Whirlpool SF216LXSM2 User manual

STANDARDCLEANING
GASRANGE
For questions about features, operation/performance, parts,
accessories or service, call: 1-800-253-1301 or visit our website
at...www.whirlpool.com
ESTUFAAGASDE
LIMPIEZAESTANDAR
Para consultas respecto a caracteristicas, funcionamiento, rendimiento,
piezas, accesorios o servicio t6cnico, Ilame al: 1-800-253-1301
o visite nuestro sitio de internet en:
www.whirlpool.com
Table of Contents/Jndice ...................................... 2
W10203463B

TABLEOFCONTENTS
RANGE SAFETY ............................................................................. 3
The Anti-Tip Bracket .................................................................... 4
COOKTOP USE .............................................................................. 5
Cooktop Controls ......................................................................... 5
Surface Burners ........................................................................... 6
Griddle .......................................................................................... 6
Home Canning ............................................................................. 6
Cookware ..................................................................................... 7
ELECTRONIC OVEN CONTROL ................................................... 7
Display .......................................................................................... 7
Oven Indicator Lights ................................................................... 7
Start .............................................................................................. 7
Cancel/Off .................................................................................... 7
Clock ............................................................................................ 8
Tones ............................................................................................ 8
Fahrenheit and Celsius ................................................................. 8
Tim er............................................................................................. 8
Control Lock ................................................................................. 8
Oven Temperature Control .......................................................... 8
OVEN USE ....................................................................................... 9
Aluminum Foil............................................................................... 9
Positioning Racks and Bakeware ................................................ 9
Bakeware ...................................................................................... 9
Oven Vent ..................................................................................... 9
Baking and Roasting .................................................................. 10
Broiling ........................................................................................ 10
RANGE CARE ............................................................................... 11
General Cleaning ........................................................................ 11
Oven Light .................................................................................. 12
Oven Door .................................................................................. 12
Removing the Oven Bottom ...................................................... 12
TROUBLESHOOTING .................................................................. 13
ASSISTANCE OR SERVICE ......................................................... 15
In the U.S.A................................................................................ 15
Accessories ................................................................................ 15
WAR RANTY .................................................................................. 16
INDICE
SEGURIDAD DE LA ESTUFA ....................................................... 17
El soporte antivuelco .................................................................. 18
USO DE LA SUPERFIOIE DE COOClON .................................... 20
Controles de la superficie de coccion ....................................... 20
Quemadores de superficie ......................................................... 21
Comal ......................................................................................... 21
Enlatado casero .......................................................................... 21
Utensilios de cocina ................................................................... 22
CONTROL ELEOTRONICO DEL HORNO ................................... 22
Pantalla ....................................................................................... 22
Luces indicadoras del horno ...................................................... 22
Start (Inicio)................................................................................. 22
Cancel/Off (Cancelar/Apagar) .................................................... 22
Reloj............................................................................................ 23
Tonos .......................................................................................... 23
Fahrenheit y centigrados ............................................................ 23
Temporizador ............................................................................. 23
Bloqueo del control .................................................................... 23
Control de temperatura del horno .............................................. 23
USO DEL HORNO ......................................................................... 24
Papel de aluminio ....................................................................... 24
Posicion de las parrillas y los utensilios para hornear ............... 24
Utensilios para hornear .............................................................. 24
Ducto de escape del horno ........................................................ 25
Como hornear y asar.................................................................. 25
Como asar .................................................................................. 25
CUlDADO DE LA ESTUFA ........................................................... 26
Limpieza general ........................................................................ 26
Luz del homo .............................................................................. 28
Puerta del horno ......................................................................... 28
Como quitar el rondo del horno ................................................. 28
SOLUClON DE PROBLEMAS ...................................................... 29
AYUDA O SERVIClO TI_CNICO ................................................... 31
En los EE.UU.............................................................................. 31
Accesorios .................................................................................. 31
GARANTIA ..................................................................................... 31
2

RANGESAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
WARNING: If the information in this manual is not followed exactly, a fire or explosion
may result causing property damage, personal injury or death,
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
or any other appliance.
-WHAT TO DO IF YOU SMELL GAS:
•Do not try to light any appliance.
•Do not touch any electrical switch.
•Do not use any phone in your building.
•Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
•If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service agency or
the gas supplier,
WARNING: Gas leaks cannot always be detected by smell.
Gas suppliers recommend that you use a gas detector approved by UL or CSA.
For more information, contact your gas supplier.
If a gas leak is detected, follow the "What to do if you smell gas" instructions.
State of California Proposition 65 Warnings:
WARNING: This product contains a chemical known to the State of California to cause cancer.
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

