
Mounting with screws
1. Remove the back of the light by twisting counter clockwise.
2. Use the two holes in the back as a guide to drill pilot holes.
3. Secure the back to your mounting surface with included screws –
do not overtighten.
Warning
To reduce the risk of electrical shock, do not put the unit in water or other liquid. To clean, use a soft dry cloth.
Do not place or store pull-string light where it can fall or be pulled into a tub or sink.
Battery Precautions
1. Use only the size and type of batteries specified.
2. Always purchase the correct size and grade of battery most suitable for the intended use.
3. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium) batteries.
4. Replace all batteries of a set at the same time. Do not mix old and new batteries.
5. Do not dispose of batteries in fire.
6. Remove batteries if consumed or if product is to be left unused for an extended period of time.
7. Follow instructions for recycling for the batteries you use. (Lithium-ion batteries must be disposed
of at a household hazardous waste collection point (check with your local landfill) or
battery recycling drop off location, NOT placed in the trash.)
Limited Warranty
Under normal use and conditions, AmerTac provides to the original purchaser of
this product a one year limited express warranty that is set forth in the Limited
Warranty stated in full at www.amertac.com/warranties. The Limited Warranty
is in lieu of all other express or implied warranties or liabilities subject to the
exceptions explained fully in the Limited Warranty on the website.
©2021 AmerTac™
250 Boulder Dr.
Breinigsville, PA 18031
610-336-1330
www.amertac.com
Made in China
BO_TL_047_1120