WAY HUGE • PORK & PICKLE 2
1CLEAN BLEND knob mixes clean signal with OD or fuzz
2VOLUME knob sets output level
3OD/FUZZ switch toggles OD & fuzz circuits
4DRIVE knob sets overdrive or fuzz intensity
5CLEAN TONE knob adjusts clean signal from mellow to bright
6TONE knob cuts highs of OD signal or shapes EQ of fuzz signal
7FOOTSWITCH toggles the effect on/bypass
(blue LED indicates effect is on)
POWER
The Pork & Pickle™ Bass Overdrive & Fuzz is powered by a
single 9-volt battery, a 9-volt AC adapter such as the Dunlop
ECB003, or the DC Brick™ and Iso-Brick™ power supplies.
The power input is a 5.5mm x 2.1mm jack with the positive
voltage on the outer sleeve. Using an external power supply
will disconnect the battery. Disconnect the input jack to
preserve battery life when not in use. The pedal will lock into
bypass mode when it is time to change the battery. It also
includes power protection circuitry to prevent damage from
AC power supplies.
2
1
3
4
5
6
7
External Controls