Therangewillnottipduringnormaluse.However,therangecantipifyouapplytoomuchforceorweighttotheopendoorwithoutthe
anti-tipbracketfasteneddownproperly.
Anti-Tip Bracket
\
Range Foot
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved.
See the installation instructions for details.
Failure to follow these instructions can result in death or serious burns to children and adults.
Making sure the anti-tip bracket is installed:
• Slide range forward.
•Look for the anti-tip bracket securely attached to floor.
•Slide range back so rear range foot is under anti-tip bracket.
IMPORTANT SAFETY iNSTRUCTiONS
WARNING: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the range, follow
basic precautions, including the following:
[] WARNING: TO REDUCE THE RISK OF TIPPING OF
THE RANGE, THE RANGE MUST BE SECURED BY
PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK
IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE
RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET
SECURELY ATTACHED TO FLOOR, AND SLIDE RANGE
BACK SO REAR RANGE FOOT IS UNDER ANTI-TIP
BRACKET.
[] WARNING: NEVER use this appliance as a space
heater to heat or warm the room. Doing so may result in
carbon monoxide poisoning and overheating of the oven.
[] WARNING: NEVER cover any slots, holes or passages
in the oven bottom or cover an entire rack with materials
such as aluminum foil. Doing so blocks air flow through the
oven and may cause carbon monoxide poisoning.
Aluminum foil linings may also trap heat, causing a fire
hazard.
[] CAUTION: Do not store items of interest to children in
cabinets above a range or on the backguard of a range -
children climbing on the range to reach items could be
seriously injured.
SAVE THESE
[] Proper Installation - The range, when installed, must be
electrically grounded in accordance with local codes or, in
the absence of local codes, with the National Electrical
Code, ANSl/NFPA 70. Be sure the range is properly
installed and grounded by a qualified technician.
[] This range is equipped with a three-prong grounding plug
for your protection against shock hazard and should be
plugged directly into a properly grounded receptacle. Do
not cut or remove the grounding prong from this plug.
[] Disconnect power before servicing.
[] Injuries may result from the misuse of appliance doors or
drawers such as stepping, leaning, or sitting on the doors
or drawers.
[] Maintenance - Keep range area clear and free from
combustible materials, gasoline, and other flammable
vapors and liquids.
[] Storage in or on the Range - Flammable materials should
not be stored in an oven or near surface units.
[] Top burner flame size should be adjusted so it does not
extend beyond the edge of the cooking utensil.
For self=cleaning ranges -
[] Before Self-Cleaning the Oven - Remove broiler pan and
other utensils. Wipe off all excessive spillage before
initiating the cleaning cycle.
INSTRUCTIONS

COOKTOPUSE
A
APAGADO APAGADO POWER
0 0_ OFF _@gVER
OFF 0 _o
MED PUSHTUTUBN
APAGADO
APAGADO 0 0 COMAL APAGADO 0 Q 0 0
NED PUSH TO TURN MED PUSH TU TURN MED
B C D
A.Surface burner Iocator
B.Left rear burner control knob
C.Left front burner control knob
E
D. Center burner control knob
E. Right rear burner control knob
F.Right front burner control knob
F
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
Electric igniters automatically light the surface burners when
control knobs are turned to LITE.
Before setting a control knob, place filled cookware on the grate.
Do not operate a burner using empty cookware or without
cookware on the grate.
To Set Burner Temperature:
1. Push in and turn knob counterclockwise to LITE.
All 4 surface burners will click. Only the burner with the
control knob turned to LITE will produce a flame.
2. Turn knob to anywhere between HI and LO. The clicking will
stop. Use the following chart as a guide when setting heat
levels.
SETTING RECOMMENDED USE
LITE • Light the burner.
HI • Start food cooking.
• Bring liquid to a boil.
MED (medium) • Hold a rapid boil.
• Quickly brown or sear food.
• Fry or saute foods.
• Cook soups, sauces and gravies.
• Stew or steam foods.
LO • Keep food warm.
• Simmer.
Power failure
In case of prolonged power failure, the surface burners can be lit
manually. Hold a lit match near a burner and turn knob
counterclockwise to LITE. After burner lights, turn knob to
setting.

