Westinghouse WH1000i Series User manual

2
DISCLAIMERS:
All information, illustrations and specifications in this manual are based on the latest information available at
the time of publishing. The illustrations used in this manual are intended as representative reference views only.
Moreover, because of our continuous product improvement policy, we may modify information, illustrations and/or
specifications to explain and/or exemplify a product, service or maintenance improvement. We reserve the right to
make any change at any time without notice. Some images may vary depending upon which model is shown.
ALL RIGHTS RESERVED:
No part of this publication may be reproduced or used in any form by any means – graphic, electronic or
mechanical, including photocopying, recording, taping or information storage and retrieval systems – without the
written permission of Westpro Power Systems, LLC.
California
Proposition 65 Warning
Certain components in this product and its
related accessories contain chemicals
known to the state of California to cause
cancer, birth defects or other reproductive
harm. Wash hands after handling.
California
Proposition 65 Warning
The engine exhaust from this product
contains chemicals known to the state of
California to cause cancer, birth defects
or other reproductive harm.

CONGRATULATIONS ON OWNING A WESTINGHOUSE
INVERTER
!DANGER
!This manual contains important instructions for operating this inverter. For your safety and the
safety of others, be sure to read this manual thoroughly before operating the inverter. Failure to
properly follow all instructions and precautions can cause you and others to be seriously hurt
or killed.
For Your Records:
Date of Purchase: Inverter Model Number:
Purchased from Store/Dealer: Inverter Serial Number:
Purchase Receipt: (retain your purchase receipt to ensure trouble-free warranty coverage)
Product Registration
To ensure trouble-free warranty coverage, it is important you register your Westinghouse inverter. You can register
your inverter by either:
1. Filling in the product registration form below and mailing to:
Product Registration
Westpro Power Systems, LLC
W237 N2889 Woodgate Road, Unit B
Pewaukee, WI 53072
2. Registering your product online at www.westpropower.com
To register your inverter you will need to locate the model number
and serial number. The serial number tag is located toward the
bottom of the inverter housing on the opposite side of the muffler.
Product Registration Form
PERSONAL INFORMATION INVERTER INFORMATION
First Name: Model Number:
Last Name: Serial Number:
Street Address: Date Purchased:
Street Address: Purchased From:
City, State, ZIP:
Country:
Phone Number:
E-Mail:
Model Number

