West Coast Pedal Board Little Rock Angled Series User manual

Thank you for your purchase. We’ve designed the Little Rock Series for years of reliable service. The Little Rock Series is great for players
of all levels, and is capable of housing professinal power supplies. We build these with the same high quality parts & materials as all of
our products. We truly appreciate your purchase and we hope this helps you create!
We are small company based in Sonoma County, California. We started out making only Custom products per our customers' specica-
tions. We took all of the most popular options and introduced our Standard Series . Our goal is to make high quality, hand made in the
USA pedal board systems that players of all levels can enjoy!
Whats Included:
Pedal Board and/or Case plus an Accessory Kit. The Little Rock accessory kit includes: this
instruction sheet, 1 foot of 1” loop velcro, a variety of black plastic cable straps and screws to
secure cables. Pedal Power supply brackets or Dual Lock is available through our online store.
If you have a Voodoo Lab Power Supply, then use the metal L brackets. All Strymon
power supplies use the Dual Lock kit.
Care & Genderal Info:
General:
As a good practice for any instrument, we recommend avoiding excess moisture or getting
your pedal board wet; it should be handled with the same care as other ne instruments. This
will ensure years of good looks and perfect function.
Coverings: Tolex & Tweed‘s :
Make sure ALL power to the board is fully disconnected before cleaning. All covering materials can be easily cleaned using warm soapy
water on a damp CLEAN cloth. Some of the materials are pourous and will absorb some of the cleaning solution; we recommend testing
your procedure on a small hidden section to make sure there is no discoloration after cleaning.
Hardwoods:
Make sure ALL power to the board is fully disconnected before cleaning. The benet of a nice hardwood,it that it can be easily touched
up to look new again. Depending on how much use it gets, will determine the care intervals. We use a hand rubbed poly urethane oil to
nish all our natural nish, wood boards. You can also use a tung oil or a butcher block oil to rejuvinate the nish after some time. We
suggest testing your preferred application on a hidden section on the bottom side. We like to use lint-free cloths using light coats and
polishing after a dry time with steel wool #0000. Allow to dry and continue use!
Pedal Board Deck:
The top portion of the pedal board receives most of the wear and tear. Our EXCLUSIVE material called Super Loop is a high-strength, no-
frizz velcro top deck material. When removing pedals, carefully slide a credit card underneath the pedal; seperating the pedal from the
deck. There are cable access slats to run power & patch cables from the top to the bottom of the board.
Audio Connectors:
The electronics package comes with 2 soldered cables and jacks. These are commonly used to plug the guitar into the board, and to feed
the amplier through the last pedal in your chain. These are very high quality and are covered under our limited life time warranty.
Power Access Hole:
On all the angled series Little Rocks, there is a power port access hole to plug in many types of pedal power devices. On the Nerd Series,
LITTLE ROCK ANGLED SERIES USER GUIDE
TOLEX & HARDWOOD aka THE NERD
PAGE 1 Ver 3.0 Standard Series Little Rock/Nerd - JULY 2nd 2019
PEDAL BOARD

PAGE 2 Ver 3.0 Standard Series Little Rock/Nerd - JULY 2nd 2019
PEDAL POWER DEVICE INSTALL
Setup:
Pedals: use the supplied velcro and attach the pedals to the board in the order in which you want them. Connect known working
patch cables and then proceeed to power them.
Power:
Using our mounting kits from westcoastpedalboard.com, you can use quickly and easily mount virtually any power supply on the under
side of the deck top. A dry run is always recommended prior to permanently fastening things down. Once you have the power supply
mounted, run the correct DC power cables to each pedal. Make sure everything powers up and works as expected. then use the supplied
cable straps and screws to securely fasten cables out of the way.
***The Voodoo lab power supplies use the metal L brackets and all Strymon supplies use Dual Lock. Usually 2’ is enough to get it done when
going the dual lock route!
Installation Examples
These images show proper power
supply installation utilizing a bracket
set and Dual Lock Before screwing the
power supply down, make sure there is
enough room to access all the pedal
power cables running to the pedals.
Use the included black plastic straps
and screws to secure the cabling to the
underside of the board; making sure all
cables are sucured as close to the
bottom of the board as possible.
SONOMA COUNTY, CA - USA | 707-836-7440 | WESTCOASTPEDALBOARD.COM