Weba Sport Kayak Ergometer User manual

KAYAK
ERGOMETER
Operating Instructions
(Rev 3.0)
Weba Sport und Med.- Artikel G bH
Liesneckgasse 6/1
1210 Vienna
Austria
Tel.: ++43 1 2723550
Fax: ++43 1 27235504
office@webasport.at
www.weba-sport.co

Kayak Ergometer Operational manual
2
www.weba-sport.com
Contents
Introduction ............................................................................................. 6
Step I - Unboxing ..................................................................................... 8
STEP II – Removing parts ......................................................................... 9
STEP III – Removing P C bands ............................................................. 10
STEP I – Opening KAYAK ...................................................................... 11
STEP – Opening the toolbox ............................................................... 12
STEP I – Removing screws ................................................................... 13
STEP II – Connecting parts ................................................................... 14
STEP III – Connecting parts .................................................................. 15
STEP IX – Releasing inner parts ............................................................. 16
STEP X – Managing inner parts .............................................................. 17
STEP XI – Release rubber bands ............................................................ 18
STEP XII - Seat ........................................................................................ 19
STEP XIII – Feet holder ........................................................................... 21
STEP X I – Paddle knots ........................................................................ 22
STEP X II – Paddle assembling .............................................................. 23
Adjustment of resistance ....................................................................... 24
Download android application WebaSportHub ………………………………….27

Kayak Ergometer Operational manual
3
www.weba-sport.com
Assembly Instructions
Before assembling, or using the Kayak ergometer, please read the following
instructions carefully. Manual contains important information for usage and
maintenance of the equipment, as well as for your personal safety. Keep these
instructions in a safe place for maintenance purposes or for ordering spare parts.
For your safety
Kayak ergometer should be used only for intended purpose, i.e. for
physical exercise.
Any other use of the equipment is prohibited and may be dangerous. The
manufacturer cannot be held liable for damage or injury caused by
improper use of the equipment.
Kayak ergometer has been designed in accordance to the latest standards
of safety. Any features which may have been a possible cause of injury
have been avoided or made as safe as possible.
Incorrect repairs and structural modifications (e.g. removal or
replacement of original parts) may endanger the safety of the user.
Damaged components may endanger your safety or reduce the lifetime of
the equipment. For this reason, worn or damaged parts should be
replaced immediately and the equipment taken out of use until this has
been done.
In case of enquiry for spare parts, please contact Weba-Sport.
If the equipment is in regular use, check all its components thoroughly
every 1-2 months. Pay particular attention to the tightness of bolts and
nuts.
Instruct persons using the equipment (in particular children) on possible
sources of danger during exercising.
Before beginning your program of exercise, consult your doctor to ensure
that you are fit enough to use the equipment. Base your program of
exercise on the advice given by your doctor. Incorrect or excessive
exercise may damage your health.
Our products are subject to a constant innovative quality assurance. We
reserve the right to perform technical modifications.

Kayak Ergometer Operational manual
4
www.weba-sport.com
Handling the equip ent
It is not recommended to use or store the apparatus in a damp room as
this may cause it to rust. Please ensure that no part of the machine comes
in contact with liquids (drinks, perspiration, etc.) This may cause
corrosion.
The Kayak Ergometer is designed for use by adults and children should not
be allowed to play with it. Children at play behave unpredictably and
dangerous situations may occur for which the manufacturer cannot be
held liable. If, in spite of this, children are allowed to use the equipment,
ensure that they are instructed in its proper use and supervised
accordingly.
The Ergometer complies fully with DIN EN 957 1/5, class SA. It is therefore
suitable for therapeutic purposes.
Please ensure that liquids or perspiration never enter the machine or the
electronics.
Do not use corrosive or abrasive materials to clean the equipment. Ensure
that such materials are not allowed to pollute the environment.
The equipment does not require any special maintenance. All bearings are
lubricated (further lubrication is not required).
Before use, always check all screws and plug-in connections, as well as if
respective safety devices fit correctly.

Kayak Ergometer Operational manual
5
www.weba-sport.com
Instructions for asse bly
Ensure that you have received all parts required and that they are not
damaged. If you have any cause for complaining, please contact Weba
Sport.
Before assembling the equipment, study drawings carefully and carry out
operations in the order shown by the diagrams. The correct sequence is
given in capital letters.
The equipment must be assembled with due care by an adult person. If in
doubt, call someone (technically talented, if possible) to help you.
Please note that there is always a danger of injury when working with tills
or doing manual work. Therefore please be careful when assembling this
machine.
Ensure that your working area is free of possible sources of danger, for
example don’t leave any tools lying around. Always dispose packaging
material in such a way that it may not cause any danger. There is always a
risk of suffocation of children play with plastic bags.
Bolt all the parts together loosely at first, and check if they have been
assembled correctly. Tighten the locknuts by hand until resistance is felt,
then use spanner to finally tighten nuts completely against resistance
(locking device). Then check that all screw connections have been
tightened firmly.
Please keep original packaging. It may be used for transport, if necessary.
For technical reasons, we reserve the right to carry out preliminary
assembly work.

