Whirlpool EV209NBT Parts list manual

Upright Freezer
®
PRODUCT MODEL NUMBERS OVERALL DIMENSIONS
LOCATION REQUIREMENTS
EV161FZT
EV161NZT
EV181FZT
EV181NZT
EV185NXT
EV201NZT
EV209NBT
Because Whirlpool Brand policy includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. M06.009.0
04-29-10
3" (7.5 cm)
3" (7.5 cm)
Depth Cabinet Height Width
Model “A” “B” “C”
EV161FZT
EV161NZT
EV181NZT
EV185NXT
EV201NZT
EV209NBT
Door swing is right-fixed.
including
handle
A
C
B
EV181FZT
30 5/16”
31 5/16”
30.0”
32.0”
32.0”
32.0”
32.0”
61.0”
61.0”
67.0”
67.0”
67.0”
67.0”
67.0”
30.0”
30.0”
30.0”
30.0”
30.0”
30.0”
30.0”
Electrical: A 115 Volt, 60 Hz., AC only 15 or 20
amp fused (or circuit breaker), grounded electri-
cal supply is required. It is recommended that a
separate circuit serving only your freezer be
provided. Use an outlet that cannot be turned off
by a switch. Do not use an extension cord.
Water Supply: Connect the ice maker to a cold
water line with water pressure between 30 and
120 psi.
Shown with contoured door.
®
Allow at least 3 in. (7.5 cm) of air space at the top and on both sides of the freezer
and 1 in. (2.5 cm) between the back of the freezer and the wall. If the freezer is to
be against a wall, leave extra space on the hinge side so the door can open wider.
NOTE: This freezer may be installed side by side with another refrigerator or freezer.
Allow for a 3 in. (7.5 cm) clearance at the top and sides and a 1/4 in. (0.64 cm)
clearance between the appliances.
IMPORTANT: Do not install the freezer near an oven, radiator, or other heat source,
nor in a location where the temperature will fall below 40°F (5°C).