5. Replacetheburnercap,makingsurethealignmentpinsare
properlyalignedwiththeburnercap.
_E
A. Burner cap
B. Afignment pins
C. Igniter
D. Burner base
E. Gas tube opening
IMPORTANT: Do not obstruct the flow of combustion and
ventilation air around the burner grate edges.
Burner cap: Always keep the burner cap in place when using a
surface burner. A clean burner cap will help avoid poor ignition
and uneven flames. Always clean the burner cap after a spillover
and routinely remove and clean the caps according to the
"General Cleaning" section.
Gas tube opening: Gas must flow freely throughout the gas tube
opening for the burner to light properly. Keep this area free of soil
and do not allow spills, food, cleaning agents or any other
material to enter the gas tube opening. Keep spillovers out of the
gas tube by always using a burner cap.
B
A. 1-11/2''(25-38 mm)
B. Burner ports
Burner ports: Check burner flames occasionally for proper size
and shape as shown above. A good flame is blue in color, not
yellow. Keep this area free of soil and do not allow spills, food,
cleaning agents or any other material to enter the burner ports.
To Clean:
IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Do not use oven cleaners, bleach
or rust removers.
1. Remove the surface burner grates.
2. Remove the burner cap from the burner base and clean
according to "General Cleaning" section.
3. Clean the gas tube opening with a damp cloth.
4. Clean clogged burner ports with a straight pin as shown. Do
not enlarge or distort the port. Do not use a wooden
toothpick. If the burner needs to be adjusted, contact a
trained repair specialist.
(
6.
7.
A. Incorrect
B. Correct
Replace the surface burner grates.
Turn on the burner. If the burner does not light, check cap
alignment. If the burner still does not light, do not service the
burner yourself. Contact a trained repair specialist.
o
IMPORTANT: To avoid damage to griddle, the griddle is to be
used on the center burner only and with low flame.
Before First Use:
Wash the griddle with warm soapy water. Rinse and dry
thoroughly. To avoid sticking, rub the surface with vegetable oil,
and wipe excess off with a paper towel.
• Do not leave empty griddle on a hot surface cooking area or
surface burner.
• Do not overheat the griddle. The nonstick coating could be
damaged.
• The griddle should not be used to bake, broil or microwave.
• To reduce spattering or grease spillover while cooking, avoid
cooking food with excess fat.
• To preserve durability, do not cut food on the griddle.
Avoid use of metal utensils.
When canning for long periods, alternate the use of surface
burners between batches. This allows time for the most recently
used areas to cool.
• Center the canner on the grate.
• Do not place canner on 2 surface burners at the same time.
• For more information, contact your local agricultural
department. Companies that manufacture home canning
products can also offer assistance.
6

IMPORTANT: Do not leave empty cookware on a hot surface
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides and a
well-fitting lid, and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop or grates. Aluminum and
copper may be used as a core or base in cookware. However,
when used as a base they can leave permanent marks on the
cooktop or grates.
Cookware material is a factor in how quickly and evenly heat is
transferred, which affects cooking results. A nonstick finish has
the same characteristics as its base material. For example,
aluminum cookware with a nonstick finish will take on the
properties of aluminum.
Cookware with nonstick surfaces should not be used under the
broiler.
Use the following chart as a guide for cookware material
characteristics.
COOKWARE CHARACTERISTICS
Aluminum • Heats quickly and evenly.
• Suitable for all types of cooking.
• Medium or heavy thickness is best for
most cooking tasks.
Cast iron
Ceramic or
Ceramic glass
• Heats slowly and evenly.
• Good for browning and frying.
• Maintains heat for slow cooking.
• Follow manufacturer's instructions.
• Heats slowly, but unevenly.
• Ideal results on low to medium heat
settings.
Copper • Heats very quickly and evenly.
Earthenware • Follow manufacturer's instructions.
• Use on low heat settings.
Porcelain • See stainless steel or cast iron.
enamel-on-
steel or cast
iron
Stainless steel • Heats quickly, but unevenly.
• A core or base of aluminum or copper
on stainless steel provides even
heating.
ELECTRONICOVENCONTROL
A B C D E F
_i' ii
©@
LUZDEHORNO RELOJ
OVEN LIGHT CLOCK
©
TEMPORIZADOR
TIMER
iiii i
_%
_i BAKE _ ASAR__RoL2
K J / H G
TEMPIHORA
TEMPIHOUR
A. Oven light G. Temp/hour
B. Clock H. Broil
C. Bake indicator light I. Bake
D. Display J. Broil indicator light
E. Start (control lock) K. Timer
F. Cancel/off
!i--
When power is first supplied to the appliance, a flashing time will
appear on the display. Press CANCEL/OFF to clear flashing time
from the display.
If flashing time appears, a power failure has occurred. Press
CANCEL!OFF and reset the Clock if needed.
When the oven is not in use, the display shows the time of day.
When performing a cook or timer function, the display will show
either hours and minutes, or minutes and seconds.
The indicator lights are located on both sides of the display. The
indicator lights light up or flash when the oven is in one of the
following modes: Bake, Broil or Timer.
The START pad begins any oven function. If the START pad is not
pressed within 5 seconds after pressing a function pad, the Push
to Start ("PSH") indicator light will flash and the push to start tone
will sound as a reminder.
If the START pad is not pressed within 1 minute after pressing a
function pad, the oven display will return to the time of day mode
and the programmed function will be canceled.
The CANCEL!OFF pad stops any function except the Clock,
Timer and Control Lock.

