Waytronic WT-X22 User manual

Shenzhen Waytronic Electronics Co., Ltd WT-X22
1
WT-X22
Voice Prompter (WiFi Version)
1. Product introduction
Welcome to use Waytronic products, this product adopts motion induction technology, when a person passes
through the induction area, it will immediately broadcast the voice. The product uses a WIFI module, connects to
the WiFi network and server to realize central control management, with grouping, voice change, timing, playing
mode change function, it also support replace the voice by USB cable connect with computer. The appearance
and operation is simple and convenient. It is widely used in chain stores, supermarkets, shopping malls and other
places.
2. Electrical parameters
Power supply mode
DC5V 1A
Working Current
Sleep standby mode
≤130mA
Playing mode
≤450mA
Audio Format
MP3
Bit Rate: 16~320Kbps
Audio Output
8Ω/2W(typical value)
Volume
≥100dB
Infrared Induction Range
≥4 meters
Operating Temperature
-20-33℃

Shenzhen Waytronic Electronics Co., Ltd WT-X22
2
3. Appearance introduction
3.1 Button function
Button name
Operation
Function
On-off button
Switch
Turn on/off
A button
Short press
Next audio（all loop）
Long press 3 seconds
Single playing mode（Red light flashes 3 times）
B button
Short press
Volume adjust（1-8 level）
Long press 3 seconds
All loop playing mode（Red light flashes 3 times）
3.2 LED function
LED color
function
Working condition
Red
Playing
Red LED on when playing,off when finish
playing
Blue
WiFi did not
connect
The blue LED keeps on
WiFi connected
The blue LED flashes
Audio update
The blue LED flashes in a fast speed
4. Audio update by USB cable
Use USB cable connected with computer and followed the instruction to named the audio file
5. Installation
5.1 Bracket assembly
LED indicator
PIR sensor
B button
A button
Speaker
Micro USB
On/off button
Bracket

Shenzhen Waytronic Electronics Co., Ltd WT-X22
3
5.2 Installation diagram
①Fixed on the door
② Side installation
③Aisle installation

Shenzhen Waytronic Electronics Co., Ltd WT-X22
4
Notice:
1. Too high temperature (≥33℃) will affect the sensing distance and sensitivity.
2. The air conditioner and the fan facing the sensor head will affect the sensing distance and sensitivity.
5. Web server instruction
5.1 How to connect WiFi
①Use USB cable connect with the unit and computer, open the folder named ”WiFi setting”, entered the
right WiFi name and password
②Installed the unit in the WiFi connected area then power on the unit, it will connect the WiFi automatically,
blue LED will flash when connected successfully.
5.2 How to register an account on serve?
Enter into the website and fill in the relevant information
Link:http://en.sound.waytronic.com/index.jsp
5.3 How to create group
On the “Group management” page, click "Add A Group" and fill in the group name, contact person, contact
information, etc.

Shenzhen Waytronic Electronics Co., Ltd WT-X22
5
Step 1
Step 2
5.4 How to connect with the unit
①Enter into the “Device management” page and click single add
②Fill in the corresponding device ID (product back), device name, grouping and other information

Shenzhen Waytronic Electronics Co., Ltd WT-X22
6
5.5 How to upload audio by WiFi?
①Change the name of the voice to A000-AXXX (such as A001, A002), and click "Add Audio " in " Upload
MP3 Sound files" page
②First click "Add File" to select the voice then click "Start upload", latter click "Submit", which means the
audio has upload to the serve.
③Click "Upload device information" to select the unit that needs to be upgraded audio, then click the
"Upgrade" button and enter into the upgrade password (for example, the login password is 12345, upgrade
password is 123452345, the last four words is added)
④After entering the password, it will automatically enter to the voice selection interface, click the
corresponding voice then click “upgrade”
⑤After entering the password, it will automatically enter to the voice selection interface, choose the audio
and click “upgrade”

Shenzhen Waytronic Electronics Co., Ltd WT-X22
7
⑥After the upgrade is completed, it will shows "updated". If there is no prompt for more than 2 minutes,
please refresh the web page manually to view the results
5.6 How to set timing play?
① Click "Device upload" to select the unit that needs to be upgraded, and then click the "timing setting"
and enter the upgrade password enter into the upgrade password (for example, the login password is 12345,
upgrade password is 123452345, the last four words is added)
②Enter the timing page and click the "Add a group" and fill in the information like days, time, working mode,
cycle interval time, audio, and volume. (The timing group can set a total of 20 groups, the interval time cannot be
less than) After setting, click "Send Timing"
③Delete timing group
6. FAQ
Problem
Solution
Can't trigger to play voice
1. Please confirm whether the product has adjusted the sound to the
minimum.
2.Please confirm whether it is within the timing range.
3.Please refresh the webpage to confirm whether the unit is being

Shenzhen Waytronic Electronics Co., Ltd WT-X22
8
7. Accessories
Disclaimer
Shenzhen Waytronic Electronics Co., Ltd. reserves the right to modify the use of materials without notifying
customers. The new product specifications will be subject to the latest version of the usage data.
upgraded (cannot trigger playback during the upgrade)
The unit is offline
1.After installation and power on, it will be connected to the network in
about 15-20 seconds,
2. Please confirm whether the IMEI number entered is correct.
3. Please refresh the webpage, then check whether the product is
online.
Update 3 voices but the last one
cannot be played
The audio name should be in sequence,for example, if the code is
changed to A001, A002, and A004, the coded voice after A002 cannot
be played during playback.
Unrecognized removable disk
1. Please confirm whether the USB cable with data transfer function.
2. Confirm whether the data line is in good contact (please try to
re-plug).
Name
Quantity
Host
1 pcs
Bracket
1 set
5V 1A USB adapter
1 pcs
USB cable
1 pcs
User manual
1 pcs
Contact Us
Shenzhen Waytronic Electronics Co., Ltd.
Tel: [phone]
Fax : [phone]
Website: https://www.waytronicmfg.com/
E-mail: [email protected]
Add:4/F,Building No.11,Fuan Robotics Industrial Park, Fuyong,Baoan
District,Shenzhen ,518103,Guangdong ,China