WATSON PRO AM-160-CS-R User manual

Thank you for choosing Watson Pro
Please read this user manual carefully, and keep
it for reference before using the battery.
AM-160-CS-R
VM-160-CS-R
Cine style
Li-ion Battery with LED
and 3-Stud or V-Mount
TM

SAFETY INSTRUCTIONS
Make sure the battery is fully charged before use.
When not in use, remove the battery from its device. Some
electronic equipment will draw current even when the switch is off.
Do not short-circuit the terminals. This battery is protected with
an internal self-resetting fuse, but short circuits may still cause
severe damage to the battery.
Do not attempt to open the battery case under any circumstances.
Do not remove the battery from any equipment that is powered on.
Always power off your equipment before removing the battery.
Use the battery under proper environmental conditions: 14°F to
122°F (-10°C to 50°C) with a Relative Humidity (RH) less than 85%.
The battery may be warm during use or recharging. This is normal.
The battery should be charged up to 40% for storage longer than
one month, and should be charged every 6 months.
Keep the battery away from fire, heat, and high pressure.
Do not expose the battery to rain or moisture.
Do not drop the battery or subject it to strong shocks.
Keep this unit away from water and any flammable gases or liquids.
Clean the battery and terminals with only a clean, soft,
and dry cloth.
When operation time has noticeably decreased, the battery may
need to be replaced.
Keep this product away from children.
Store the battery in a cool, dry place.

OVERVIEW
1. Battery-level LED meter
Shows remaining capacity of
the battery. When capacity
reaches less than 9%, the
leftmost LED will flash.
1. Battery-level check button
1. D-tap output
12 V, 10 A max
1. USB output
Press the battery-level check
button to start charging or to
power your USB device.
1. Mounting interface: 3-stud
or V-mount
1
2
3
4
5
4
1
2
5
3
PRODUCT FEATURES
High-powered li-ion cells provide constant output up
to 120 W and 10 A.
Battery-level LED indicators for remaining battery
capacity.
Built-in D-tap connector powers your camera
accessories.
5 V/1 A USB 2.0 output for USB-powered devices.
Built-in intelligent control circuit protects against
damage from current or voltage overload,
overheating, or short circuits.

SPECIFICATIONS
CHARGING TIME
Battery Single channel Dual channel Four channel
AM-160-CS-R
VM-160-CS-R 500 min. 400 min. 200 min. 400 min.
GG1
www.poweredbywatson.com
Watson Pro is a registered trademark of the Gradus Group.
© 2017 Gradus Group LLC. All Rights Reserved.
TM
Mount type AM-160-CS-R: 3-Stud
VM-160-CS-R: V-Mount
Capacity 158.4 Wh, 11 Ah
Voltage 14.4 V
Max output power 120 W
Max output current 10 A
Average run-time 271 min. @35 W
Weight 2.9 lb. (1.3 kg)
Dimensions
(H � W � D)
AM-160-CS-R: 4.5 � 3.6 � 4.2 in.
(11.5 � 9.2 � 10.6 cm)
VM-160-CS-R: 4.5 � 3.6 � 3.9 in.
(11.5 � 9.2 � 9.8 cm)
BATTERY STORAGE
Up to one month Up to three months Up to one year
Storage
environment
-4°F to 122°F
(-20°C to 50°C)
-4°F to 104°F
(-20°C to 40°C)
23°F to 86°F
(-5°C to 30°C)
Relative
humidity 45% to 75% 45% to 75% 45% to 75%