Westinghouse L1928NV - 19" LCD Monitor User manual

TABLE OF CONTENTS
IMPORTANT PRODUCT SAFETY INSTRUCTIONS ...................................................................... 1
SAFETY GUIDELINES ............................................................................................................................... 2
FCC COMPLIANCE STATEMENT .............................................................................................................. 2
CLEANING THE LCD MONITOR............................................................................................................... 3
FEATURES .............................................................................................................................................. 4
POWER SAV E R ......................................................................................................................................... 4
PLUG & PLAY ......................................................................................................................................... 4
INSTALLATION ..................................................................................................................................... 5
PACKAGE CONTENTS............................................................................................................................... 5
FRONT VIEW OF THE LCD MONITOR ...................................................................................................... 6
REAR VIEW OF THE LCD MONITOR ........................................................................................................ 7
1. A
TTACHING THE BASE STAND TO THE LCD MONITOR ........................................................................ 8
2. CONNECT AUDIO AND VIDEO CABLES TO A PC ................................................................................... 8
3. CONNECT POWER CABLES .................................................................................................................. 9
4. TURN THE POWER ON......................................................................................................................... 9
MOUNTING THE MONITOR ON A WALL .................................................................................................. 10
OSD MENU FUNCTIONS...................................................................................................................... 11
IMAGE MENU ........................................................................................................................................ 12
AUDIO MENU ........................................................................................................................................ 13
COLOR MENU ....................................................................................................................................... 14
MISC MENU .......................................................................................................................................... 15
INFO MENU ........................................................................................................................................... 16
QUICK ADJUSTMENTS ........................................................................................................................... 17
DISPLAY MODES................................................................................................................................... 18
APPENDIX ............................................................................................................................................... 19
SPECIFICATIONS .................................................................................................................................... 19
TROUBLESHOOTING .............................................................................................................................. 20
No Power ......................................................................................................................................... 20
No Image.......................................................................................................................................... 20
Power is ON but No Screen Image .................................................................................................. 20
“Out Of Range”............................................................................................................................... 20
Fuzzy Image ..................................................................................................................................... 20
Image Too Bright or Too Dark .........................................................................................................20
Distorted Image ............................................................................................................................... 20
Image is Not Centered (size is not scaled correctly)........................................................................ 21
Colors are Not Correct .................................................................................................................... 21
No Sound.......................................................................................................................................... 21
Mounting the LCD Monitor on a Wall ............................................................................................. 21
Additional Questions........................................................................................................................ 21
English

IMPORTANT PRODUCT SAFETY INSTRUCTIONS
Follow and obey all warnings and instructions marked on the LCD Monitor. For your safety,
please read all the safety and operating instructions before you operate the LCD Monitor
Keep this user’s manual for future reference.
Overloading
Do not overload wall outlets, extension cords, or power strips. This can result in fire or
electronic shock.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them. Periodically inspect the cords and each end of the
cords for damage. The LCD Monitor shall be installed near a wall socket outlet and the
plug on power cord shall be readily accessible.
Ventilation
Slots and openings on the cabinet are provided for ventilation purposes. To ensure reliable
operation of the LCD Monitor and to protect it from overheating, these openings must not
be blocked or covered.
• Do not block the openings by placing the LCD Monitor on a bed, sofa, rug or other
similar surface.
• Do not place the LCD Monitor in a built-in installation such as a bookcase or rack
unless proper ventilation is provided and the manufacturer’s instruction have been
adhered to.
Other Notices
• Avoid exposing the LCD Monitor to direct sunlight or high temperatures.
• Avoid exposing the LCD Monitor to moisture or high humidity.
• Do not attempt repairs yourself. Your warranty does not cover repairs or attempted
repairs by anyone not authorized by Westinghouse Digital.
• If your LCD Monitor will not be used for a long period of time, unplug the LCD
Monitor.
Precautions
• Avoid touching the screen. Skin oils are difficult to remove.
• Never remove the rear cover. Your LCD Monitor contains high-voltage parts. You
may be seriously injured if you touch them.
• Avoid exposing your LCD Monitor to direct sunlight or another heat source. Orient
your LCD Monitor away from direct sunlight to reduce glare.
• Always handle your LCD display with care when moving it.
• Place your LCD Monitor in a well-ventilated area; don’t place the LCD Monitor in
airtight compartments. Do not place anything on your LCD Monitor that prevents
heat dissipation.
• Ensure that the area around the LCD Monitor is clean and free of moisture.
• Do not place heavy objects on the LCD Monitor, audio/video cables, or power cord.
• If the LCD Monitor emits smoke, abnormal noise, or a strange odor, immediately
turn it off and contact the Westinghouse Service Center.
• WARNING – To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose
The LCD Monitor To Rain Or Moisture! The LCD Monitor shall not be exposed to
dripping or splashing and objects filled with liquids, such as vases, shall not be
placed on the Monitor.
English
1

