WebGate NVS04S Operation manual

Installation & User’s Guide
VS04S
(v 1.3)

Caution
As this equipment undergoes EMC registration and is suitable for business purpose, distributors and users
are aware of this point. This equipment is suitable except home.
FCC Com liance Statement
Caution : Any changes or modifications in construction of this de ice which are not expressly appro ed
the party responsible for compliance could oid the user's authority to operate the equipment.
OTE : This equipment has been tested and found to comply with the limits for a Class A digital
de ice, pursuant to part 15 of the FCC Rules. These limits are designed to pro ide reasonable protection
against harmful interference when the equipment is operated in a commercial en ironment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications,
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Warning
This is a class A product. In a domestic en ironment this product may cause radio interference in which
case the user may be required to take adequate measures
Warning
1. In case of changing built-in lithum battery, it should be replaced as same or kindred one to pre ent a
danger of explosion. Since old batteries could be a factor of en ironment contamination, be cautios to
treat them.
2. Do not throw the batteries to fire or heating. Neither short circuiut or disassembly is prohibited.
3. Do not charge the batteries pro ided with Remote Controller

Im ortant otice
1. Do not place hea y objects on the top of the product.
2. Product is for indoor use. It is not weatherproof. Use product with referring to its en ironmental
specifications (Temperature & Humidity). To clean the product, gently wipe the outside with a clean dry
cloth.
3. Product uses AC power of 110V ~ 240V. Be cautious not to cause electric damages to product.
4. Be careful not to drop the product. Physical shocks may harm the product including internal HDD. In
addition, be sure the product is secured after installation.
5. Product is made of metal. Therefore you can hurt human beings if you throw it to them or hit on them.
When installing product, be cautious to locate on safe places where children are unreachable.
6. If Product does not operate properly, please contact the closest WEBGATE distributor for after sales
ser ice. Tampering or disassembling the product will oid the warranty.
7. Security sur eillance laws may differ for each country. Therefore, please contact the local region first
to a oid any sur eillance law iolations.
The content of this manual can differ according to firmware or Software upgrading, and the standard and
appearance of products may be changed for the impro ement of quality without an ad ance notice.

4
Contents
Installation Guide ......................................................................................................................... 7
Overview ........................................................................................................................................ 7
1. Introduction ............................................................................................................................ 7
2. Main features .......................................................................................................................... 8
3. Su lied accessories ................................................................................................................ 9
4. Descri tion & Function ......................................................................................................... 10
Installation and Connection .......................................................................................................... 12
5. Connecting & Running ......................................................................................................... 12
5.1. Power connection and operation ....................................................................................... 12
5.2. Connect in Pri ate mode .................................................................................................. 12
5.3. Connecting in Public mode ............................................................................................... 14
6. Using Control Center ............................................................................................................ 15
6.1. Starting ........................................................................................................................... 15
6.1.1. PC system requirements for running Control Center .................................................... 15
6.2. Installing Control Center .................................................................................................. 15
6.3. Log-In ............................................................................................................................ 17
6.4. Monitor .......................................................................................................................... 18
6.5. Configuration Tool .......................................................................................................... 19
6.6. Playback ......................................................................................................................... 21
6.6.1. Open Back-up file and Unit ....................................................................................... 21
User’s Guide ............................................................................................................................... 22
7. Descri tion............................................................................................................................ 22
7.1. Rear Part ......................................................................................................................... 22
7.2. Front Part ........................................................................................................................ 22
7.3. Installation summary........................................................................................................ 23
8. VS04S Configuration .......................................................................................................... 24
8.1. Log in Configuration Tool ................................................................................................ 24

