPNESS
3.4.1 SHARPNESS3.4.1 SHARPNESS
3.4.1 SHARPNESS
By using LEFT/RIGHT bu ons, SHARPNESS(edge enhancemen ) adjus men is available.
The defaul se ing is 4.
SHARPNESS=31
SHARPNESS=16
ENTER key
SHARPNESS=0
SHARPNESS=4
SHARPNESS=8
16

3.4.2 GAMMA
3.4.2 GAMMA3.4.2 GAMMA
3.4.2 GAMMA
GAMMA charac eris ic is adjus able from USER
3
33
3
, 0.05 o 1.0 (0.05 s eps).
Use LEFT/RIGHT key o adjus GAMMA.
The defaul se ing is 0.45.
Please selec a proper gamma value o ma ch a moni or's charac eris ics. Generally, a dark par in
a video frame becomes brigh when gamma value is small. However, increases in appearances
of "whi e ou s" and noises may occur.
3
33
3
The charac eris ic of USER mode
(However, he VIDEO ou pu of dark par s in USER mode becomes lower han in 0.45.)
The figure of gamma charac eris ics is as follows.
3.4.3 SETUP-LEVEL
3.4.3 SETUP-LEVEL3.4.3 SETUP-LEVEL
3.4.3 SETUP-LEVEL
Only 0IRE/7.5IRE can be se .
Use LEFT/RIGHT key o se he level.
The defaul se ing is 7.5IRE.
No e. SETUP-LEVEL is available o EIA only. There is no menu available o CCIR.
LEFT/RIGHT key
GAMMA=0.05 GAMMA=0.45 GAMMA=1.00
LEFT/RIGHT
key
USER mode is a gamma curve of 0.45 which has improved S/N in dark par s of he image.
GAMMA=USER
17

3.5 FUNCTIONS
3.5 FUNCTIONS3.5 FUNCTIONS
3.5 FUNCTIONS MENU
MENUMENU
MENU
The digi al image adjus men can be se .
When pressing ENTER key on FUNCTIONS, FUNCTIONS menu will appear. Use UP/DOWN key o selec one of he lis s on
he menu and press ENTER key. Af er ha , Sub menu rela ed o digi al image adjus men will appear.
In selec ing MOTION, use LEFT/RIGHT key o selec ON/OFF.
3.5.1 EFFECT
3.5.1 EFFECT3.5.1 EFFECT
3.5.1 EFFECT
When pressing ENTER key on EFFECT, he lis of digi al image adjus men will appear.
3.5.1.1 FREEZE
3.5.1.1 FREEZE3.5.1.1 FREEZE
3.5.1.1 FREEZE
Selec ON/OFF s a e by using LEFT/RIGHT bu ons.
When he FREEZE func ion is urned ON, he video ou pu signal will be a repea of he same frame pic ure.
The defaul se ing is OFF.
3.5.1.2 FLIP
3.5.1.2 FLIP3.5.1.2 FLIP
3.5.1.2 FLIP
OFF(normal image), H-FLIP(horizon al flip), V-FLIP(ver ical flip)
and HV-FLIP(horizon al and ver ical flip) are available.
Use LEFT/RIGHT key o selec one of he effec s. The defaul se ing is OFF.
(1) OFF (2) H-FLIP (3) V-FLIP (4) HV-FLIP
Normal Image Horizon al Flip Ver ical Flip Horizon al and
For example, a back Ver ical Flip
moni or on au omobiles Ro a ing he
is a possible image by 180
applica ion. degrees.
LEFT/RIGHT key
ENTER key
ENTER key
18

3.5.1.3 ZOOM
3.5.1.3 ZOOM3.5.1.3 ZOOM
3.5.1.3 ZOOM
Digi al zoom func ion is available.
Use LEFT/RIGHT key o selec ON/OFF. When pressing ENTER key on ON, Sub Menu will appear.
The defaul se ing is OFF.
When selec ing ON, x1.0 is he defaul value of he magnifica ion, and 0 is he defaul value of PAN and TILT.
Sub Menu →
4
44
4
Magnifica ion S eps
x1.0 o x4.0 : x0.1s eps
x4.0 o x8.0 : x0.5s eps
x8.0 o x16.0 : x1.0s eps
x16.0 o x32.0 : x2.0s eps
Example
LEFT/RIGHT
key
ENTER key
OFF －
Normal image(digi al zoom OFF)
ZOOM (SUB MENU) De ails
ON
ZOOM
Se up he magnifica ion of digi al zoom.
By using LEFT/RIGHT bu ons,i can be se o a maximum magnifica ion of 32 imes.
PAN
Horizon al PAN posi ion is specified (invalid when ZOOM is
se o x1.0 magnifica ion). From -100(LEFT) o 100(RIGHT)
RETURN
Use LEFT/RIGHT key o show RET/END. Pressing ENTER key on RET,
re urns o FUNCTIONS Se ings. Pressing ENTER key on END, OSD menu
(0 is cen er posi ion) Use LEFT/RIGHT key o se he imaging posi ion.
TILT
Ver ical TILT posi ion is specified (invalid when ZOOM is
se o x1.0 magnifica ion). From -100(UP) o 100(DOWN) (0 is cen er posi ion)
Use LEFT/RIGHT key o se he imaging posi ion.
urns off and SETUP is finished.
The magnifica ion ranges from x1.0 o x32.0.
4
44
4
19

3.5.1.4 NEG.IMAGE
3.5.1.4 NEG.IMAGE3.5.1.4 NEG.IMAGE
3.5.1.4 NEG.IMAGE
Selec Nega ive image (NEG.IMAGE) func ion ON/OFF wi h LEFT/RIGHT key.
The defaul se ing is OFF.
3.5.2 MOTION
3.5.2 MOTION3.5.2 MOTION
3.5.2 MOTION
Mo ion de ec ion can be se .
Use LEFT/RIGHT key o selec ON/OFF. When pressing ENTER key on ON, Sub Menu will appear.
The defaul se ing is OFF. When MOTION is urned ON, AREA SELECT is AREA1, AREA DISPLAY is ON (AREA DISPLAY
for AREA2-4 is OFF by defaul ), defaul SENSITIVITY is 40. The o her areas can be selec ed as below.
Sub Menu →
AREA1
AREA2 AREA3 AREA4
LEFT/RIGHT
key
LEFT/RIGHT
key
ENTER key
(The size of he effec ive area
is he defaul se ing.)
20