5
TABLE OF CONTENTS
CONGRATULATIONS ON OWNING A WESTINGHOUSE INVERTER..............................................................3
For Your Records: .........................................................................................................................................3
Product Registration.....................................................................................................................................3
Product Registration Form............................................................................................................................3
SAFETY ....................................................................................................................................................................7
SAFETY DEFINITIONS ......................................................................................................................................7
SAFETY SYMBOL DEFINITIONS ......................................................................................................................7
GENERAL SAFETY RULES ...............................................................................................................................8
SAFETY LABELS AND DECALS – WH1000i...................................................................................................10
SAFETY LABELS AND DECALS – WH2000i SERIES.....................................................................................12
SAFETY LABELS AND DECALS – WH2000iXLT.............................................................................................14
UNPACKING ...........................................................................................................................................................16
UNPACKING THE INVERTER ..........................................................................................................................16
Components: ..............................................................................................................................................16
FEATURES .............................................................................................................................................................17
GENERAL INVERTER FEATURES – WH1000i ...............................................................................................17
CONTROL PANEL FEATURES – WH1000i......................................................................................................18
GENERAL INVERTER FEATURES – WH2000i SERIES .................................................................................19
CONTROL PANEL FEATURES – WH2000i SERIES........................................................................................20
GENERAL INVERTER FEATURES – WH2000iXLT .........................................................................................21
CONTROL PANEL FEATURES – WH2000iXLT................................................................................................22
OPERATION ...........................................................................................................................................................23
BEFORE STARTING THE INVERTER..............................................................................................................23
INVERTER PARALLELING OPERATION – WH2000iXLT ONLY......................................................................24
INITIAL OIL FILL...............................................................................................................................................25
WH1000i.....................................................................................................................................................25
WH2000i Series..........................................................................................................................................26
ADDING / CHECKING ENGINE FLUIDS AND FUEL.......................................................................................28
Checking and / or Adding Engine Oil..........................................................................................................28
Adding Gasoline to the Fuel Tank...............................................................................................................28
STARTING THE INVERTER .............................................................................................................................29
Using Efficiency Mode................................................................................................................................30
Resetting the Reset Breaker ......................................................................................................................30
STOPPING THE INVERTER.............................................................................................................................31
Normal Operation .......................................................................................................................................31
During an Emergency.................................................................................................................................31
MAINTENANCE......................................................................................................................................................32
MAINTENANCE................................................................................................................................................32
Maintenance Schedule...............................................................................................................................32
ENGINE OIL MAINTENANCE ..........................................................................................................................33
Engine Oil Specification..............................................................................................................................33
Checking Engine Oil – WH1000i ................................................................................................................33
Checking Engine Oil – WH2000i Series .....................................................................................................34
Adding Engine Oil – WH1000i ....................................................................................................................34
Adding Engine Oil – WH2000i Series.........................................................................................................35
Changing Engine Oil – WH1000i................................................................................................................35
Changing Engine Oil – WH2000i Series.....................................................................................................36
AIR FILTER MAINTENANCE............................................................................................................................36
Cleaning the Air Filter – WH1000i ..............................................................................................................36
Cleaning the Air Filter – WH2000i Series ...................................................................................................37
DRAINING THE FLOAT BOWL.........................................................................................................................38
WH1000i.....................................................................................................................................................38
WH2000i Series..........................................................................................................................................39
SPARK PLUG MAINTENANCE ........................................................................................................................39
CLEANING THE SPARK ARRESTOR ..............................................................................................................41
CLEANING THE INVERTER.............................................................................................................................41

6
TABLE OF CONTENTS
STORAGE.........................................................................................................................................................41
SERVICE PARTS..............................................................................................................................................44
WH1000i Service Parts ..............................................................................................................................44
WH2000i Series Service Parts ...................................................................................................................46
TROUBLESHOOTING ............................................................................................................................................48
TROUBLESHOOTING ......................................................................................................................................48

7
SAFETY
SAFETY DEFINITIONS
The words DANGER, WARNING, CAUTION and
NOTICE are used throughout this manual to highlight
important information. Be certain that the meanings of
these alerts are known to all who work on or near the
equipment.
!
This safety alert symbol appears
with most safety statements. It
means attention, become alert, your
safety is involved! Please read and
abide by the message that follows
the safety alert symbol.
!DANGER
Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
!WARNING
Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
!CAUTION
Indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE
Indicates a situation which can cause damage to the
inverter, personal property and/or the environment, or
cause the equipment to operate improperly.
OTE:N Indicates a procedure, practice or condition
that should be followed in order for the
inverter to function in the manner intended.
SAFETY SYMBOL
DEFINITIONS
Symbol Description
!Safety Alert Symbol
Asphyxiation Hazard
Burn Hazard
Burst/Pressure Hazard
Don’t leave tools in the area
Electrical Shock Hazard
Explosion Hazard
Fire Hazard
Lifting Hazard
Pinch-Point Hazard
Read Manufacturer’s Instructions
Read Safety Messages Before
Proceeding
Wear Personal Protective Equipment
(PPE)