5
8.2. Interface ......................................................................................................................... 25
8.2.1. Site Tree .................................................................................................................. 25
8.2.2. Menu....................................................................................................................... 25
8.2.3. Configuration page ................................................................................................... 26
8.2.3.1. System Setting .................................................................................................. 26
8.2.3.2. IP Camera ........................................................................................................ 27
8.2.3.2.1. IP Camera Configuration ......................................................................................... 27
8.2.4. Time/Date ................................................................................................................ 31
8.2.4.1. Setting Date & Time .......................................................................................... 31
8.2.4.2. NTP Setup ........................................................................................................ 32
8.2.5. Connecti ity ............................................................................................................ 32
8.2.5.1. When using Ethernet ......................................................................................... 32
8.2.5.2. When using xDSL ............................................................................................. 33
8.2.5.3. WRS (Dynamic IP Registration Se er) ............................................................... 34
8.2.5.4. Setting Port ...................................................................................................... 35
8.2.5.5. Com Port .......................................................................................................... 36
8.2.5.5.1. Selecting de ice linking port ................................................................................... 36
8.2.5.6. Text ................................................................................................................. 37
8.2.5.7. Audio ............................................................................................................... 38
8.2.5.8. User Accounts .................................................................................................. 38
8.2.5.9. User Authority .................................................................................................. 39
8.2.5.10. IP Filtering ....................................................................................................... 40
8.2.5.11. Storage ............................................................................................................. 41
8.2.5.12. Setting Time Schedule ....................................................................................... 42
8.2.5.12.1. Setting Time Schedule ........................................................................................... 42
8.2.5.12.2. Setting Special Time .............................................................................................. 42
8.2.5.13. Relay/Buzzer/Email .......................................................................................... 43
8.2.5.14. Email ............................................................................................................... 44
8.2.5.15. Recording ......................................................................................................... 45
8.2.5.16. Alarm Recording .............................................................................................. 46
9. Web Viewer ........................................................................................................................... 47
9.1. LOGIN ........................................................................................................................... 47
9.1. User Connection setup ..................................................................................................... 47
9.2. Usable Browser ............................................................................................................... 50
9.3. Monitor .......................................................................................................................... 52

6
9.3.1. Screen di ision & Change of ideo location ............................................................... 52
9.3.2. Caption ................................................................................................................... 54
9.3.3. Stream ..................................................................................................................... 54
9.3.4. Rec Start .................................................................................................................. 55
9.3.5. Stop motion sa ing (Sa e As) .................................................................................... 55
9.3.6. Audio play (Listen) .................................................................................................. 55
9.3.7. Mo ing Playback ..................................................................................................... 55
9.3.8. Channel On/Off ........................................................................................................ 56
9.3.9. Sensor Indication ..................................................................................................... 56
9.3.10. Relay Operation ....................................................................................................... 57
9.3.11. E ent data ................................................................................................................ 58
9.3.12. Video Recording & recording Pause Video ................................................................. 58
9.3.12.1. Video Recording ............................................................................................... 58
9.3.13. Using PTZ ............................................................................................................... 59
9.3.13.1. Using Audio ..................................................................................................... 61
9.3.14. Closing Video Channel ............................................................................................. 61
9.4. Playback ......................................................................................................................... 62
9.4.1. Video Di ision & Changing Channel ......................................................................... 62
9.4.2. Image recording ....................................................................................................... 63
9.4.3. Printing ................................................................................................................... 63
9.4.4. Backup .................................................................................................................... 64
9.4.5. Web Monitor ............................................................................................................ 65
9.4.6. Channel On/Off ........................................................................................................ 65
9.4.7. Sa ing time & Checking Rec. Capacity ...................................................................... 66
9.4.8. Searching Calander .................................................................................................. 66
9.4.9. Functional function at the buttom of monitor .............................................................. 66
Extension ..................................................................................................................................... 68
10. HDD Re lacement ............................................................................................................. 68
11. Cascade Configuration ...................................................................................................... 69
11.1. Cascade Connection ..................................................................................................... 69
APPENDIX .................................................................................................................................. 70
#1. How to recognize manufacturing date................................................................................ 71
#2. S ecification ...................................................................................................................... 72

7
Installation Guide
Overview
1. Introduction
NVS04S is a Network Video Storage which records and keeps data with massi e and high resolution
for long term peorid by connection with MPEG-4 typed IP Camera, Ser er, HD products. In addition
this de ice has expandable storage capacity upto maximum 32TB through cascading additional 8
NVS04R using Cascade Network Port.
Connect the Pri ate port and IP Camera of NVS04S using Ethernet cable and turn on the power. Then it
is automatically connected without additional operation. Basic operation and configuration is controlled
and managed using bundle softward Control Center.

