Wecan Technology and Lighting Co., Ltd WKY-BEAM12 Mounting instructions

UsemanualofledmovingBeam
Model: WKY-BEAM12
Wecan Technology and Lighting Co., Ltd
www.wecanlight.com
一． Technical Reference
Voltage: AC 90-240v, 50/60Hz
Power consumption: 150w
Lamp: CREE MEC 12w × 12PCS LED(RGBW 4 Into 1)
Channel: 11 CH / 15 CH
Control: DMX, master slave mode, auto mode, sound mode
Movement range: Pan: 450°/ Tilt: 270°
Carton Size: 267×254×304mm
Beam Angle:2°G.W.: 6.5kg
Display: TFT touch screen (Chinese / English menu)
二．Channel model
Channel mode
Channel 11 Channel 15 Channel
1 General dimmer General dimmer
2 Red dimmer Red dimmer
3 Green dimmer Green dimmer
4 Blue dimmer Blue dimmer
5 White dimmer White dimmer
6 user defined color dimmer user defined color dimmer
7 X X
8 Y Y
9 X fine（16Bit） X fine（16Bit）
10 Y fine（16Bit） Y fine（16Bit）
11 XY speed XY speed
12 Strobe
13 Auto, sound
14 Optional macro
15 ID code settings



Auto/Soundcontrol–Channel13

BIT EFFECT effects Remarks
0 No effects
1-25 Open controller delaying
26-50 Close controller delaying
51-90 Color choosing
91-130 Color pulsing
131-170 Color jumping
171-210 Color gradient
211-250 Internal program
251-255 Sound mode
Optionalmacro–Channel14
BIT EFFECT effects
0-255 Color speed for CH14 value(90-210)
0 No effects
1-20 R255 G↑ B0 W0
21-40 R↓ G255 B0 W0
41-60 R0 G255 B↑ W0
61-80 R0 G↓ B255 W0
81-100 R↑ G0 B255 W0
101-120 R255 G0 B↓ W0
121-140 R255 G↑ B↑ W0
141-160 R↓ G↓ B255 W0
161-170 R255 G255 B255 W255
171-200 R0 G0 B0 W0
201-205 R242 G204 B5 W227
206-210 R242 G215 B5 W227
211-215 R255 G255 B50 W255
216-220 R255 G255 B90 W255
221-225 R255 G255 B118 W255
226-230 R255 G255 B132 W255
231-235 R255 G255 B151 W255
236-240 R255 G255 B171 W255
241-245 R255 G255 B185 W255
246-250 R255 G255 B197 W255
251-255 R255 G255 B234 W255

IDcodesettings–Channel15

BIT EFFECT effects Remarks
0-9 ID code invalid
10-19 ID1
20-29 ID2
30-39 ID3
40-49 ID4
50-59 ID5
60-69 ID6
70-79 ID7
80-89 ID8
90-99 ID9
100-109 ID10
110-119 ID11
120-129 ID12
130-139 ID13
140-149 ID14
150-159 ID15
160-169 ID16
170-179 ID17
180-189 ID18
190-199 ID19
200-209 ID20
210-219 ID21
220-229 ID22
230-239 ID23
240-249 ID24
250-255 ID25

二． Menu description
Main menu Submenu
Fans speed（reserve）
Main menu
“Menu”: Back to previous interface
“Enter”: To operate function, start / exit to edit.
“UP” & “Down”: To operate function, start / exit to edit status.
Submenu
Address setting Setting DMX address from 001 to 512
Run mode DMX mode, auto mode, sound mode
DMX received DMX signal from Controller
Auto Automatically running
Sound Sound control
Screen saver（Close/mode 1/mode 2）
Address setting Address (1-512) Screen rotation（Yes/No）
Running mode Channel mode (15 channel / 11 channel) LOGO（Yes/No）
Auto mode (auto1 –auto8) Factory setting（Confirm?）
Sound mode Motors reset（Confirm?）
Test mode X（0-255）Screen correction（Confirm?）
Y（0-255）
Back
Red（0-255）
Green（0-255）
Blue（0-255）
White（0-255）
Language Chinese
English
Back
Advance ID code（0-25）
X inverse（Yes/No）
Y inverse（Yes/No）
Fader delay(Yes/No)
Signal connect（Yes/No）
Code wheel（Yes/No）
Temperature protect（Yes/No）
On timeSystem info
Running time
Soft version
Running mode
DMX Address
Temperature
Temperature（50℃- 120℃）

Test mode Setting the location of X/Y, Zoom, luminance of R.G.B.W
Can be set up the user defined color (CH6) depend on
adjusting luminance of R.G.B.W. color in this interface.
Language Chinese / English operation
Setting up
ID code The functions act on CH15. When the value
of CH15 correspond to the ID code, other
functions is valid, as the chart shows
Pan inverse: Rotating inversely
Tilt inverse: Rotating inversely
Fader delay It will be fade delayingly in dimmer
Signal link All of lamp off if disconnecting signal
Code wheel Automatically fixing correct location of
X/Y motors
Temp switch set
Temperature set
Fan speed Reverse
Screen saver Mode 1: it will show “001” in the screen
Mode 2: it will be blackout in the screen
Screen rotation: make the screen rotation 180°
LOGO Display LOGO (Yes / No)
Factory settings recover to factory settings
Reset motor reset.
Calibration Touch screen When the screen and touch screen have
skewing , can recalibrate
1 On time
2 Run time
3 Software version
4 Running model
5 Dmx address
6 Aluminum plate temperature
System information：