Kayak Ergometer Operational manual
6
www.weba-sport.com
Introduction
Company Weba Sport has developed excellent product, which gives
recreational and top-athletes great opportunity to simulate the motion
stereotype of paddle sport for testing and training. The complexity of the
smooth and gentle motions increases the muscles strength and flexibility of the
upper body.
This product offers the optimal cardio-vascular training. Unlimited range
of resistance is given through air displacement turbine, which simulates water
fluid dynamics. This break system allows everyone to use Kayak ERGOMETER
regardless of their age or fitness-level. The load is regulated by the pulling effort.
There is additional mechanism for regulation of the fly wheel drag. The working
position is adjustable for all body heights.
The Kayak ERGOMETER is quality engineered by using heavy-duty
components. This ergometer could be disassembled in two parts for convenient
transportation or storage.
Kayak ERGOMETER

Kayak Ergometer Operational manual
7
www.weba-sport.com
Package Includes
KayakErgometer, Science model with app WEBASportHub
Operating instructions
Require ents
KayakErgometer, Science modell
Android 5 or bigger unit
BLE (bluetooth 4 vers.)

Kayak Ergometer Operational manual
8
www.weba-sport.com
Step I - Unboxing
Take your KAYAK ergometer out of the box and place it on a flat, clean
surface. Carefully remove plastic wrapping from the product. Read the warning
on top of the ergometer.
Unboxing your KAYAK your product out of the box. Place it on clean flat surface
and gently remove wrapping. Read the warning

Kayak Ergometer Operational manual
9
www.weba-sport.com
STEP II — Re oving parts
Remove all the parts from inside the KAYAK ergometer, one by one.

Kayak Ergometer Operational manual
10
www.weba-sport.com
STEP III — Re oving PVC bands
Cut the P C bands with the appropriate tool, on the upper side and on
the lower side of the Kayak ergometer. There are 4 P C bands in total that must
be cut. The last P C band is at the bottom and you should hold KAYAK
Ergometer to avoid sliding of parts.

Kayak Ergometer Operational manual
11
www.weba-sport.com
STEP IV — Opening KAYAK
Carefully hold one side of the Kayak ergometer and pull it in vertical
position. Then pull the bottom part of Kayak ergometer and put it in upward
position.

Kayak Ergometer Operational manual
12
www.weba-sport.com
STEP V — Opening the toolbox
Remove red ribbon that covers screws from both side of the KAYAK
ergometer. Open the white box that contains tools and get the blue Allan bolt
key.

Kayak Ergometer Operational manual
13
www.weba-sport.com
STEP VI — Re oving screws
Remove all four screws from all sides of your ergometer. Release the
screw from the front side of the KAYAK so that the tube is free for mounting the
top part of your ergometer.

Kayak Ergometer Operational manual
14
www.weba-sport.com
STEP VII — Connecting parts
Take back part of the ergometer and put it in the front part hole, as
shown on picture.

Kayak Ergometer Operational manual
15
www.weba-sport.com
STEP VIII — Connecting parts
Set screw on the back of the ergometer in position by using Allan bolt key.
Next thing you need to do is to tighten leveling Allan bolts by using Allan key.

Kayak Ergometer Operational manual
16
www.weba-sport.com
STEP IX — Releasing inner parts
Release rubber band strains and Allan bolts from the top of your
ergometer. Also, you need to remove safety strain from the bottom.

Kayak Ergometer Operational manual
17
www.weba-sport.com
STEP X — Managing inner parts
Set this part of your KAYAK Ergometer by using two bolts and Allan key. It
should look exactly like the one on the last picture.

Kayak Ergometer Operational manual
18
www.weba-sport.com
STEP XI — Release rubber bands
Release rubber band strains, in the middle and at the bottom of the
ergometer. BOTTOM ONES MUST BE RELEASED LAST!

Kayak Ergometer Operational manual
19
www.weba-sport.com
STEP XII - Seat
Pull the Kayak Ergometer bench down. Assemble the seat in its place by
using PIN. Use safety-β key to secure the seat height.
WARNING: NOT INSERTING SAFETY-β KEY CAN CAUSE SERIOUS INJURY!
Putting the PIN through a hole on the seat base and hole in seat pole will
put the seat in fixed position. Putting the PIN through a hole on the seat pole
and trench on a seat base will put seat in twisting position. Seat can now rotate
around the seat base.

Kayak Ergometer Operational manual
20
www.weba-sport.com
Table of contents
Popular Sport & Outdoor manuals by other brands

SPIETH America
SPIETH America POLARIS QUAD BAR Assembly and care instructions

Jump Power
Jump Power LT-6001-44HS Assembly, installation, care, maintenance and user instructions

SKLZ
SKLZ HOPZ Training guide

Polanik
Polanik PP-366 TECHNICAL SPECIFICATION INSTRUCTION MANUAL

BERG
BERG Rally BF-R user manual

Hathaway
Hathaway BG3141 manual