8
2. Main features
□ 16 channel IP ideo and audio supported.
□ Maximum D1, 480ips recording is a ailable.
□ Maximum 32TB supported file system.
□ Supports 4 SATA Hot Swap Bay
□ Recording speed 10MB per second
□ Various Recording and playback condition
□ Total 16 network sensor and relay
□ Compatible with RTSP camera (Axis, Arecont)
□ Sa e Audio data
□ Web iewer
□ Compatible with H.264 Camera for connection and storage
□ Sa e Text and Search
□ MD search function
□ Static IP(DHCP, Dynamic IP) (xDSL, cable modem user)
□ Embeded Linux OS selected for stability and efficiency
□ Total additional 8 units ia Cascade Network Port
□ Total 16 NVS04S Control Center are a ailable to register (PC user interface
[Total 256 channels (16 NVS04S x 16 channel) controlled by single program]
<ote>
1. Following functions will be available shorlty
-. Total ex ansion ca acity u to 8 unis (32TB) VS04R by Cascading etwork Port
-. Private mode function

9
3. Su lied accessories
Unpack and check all the items as below;
1. NVS04S (1EA)
2. AC power code (1EA)
3. RACK fixing kit (1SET) 4. R-HDD fixing screw (16EA)
5. Gigabit Ethernet Cable (1EA)
6. CD-ROM (MANUAL)(1)

10
4. Descri tion & Function
front
(1) LED
(2) Hard disk rack
(3) Rack separation button

11
rear
(1) AC power connector
(2) Set ID rotary swith (Not Used)
(3) Mode switch (Not Used)
(4) RS232 connector (Text input)
(5) Alarm output connecting terminal (Not Used)
(6) Cascade or Pri ate connector (RJ45)
(7) LAN connector (RJ45)

12
Installation and Connection
5. Connecting & Running
5.1. Power connection and o eration
(1) Connect LAN port of NVS04S to the network connected IP Camera as below.
(2) It starts booting with power on.
<ote>
1. It takes around 1 minute to boot NVS04S.
2. While it sties connection, 4 LEDs on the front panel starts lighting and all of them starts
flickering and the user can check HDD list at Disk Manager.
5.2. Connect in Private mode
(1) Connect the Ethernet cable between the Lan port and PC.
(2) Connect pri ate port of NVS04 and hub connected to IP Camera
(3) Connect the power to IP camera after connecting AC power to NVS04S
(4) Execute Control Center Configuration Tool program at PC and configure the IP
camera connected to each channel.
(Refer the channel configuration with IP Camera at Configuration Tool at “8.1.3.2 IP Camera”)

13
<ote>
1. The user can connect Pri ate port and IP Camera directly.
2. IF the user configure the alue of “1. Cam ID” at IP Camera’s OSD menu to the rele ant channel
and it works.
3. When VS04S is connected to IP Camera v2.1.x.x, IP Camera changes its mode to recording
mode. Recording mode is limited to 2stream and the user can not change stream. When the user
wants to change stream at recording mode, the user needs to change saving configuration at the
recording channel of VS04S where the relevant IP camera is ma ed.
4. Version below IP Camera v2.1.x.x do not su ort recording mode and VS04S is not able to be
connected to it.
5. To change the mode from recording mode to normal mode, se arate VS04S from IP camera
and reboot.