Safety Guidelines
CAUTION: The power supply outlet should be located near the LCD Monitor and should be easily accessible.
Always use the appropriate AC cord that is certified for your specific country. Some examples are listed
below:
USA..................UL Switzerland .........SEV
Canada.............CSA Britain .................BASE/BS
Germany..........VDE Japan .................Electric Appliance Control Act
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The specific power cord for this LCD Monitor is enclosed and has been selected according to the country of
destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to
replace the original cord set, or if the cord set is not enclosed. The female receptacle of the cord set must
meet IEC-60320 requirements and should look like Figure A1 below:
Figure A1 Figure A2
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA
Labeled. For LCD Monitors that are placed on a desk or table, type SVT or SJT cord sets may be used. For
LCD Monitors placed directly on the floor, only SJT type cord sets may be used. The cord set must be
selected according to the current rating for the LCD Monitor. Please consult the table below for the selection
criteria for power cords used in the United States and Canada.
Cord Type Size of Conductors in Cord Maximum Current Rating of Unit
SJT
18 AWG
16 AWG
14 AWG
10 Amps
12 Amps
12 Amps
SVT 18 AWG
17 AWG
10 Amps
12 Amps
FCC Compliance Statement
This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may
cause harmful interference to radio communications if not installed and used in accordance with the
instructions. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the LCD Monitor and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the Westinghouse Service Center or an experienced radio/Monitor technician for assistance.
FCC Warning
To assure continued FCC compliance, the user must use a grounded power supply cord and the provided
shielded video interface cable with bonded ferrite cores. If a BNC cable used, use only a shielded BNC (5)
cable. Also, any unauthorized changes or modifications not expressly approved by Westinghouse Digital will
void the user's authority to operate this device.
English
2

Cleaning the LCD Monitor
ʳ
• MAKE SURE THE LCD MONITOR IS TURNED OFF
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass
cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-
abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
Westinghouse Digital does not recommend the use of any ammonia or alcohol-based cleaners on
the LCD Monitor screen or case. Some chemical cleaners have been reported to damage the
screen and/or LCD Monitor case. Westinghouse Digital will not be liable for damage resulting from
the use of any ammonia or alcohol-based cleaners.
English
3

FEATURES
• Bright Display Image
• Lightweight
• Ultra Fast Response Time
• Stereo Speakers
• Power Saver
• Kensington Security Lock Compatible
• Safety Certifications
Power Saver
A power control system, Power Saver, is installed inside the LCD monitor.
If the LCD monitor has not been used for a certain period of time, the
system will turn the LCD monitor to low voltage mode to save electrical
power. Sli
g
ht movement of the mouse or pressin
g
any key on the keyboard
will return the original screen image. You can use your PC to set the
function.
The LCD monitor is compatible with EPA ENERGY STAR and NÜTEK if
used with a VESA DPMS computer. To save power, turn off the LCD
monitor power when not in use.
Plug & Play
VESA Plug and Play eliminates the complicated and time-consuming
installation process. Your computer system will identify and automatically
adjust the LCD monitor. The LCD monitor uses Display Data Channel
(DDC) to send Extended Display Identification Data (EDID) to the
computer system, so the computer system can automatically adjust the
LCD monitor.
English
4

