waveline WLM-2000E Manual

WLM-2000E
Step 1: Assemble straight poles by
pressing and pushing together.
Step 4: Unzip print and lay image
face up. Slide print onto frame like
a pillow case.
LIGHTS:
(OPTIONAL) Position as desired
and tighten knob to hold in place.
WARNING! Over tightening may
cause damage to fabric image.
Step 2: Connect all corner sections
to curved and straight sections
of the frame by matching shape
symbols on pipes.
Step 5: Zip the edge of graphic
beyond the center point as shown
to hold the center pole in place. Zip
the remaining side and bottom to
meet at the corner.
Step 6: Complete.
Step 3: Insert feet into base to
complete assembled frame shown.

WLM-2000F
Step 1: Assemble straight poles by
pressing and pushing together.
Step 5: Unzip print and lay image
face up. Slide print onto frame like
a pillow case.
LIGHTS:
(OPTIONAL) Position as desired
and tighten knob to hold in place.
WARNING! Over tightening may
cause damage to fabric image.
Step 2: Connect all corner sections
to curved and straight sections
of the frame by matching shape
symbols on pipes.
Step 6: Zip the edge of graphic
beyond the center point as shown
to hold the center pole in place. Zip
the remaining side and bottom to
meet at the corner.
Step 7: Complete.
Step 3: Insert center support pole. Step 4: Insert feet into base to
complete assembled frame shown.

WLM-2011B
Step 1: Assemble the two long
curved and straight sections to-
gether. The frame is symmetrical
and either of the curved sections
can be top or bottom.
Step 4: Unzip print and lay image
face up. Slide print onto frame like
a pillow case.
LIGHTS:
(OPTIONAL) Position as desired
and tighten knob to hold in place.
WARNING! Over tightening may
cause damage to fabric image.
Step 2: Connect all corner sections
to curved and straight sections
of the frame by matching shape
symbols on pipes.
Step 5: Zip the edge of graphic
beyond the center point as shown
to hold the center pole in place. Zip
the remaining side and bottom to
meet at the corner.
Step 6: Complete.
Step 3: Complete assembled frame
shown.

WLM-PANEL CONNECTION
FEET CLAMPS
WLM-P-22E WLM-P-22EWLM-P-22R WLM-P-22L