14
5.3. Connecting in Public mode
(1) Connect Lan port to local network using Ethernet cable.
(2) Execute Control Center Configuration Tool program at PC and type the IP Address of IP camera
connected and ID, Password to connect it with NVS04S. (Refer the manual at “8.1.3.2 IP Camera” to
select channel of IP camera)
<ote>
1. One single NVS04S is a ailable to use Public and Pri ate mode using each port.
2. IP camera changes its mode from normal to recording mode when VS04S is connected with IP
Camera v2.1.x.x Recording mode is limited to 2stream and the user can not change stream.
When the user wants to change stream at recording mode, the user needs to change saving
configuration at the recording channel of VS04S where the relevant IP camera is ma ed.
3. Version below IP Camera v2.1.x.x do not su ort recording mode and VS04S is not able to be
connected to it.
4. To change the mode from recording mode to normal mode, se arate VS04S from IP camera
and reboot.

15
6. Using Control Center
Control Center List is a NVS04S Management Software and it makes NVS04S installtion & setting more
easier throguth a PC which is connected with NVS04S in Network. All configuration could be handled in
OSD menu of NVS04S without a PC, howe er, Control Center makes the complete setting more simply.
6.1. Starting
To do setting NVS04S through Control Center, PC and NVS04S should be connected ia Network and installed
Contorl Center Lite on the PC.
6.1.1. PC system requirements for running Control Center
Mininum Requirements Recommended Requirements
CPU Intel Pentium 4 / 3.0GHz Core2duo E6750 or higher
Memory 1GB 2GB or higher
Video Card 128MB 512MB or higher
Resolution 1280 x 1024 (with 32bit color) or higher
HDD recording
space 80GB or higher
OS Windows XP Professional / Window Vista Business
Etc. DirectX 9.0 or higher
6.2. Installing Control Center
1) Execute “2.x.x.x Setup.exe” file in Control Center Set up CD.
To install Control Center, user le el of the PC should be Administrator mode.

16
2) Click “I Agree” button to accept the license agreement
3) Select components which wish to install and press “Next” button.
“WESP SDK” must be installed.
Control Center
Essential program should be installed to monitor ia accessing Webeye.
Playback
Playback program should be installed to playback quick recording file.
Config
Webeye configuration program should be installed.
WESP SDK

17
WESP libruary file to be used at Webeye should be installed.
Schedule Backu
Sa ing program to store NVS04S’s data to sa e by schedule at PC should be installed.
Tools
MiniPlayer, Filecon erter, Onetime Password should be installed.
DirectX Setu
DirectX should be installed.
Startu ShortCut
Registering at Windows start program to be executed.
4) Click the “Install” button after selecting a directory to be insatalled.
6.3. Log-In
Enter User Name, Password and press “Ok” button.
The factory default alue : User Name:Administrator, Password:admin

18
6.4. Monitor
Click on the icone to execute “Control Center Monitor” program.
Drag and drop the unit located at Local Area Units to My Units or click on My Units and
select “Add Unit” from pop up menu and registering box pops up. Or select add menu at Tool bar.
(Please check if the Add menu is diabled prior to change it.)

19
Static IP unit registeration
In case of registering unit by "Add Unit", input IP address on the message box and select "Find" button.
If its port number of unit is not 80, press "Ad anced" and re ise it. "OK" button will be acti e when
taking ser er information by ser er searching precess. Input user ID/PW and press "OK" button.
Basic information such as address is carried by drag and drop from Local Area Units. Input User
information and press "OK" button.
Dynamic IP Unit registration
In case of using Dynamic IP, register in Registration Ser er and manage it. Select "Dynamic IP Address"
radio button and input Registration Ser er and Serial Number and press "Find" button.
If search is ok, register user information.
Input WRS group ID and Registration Ser er and press "Find by group ID". If search is ok, units will be
listed up. Select Unit and input user information.
Unit information change
When changing registered unit information, select unit and "Edit Unit" and Dialog box will be displayed.
Or select "Edit" menu. user can change port no. and user information.
Delete Unit
To delete the registered Unit, select Unit and “Delete Unit” in pop-up menu. Or select “Delete” in
Toobar.
<ote>
1. For more detailed function and user manual of Control Center, please, refer to the Contro Center Lite
User guide.
6.5. Configuration Tool
Click the icon on the desk top to run “Control Center Configuration Tool”.

20
<ote>
1. Configuration of NVS04S by Configuration Tool, please, refer to the chapter 7 user guide.