INSTALLATION
Congratulations on your purchase of a Westinghouse 19” LCD Monitor. Sleek and
practical, this lightweight and wall-mountable LCD monitor delivers a crisp and clear
display optimized for 1280 x 1024 display resolution.
Package Contents
Your product package includes:
• 19” Westinghouse LCD Monitor
• Detachable Base Stand
• AC Power Cord
• VGA (HD15) Male – Male Cable
• 3.5 mm Male – Male Stereo Audio Cable
• User’s Manual
• Warranty Card
English
5

Front View of the LCD Monitor
Use the buttons on the front of the LCD Monitor to display the On Screen Display (OSD).
The OSD controls are defined in “OSD Functions” on page 11.
1. Turbo/ϧ• Switch between picture, text and economy modes.
• Move a selection up when the OSD is displayed.
2. Auto/ϰ
• Automatically optimize positions, phase, and clock when the OSD
is not displayed.
• Move a selection down when the OSD is displayed.
3. /• Quick contrast adjustment or decrease contrast/brightness.
• Move a selection left when the OSD is displayed.
4. /• Quick brightness adjustment and increase contrast/brightness.
• Move a selection right when the OSD is displayed.
5. • Enter and exit the OSD menu
6.
• Power On and Off button and indicator LED.
• Blue: Normal
• Orange: Power Saving
• Off: Power Off
7. Speakers • Audio Output.
77
123
6
5
4
English
6

Rear View of the LCD Monitor
1. AC IN (Power) • Connect the power cord from AC IN to a power
source.
2. Audio-IN • Using the cable provided, connect to the Audio out
(Green) from a computer.
3. DVI-D
• Using a 24-pin DVI cable, connect to a computer or
other device with a DVI output.
4. D-SUB (VGA) • Use the enclosed 15-pin VGA cable, connect to a
computer or other device with a VGA output.
5. Lock Hole • For use with Kensington security locks.
1
23
4
5
English
7

Installation
1. Attaching the Base Stand to the LCD Monitor
Attach the base stand to the LCD monitor stand neck. Align the holes and tabs; press in
and snap into place. To remove the base stand, press the tabs on the bottom of the stand
neck and remove the base.
2. Connect Audio and Video Cables to a PC
Connect one or all of the following into the back of the LCD Monitor
IMPORTANT: Before beginning, make sure all devices are turned off.
AUDIO CONNECTION: Connect a stereo mini cable from the PC’s AUDIO-OUT port
to the AUDIO-IN port on the LCD Monitor.
DVI-D CONNECTION: Connect a Digital DVI cable from your PC to the LCD Monitor
DVI-D port. To plug a DVI cable into the port, remove the plastic cover below the port.
VGA CONNECTION: Connect an analog VGA cable from your PC VGA OUT port to
the LCD Monitor D-SUB port.
English
8

3. Connect Power Cables
Connect the AC power adapter cord to the LCD Monitor (to the connector labeled “AC-IN”)
and then connect the female AC power cord to the adapter. Plug the AC power cord into a
properly grounded AC outlet.
4. Turn the Power On
Press the power button on the front of the LCD monitor. The LED light will turn blue if a
signal input is detected or it will be orange if no input is detected.
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
English
9

Mounting the Monitor on a Wall
1. Remove the base from the LCD monitor.
2. Remove the plastic covers and screws to remove the LCD monitor stand neck.
3. Use the 100mm VESA hole pattern on the back of the monitor to secure a
Westinghouse Décor Wall Mount to the monitor and mount it on a wall.
English
10