8
SAFETY
GENERAL SAFETY RULES
!DANGER
Never use the inverter in a location
that is wet or damp. Never expose the
inverter to rain, snow, water spray or
standing water while in use. Protect
the inverter from all hazardous weather
conditions. Moisture or ice can cause a
short circuit or other malfunction in the
electrical circuit.
Never operate the inverter in an
enclosed area. Engine exhaust
contains carbon monoxide. Only
operate the inverter outside and away
from windows, doors and vents.
!WARNING
Voltage produced by the inverter could
result in death or serious injury.
• Never operate the inverter in rain or a
floodplain unless proper precautions
are taken to avoid being subject to
rain or a flood.
• Never use worn or damaged
extension cords.
• Always have a licensed electrician
connect the inverter to the utility
circuit.
• Never touch an operating inverter if
the inverter is wet or if you have wet
hands.
• Never operate the inverter in highly
conductive areas such as around
metal decking or steel works.
• Always use grounded extension
cords. Always use three-wire or
double-insulated power tools.
• Never touch live terminals or bare
wires while the inverter is operating.
• Be sure the inverter is properly
grounded before operating.
!WARNING
Gasoline and gasoline vapors are
extremely flammable and explosive
under certain conditions.
• Always refuel the inverter outdoors,
in a well-ventilated area.
• Never remove the fuel cap with the
engine running.
• Never refuel the inverter while the
engine is running. Always turn
engine off and allow the inverter to
cool before refueling.
• Only fill fuel tank with gasoline.
• Keep sparks, open flames or other
form of ignition (such as match,
cigarette, static electric source) away
when refueling.
• Never overfill the fuel tank. Leave
room for fuel to expand. Overfilling
the fuel tank can result in a sudden
overflow of gasoline and result in
spilled gasoline coming in contact
with HOT surfaces. Spilled fuel can
ignite. If fuel is spilled on the inverter,
wipe up any spills immediately.
Dispose of rag properly. Allow area
of spilled fuel to dry before operating
the inverter.
• Wear eye protection while refueling.
• Never use gasoline as a cleaning
agent.
• Store any containers containing
gasoline in a well-ventilated area,
away from any combustibles or
source of ignition.
• Check for fuel leaks after refueling.
Never operate the engine if a fuel leak
is discovered.

9
SAFETY
!WARNING
Never operate the inverter if powered
items overheat, electrical output drops,
there is sparking, flames or smoke
coming from the inverter, or if the
receptacles are damaged.
!Never use the inverter to power
medical support equipment.
Always remove any tools or other
service equipment used during
maintenance from the inverter before
operating.
NOTICE
Never modify the inverter.
Never operate the inverter if it vibrates at high levels,
if engine speed changes greatly or if the engine
misfires often.
Always disconnect tools or appliances from the
inverter before starting.

10
SAFETY
SAFETY LABELS AND DECALS – WH1000i
1
4
6
2
3
5
1
2
4
3
5
6
FRONT BACK
Figure 1

11
SAFETY
6
4
12
5
3
1
2
3
4
6
5
Figure 2

12
SAFETY
SAFETY LABELS AND DECALS – WH2000i SERIES
1
4
6
2
3
5
1
2
4
3
65
FRONT BACK
Figure 3

13
SAFETY
1
3
2
5
4
1
2
3
4
5
Figure 4

14
SAFETY
SAFETY LABELS AND DECALS – WH2000iXLT
1
4
6
7
2
3
5
1
2
7
3
65
FRONT BACK
4
Figure 5

15
SAFETY
1
3
2
5
4
1
2
3
4
5
Figure 6

16
UNPACKING
UNPACKING THE INVERTER
!CAUTION
Always have assistance when lifting
the inverter. The inverter is heavy;
lifting it could cause bodily harm.
!Avoid cutting on or near staples to
prevent personal injury.
Tools required – box cutter or similar device.
1. Carefully cut the packing tape on top of the carton.
2. Fold back top flaps to reveal the manual. Remove
the document and save it for reference.
3. Carefully cut two sides of the carton to remove the
inverter.
Components:
Tool Bag (1)
Screwdriver (1)
Bottle of SAE 15W-40 Oil (1)
(2000i only)
Oil Fill Bottle (1)

