Waversa WMiniHPA MK2 User manual

WMiniHPA MK2
Owner’s Manual

Important Notice
1. Read these instruction manual
2. Keep the manual
3. Keep remind all warnings
4. Follow all instructions
5. Do not use this equipments near water or moisture
6. Clean only with dry cloth
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions
8. Do not use near any heat sources such as radiators, stoves or heat registers
9. Use grounding-type plug
10. Use only attachments/accessories specified by the manufacturers
11. Unplug this equipmentduring lightning storms or when unused for long periods of time
12. Refer all servicing to qualified service personnel. Servicingis required when the
equipment has been damaged inany way, such as power-supply cord or plug is
damaged,liguidhas been spilled or objects have fallen into the equipment, the equipment
has been exposed to rain or moisture, does not operate normally, or has been dropped.
Manufacturer does not take any responsibility for repairing due to misused operation
13. Do not put any liquidmaterial onto the equipment
14. Remove plug after checking the equipment power is off. Otherwise, it may cause
equipment failure.
WARNING: Unqualified personnel are not able to repair this equipments.
To reduce the risk of electric shock, do not open bottom cover on purpose.
WMiniHPA MK2 Owner’s Manual 01

Thanks for choosing
Waversa Systems’ WMiniHPA MK2.
Recent development of innovative IT/ Digital technology brings
vast changes in concept and environment of old Analog based
High-end Audio market.
Waversa Systems is leading
New High-end Audio paradigm combining world top class IT with
digital technology under the goal of developing sophisticated
sound and design.
Waversa Systems is
Happy with your purchasing equipments and promises to become
best partners for your audio life.
CEO Junho Shin
WMiniHPA MK2 Owner’s Manual 02

①Power/Source button
②IR remote sensor
③Headphone/Earphone (6mm, 3.5mm, 2.5mm)
④LED Panel
①Balanced output : XLR male
②Unbalanced output : RCA female
③SD card slot : Software update
④Inputs
•Coaxial
•Optical
•Ethernet
•USB A / B
⑤DC Input : 12V DC
WMiniHPA MK2 Owner’s Manual 03
① ②
③
④
⑤
① ② ③
④

WMiniHPA MK2 Owner’s Manual 04
Input Select
- Press power button 0.5 seconds for change source
- Press select button of WMiniRemote.
-Press source button of Remote Controller of “Quick Setting”
•U : USB Input
•C : Coaxial
•O : Optical
•D : DLNA
•R : Roon
•W : WNDR

WMiniHPA MK2 Owner’s Manual 05
PCM Enhancement function
-Press “menu” button and press “select” button
when “R” menu displayed on the LED screen
-“RB” : bypass input sample rate
-“R1” : 44.1 / 48 KHz
-“R2” : 88.2 / 96 KHz
-“R4” : 176.4 / 192 KHz
-“R8” : 352.8 / 384 KHz
- Select the resolution depend on your preference
- High resolution output willprovide warm sound
R1 R2
R4 R8

WMiniHPA MK2 Owner’s Manual 06
Volume Control
- 0 ~ 63 volume level supported
Brief Volume meter display

WMiniHPA MK2 Owner’s Manual 07

WMiniHPA MK2 Owner’s Manual 08
①Optical - Input for transport or TV’s optical output
②USB B - Input for PC or network player
③Coaxial - Input for CDT or CD Player’s digital output
④USB A - External USB Memory device extension
⑤Ethernet - Network connection for various network players
⑥Balanced Analog Output
⑦Unbalanced Analog Input/Output
⑧DC 12V Power Input
⑨SDCARD for Built-in Software
①② ③ ④⑤
⑥ ⑦
⑧
⑨

Finding IP address in Windows
- Windows Explorer →Network →Media Devices →Mouse right
click in WMiniHPA MK2 →Properties →IP address in the below
WMiniHPA MK2 Owner’s Manual 09

Finding IP address in Mobile Devices
-Install App named “Fing” →Scan Devices→Find WMiniHPA MK2 →
IP address in the below
WMiniHPA MK2 Owner’s Manual 10

1. In PC / Mobile device, User can connect “WMiniHPA MK2 Quick
Setting” web page.
2. Connect WMiniHPA MK2 to router with LAN cable
3. Connect PC / Mobile device to network.
4. Enter WMiniHPA MK2’s IP address into web browser(Explorer,
Safari , Chrome)
WMiniHPA MK2 Owner’s Manual 11

1. Select “Remote Controller” and press “Remote Controller” button
to open remote controller page
2. Power button for turn on/off WMiniHPA MK2
3. Menu, select button for using menu of WMiniHPA MK2
4. Source button to change input source
WMiniHPA MK2 Owner’s Manual 12

1. If new version of software for WMiniHPA MK2 then browser
indicate “New version available”
2. Select “Update” tab in WMiniHPA MK2 Quick Setting
3. Press “Update” button and wait for update done page displayed.
4. Press “Update” tab again and if it show “Update again” then press
“Update button” once more.
WMiniHPA MK2 Owner’s Manual 13

①Menu button
②Select button
③Source button
④Power button
⑤Volume Up button
⑥Volume Down button
WMiniHPA MK2 Owner’s Manual 14
①
②③④

①Power button
②Source button
③Volume Up button
④Volume Down button
WMiniHPA MK2 Owner’s Manual 15
①②③
④

WMiniHPA MK2 Owner’s Manual 16
NOTES: All specifications are accurate at the time of printing.
Waversa Systems reserves the right to adjust specifications without
notice.
1 x Balanced(XLR) Output
1 x Unbalanced(RCA) Output
Ultra Low Power Universal Serial Bus Audio Class 2.0
with High Precision Clock
Waversa System Processor(WAP) Type 1 applied Built-in
Linux 3.2 with 1GHz TI OMAP Processor ( ARM CORTEX-A8 )
Single ES9018K (Sabre)
•Coaxial
•Optical
•Ethernet
•USB A / B
•COAX, OPT- up to 96kHz
•USB/NET - PCM 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz
•USB /NET - DSD64, DSD128 (DOP), DSD256(Native DSD)
•Up to 384kHz
12V Adapter 90~120 VAC / 180~240 VAC @ 50~60Hz
W 180 x L 150 x H 37 (Spike 7 mm)
2 Kg
•DLNA
•AirPlay
•Roon
•WNDR –Waversa Network Direct Rendering

WMiniHPA MK2 Owner’s Manual 17
Install Driver program to use Windows (MAC doesn’t need this installation)
You can download driver file in followingURL.
http://www.waversa.com/download

WMiniHPA MK2 Owner’s Manual 18
1. Select ”N” source
2. Install ‘mconnect” from App/Play store.
3. Select WMiniHPA MK2 from “Play to” tab
4. Browse media files which you want to play by “Browser” tab

WMiniHPA MK2 Owner’s Manual 19
1. Select “N” source
2. Install “Roon Remote” from App/Play Store
3. Enter “Settings” and select “Audio” tab
4. Enable “Waversa Systems WDAC” and set name as “WMiniHPA MK2”
5. Press Speaker Icon in bottom right and then switch to “WMiniHPA MK2”
6. Choose media file to play.