Source
Resolution & Frequency
OSD Menu Functions
All the function settings for the LCD monitor are controlled via the control keys located on
the bottom part of the front panel. To display the OSD main menu, press the “Menu”
keypad button on the control keys. (Note: The OSD menu display will disappear
automatically after approximately 10 seconds, if no action is taken.)
The LCD monitor has been adjusted to optimal settings before shipment. Adjustments to
the monitor settings can be made using the OSD menu.
• Press the “Menu” button to display the OSD.
• Press the ▲or ▼button to select the function to be adjusted.
• Press the button to access the function to be adjusted.
• Press the ▲or ▼button to select the sub-function to be adjusted.
• Press the or buttons to change the current setting of the sub-function.
• To go back to the previous menu, press the button. Changes are saved
automatically.
• To exit the OSD menu press "Menu" again. It automatically will save any changes
that have been made.
NOTES:
• The OSD turns off several seconds after you stop pressing the buttons while
performing an adjustment.
• Any changes are automatically saved in memory when the OSD turns off. Turning off
the power should be avoided while using the menu.
• Adjustments for clock, phase, and positions are saved for each individual signal timing.
Except for these adjustments, all other adjustments have only one setting, which
applies to all signal timings.
• The icon color will change from blue to white when a function is selected.
The following is a list of the OSD sub-menus for the LCD monitor:
Audio Menu
Misc Menu
Image Menu
Info Menu
Color Temp. Menu
English
11

Image Menu
Function Description
Brightness Adjust the brightness of the screen.
Contrast Adjust the contrast of the image.
Sharpness Adjust the picture sharpness of low resolution pictures.
Clock Adjust the LCD monitor clock. (Optional)
Phase Adjust the LCD monitor phase. (Optional)
H. Position Move the image left or right on the screen. (Optional)
V. Position Move the image up or down on the screen. (Optional)
English
12

Audio Menu
Function Description
Volume Adjust the volume of the audio.
Mute Disable the audio.
English
13

Color Menu
Function Description
Color temp User/9300K/7500K/6500K/sRGB
Red Adjust red color.
Green Adjust green color.
Blue Adjust blue color.
English
14

Misc Menu
Function Description
Language English, Français, Italiano, Deutsch, Español, ֲء፿,亞խ
֮,᜗᧯խ֮,Русский,
OSD time-out Adjust OSD display time setting.
OSD position Move OSD display position to any one of the following 5
positions within the overall screen.
Reset Restore LCD monitor to factory settings.
Input Select Analog / Digital
Auto setting Adjust clock, phase and positions automatically. (Optional)
CM Engine Color Management Engine. (Optional)
3
1
5
2
4
English
15
䞲ῃ㠊

Info Menu
Function Description
Resolution Displays resolution.
Horizontal
frequency Displays horizontal frequency.
Vertical
frequency Displays vertical frequency.
English
16

Quick Adjustments
You can skip the Menu pages and display an adjustment scale directly by using the
following button operations:
• Brightness: Press the Brightness button when the Menu is not displayed.
• Contrast: Press the Contrast button when the Menu is not displayed.
• Auto Setting: Press the Auto button when the Menu is not displayed.
• Turbo: Press the Turbo button when the Menu is not displayed to switch between
picture modes.
English
17

Display Modes
The monitor backlighting can be controlled by using the Turbo button on the control
keypad. There are 3 modes: Economy, Text, and Picture. To toggle between these modes,
press the Turbo key until the mode you desire is selected. These modes automatically
change the backlighting levels between bright, brighter, and brightest.
1. Economy Mode – Reduced brightness
2. Text Mode – Normal
3. Picture Mode – High brightness
NOTES:
• Changing to a lower brightness mode can lessen eye fatigue.
• Change from Picture Mode to Text Mode when working with text.
• Change from Text Mode to Economy Modes when viewing the screen for long periods.
English
18