17
FEATURES
GENERAL INVERTER FEATURES – WH1000i
12
3
45
6
7
Figure 7
1 - Control Panel: Contains the reset breaker,
outlets and warning lights.
2 - Spark Plug Access Cover: Remove the
cover to service the spark plug.
3 - Recoil Handle: Pull to start the engine.
4 - Engine/Fuel Control Switch: Turns the
engine and the fuel on and off.
5 - Fuel Cap and Vent: Open the vent to run the
engine and close the vent when the engine is off.
6 - Engine Service Panel: Remove the panel to
access the engine for maintenance.
7 - Muffler and Spark Arrestor: Avoid contact
until the engine is cooled down. The spark
arrestor prevents sparks from exiting the
muffler. It must be removed for servicing.

18
FEATURES
CONTROL PANEL FEATURES – WH1000i
1
2
3
4
5
678
Figure 8 – Control Panel Features
1 - 120-Volt, 20-Amp Duplex Outlet (NEMA
5-20R): The outlet is capable of carrying a
maximum of 20 amps.
2 - Reset Breaker: If the inverter is overloaded,
the reset breaker will trip. The engine will
continue to run, but there will be no output
from the inverter. Unplug the devices and
reduce the load. Push in the reset breaker to
reset it.
3 - Choke Knob: Pull out to the ON position
to start the engine, and push in to the OFF
position once the engine is running.
4 - Efficiency Mode Switch: When turned to the
ON position, the engine will sense the load
needed and run at a slower RPM to save fuel.
5 - Ground Terminal: The ground terminal is used
to externally ground the inverter.
6 - Low Oil LED: The red light will come on
and the engine will shut down if the oil level
becomes low.You must add oil to the correct
level before the inverter can be restarted.
7 - Overload LED: The red light will come on if the
inverter is overloaded. Decrease the load before
restoring inverter operations.
8 - Output Ready LED: The light will be green
when the inverter is ready to be used.

19
FEATURES
GENERAL INVERTER FEATURES – WH2000i SERIES
1
2
3
4
5
6
7
9
8
Figure 9
1 - Control Panel: Contains the reset breaker,
outlets and warning lights.
2 - Choke Knob: Pull out to the ON position
to start the engine, and push in to the OFF
position once the engine is running.
3 - Recoil Handle: Pull to start the engine.
4 - Engine/Fuel Control Switch: Turns the
engine and the fuel on and off.
5 - Spark Plug Access Cover: Remove the
cover to service the spark plug.
6 - Engine Oil Fill/Drain Plug Service Panel:
Remove the panel to access the engine oil fill/
drain plug for maintenance.
7 - Air Cleaner Access Panel: Remove the panel
to access the air cleaner for maintenance.
8 - Fuel Cap and Vent: Open vent to run the engine,
and close the vent when the engine is off.
9 - Muffler and Spark Arrestor: Avoid contact until
the engine is cooled down.The spark arrestor
prevents sparks from exiting the muffler. It must
be removed for servicing.

20
FEATURES
CONTROL PANEL FEATURES – WH2000i SERIES
123
4
5
6
7
Figure 10 – Control Panel Features
1 - 120-Volt, 20-Amp Duplex Outlet (NEMA
5-20R): The outlet is capable of carrying a
maximum of 20 amps.
2 - Reset Breaker: If the inverter is overloaded,
the reset breaker will trip. The engine will
continue to run, but there will be no output
from the inverter. Unplug the devices and
reduce the load. Push in the reset breaker to
reset it.
3 - Efficiency Mode Switch: When turned to the
ON position, the engine will sense the load
needed and run at a slower RPM to save fuel.
4 - Output Ready LED: The light will be green
when the inverter is ready to be used.
5 - Overload LED: The red light will come on if
the inverter is overloaded. Decrease the load
before restoring inverter operations.
6 - Low Oil LED: The red light will come on
and the engine will shut down if the oil level
becomes low.You must add oil to the correct
level before the inverter can be restarted.
7 - Ground Terminal: The ground terminal is
used to externally ground the inverter.