Thisisa12-hourclockanddoesnotshowa.m.orp.m.
To Set:
Before setting, make sure the oven and Timer are off.
1. Press CLOCK.
2. Press the TEMP/HOUR "up" or "down" arrow pads to set the
time of day.
3. Press CLOCK or START.
Tones are audible signals, indicating the following:
One tone
• Valid pad press
• Oven is preheated (long tone)
• Function has been entered
Three tones
• Invalid pad press
• Push to start reminder
Cycling tones
• End of cycle
The temperature is preset at Fahrenheit, but can be changed to
Celsius.
To Change: Press and hold BROIL for 5 seconds. A tone will
sound, and "C" will appear on the display. Repeat to change
back to Fahrenheit. To exit mode, press CANCEL/OFE
The timer can be set in hours or minutes up to 12 hours and
59 minutes, and counts down the set time either in hours and
minutes, or in minutes and seconds. The timer does not start or
stop the oven.
To Set:
1. Press TIMER. The timer indicator light will light up. If no
action is taken after 1 minute, the display will return to the
time of day, bake or broil mode.
2. Press the TEMP/HOUR "up" or "down" arrow pads to set the
length of time.
3. Press START.When the set time ends, end-of-cycle tones will
sound.
4. Press TIMER pad twice anytime to cancel the timer and
reminder tones.
If the CANCEL/OFF pad is pressed the oven will turn off and the
cook function will be disabled.
To display the time of day for 5 seconds when the timer is
counting down, press CLOCK pad.
If the START pad is not pressed within 5 seconds after pressing
the TIMER pad or TEMP/HOUR arrow pads, the "PSH" indicator
light will flash and the push to start tone will sound as a reminder.
The timer can be reprogrammed to change the time while it is
running.
To Reprogram:
1. Press TIMER.
2. Press TEMP/HOUR "up" or "down" arrow pads to adjust
time.
3. Press START.
The Control Lock function blocks the control panel pads to avoid
unintended use of cook functions.
When the control is locked, only the CLOCK set, OVEN LIGHT
and TIMER pads will function.
To Lock/Unlock Control: Before locking, make sure the cook
functions are off. Press and hold START for 3 seconds, and "Loc"
will appear on the display. Repeat to unlock. "Loc" will disappear
from the display.
IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door may cause the
burner cycling to give incorrect readings.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a minus sign means the oven will be
warmer by the displayed amount. Use the following chart as a
guide.
ADJUSTMENT °F COOKS FOOD
(ADJUSTMENT °C)
10°F (5°C) ...a little more
20°F (10°C) ...moderately more
30°F (15°C) ...much more
-10°F (-5°C) ...a little less
-20°F (-10°C) ...moderately less
-30°F (-15°C) ...much less
To Adjust Oven Temperature Calibration:
1. Press and hold BAKE for 5 seconds until the oven display
shows the current calibration, for example "00."
2. Touch the TEMP/HOUR "up" or "down" arrow pad(s) to
increase or to decrease the temperature in 10°F (5°C)
amounts. The adjustment can be set between 30°F (15°C)
and -30°F (-15°C).
3. Press START.
8

OVENUSE
Odors and smoke are normal when the oven is used the first few
times, or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off. Exposure to the fumes may result in death to
certain birds. Always move birds to another closed and well-
ventilated room.
The bakeware material affects cooking results. Follow
manufacturer's recommendations and use the bakeware size
recommended in the recipe. Use the following chart as a guide.
BAKEWARE/ RECOMMENDATIONS
RESULTS
IMPORTANT: To avoid permanent damage to the oven bottom
finish, do not line the oven bottom with any type of foil or liner.
• On those models with bottom vents, do not block or cover
the oven bottom vents.
• For best cooking results, do not cover entire rack with foil
because air must be able to move freely.
• To catch spills, place foil on rack below dish. Make sure foil is
at least 1/2"(1.3 cm) larger than the dish and that it is turned
up at the edges.
IMPORTANT: To avoid permanent damage to the porcelain
finish, do not place food or bakeware directly on the oven door or
bottom.
RACKS
• Position racks before turning on the oven.
• Do not move racks with bakeware on them.
• Make sure racks are level.
For best performance, cook on one rack. Place the rack so the
top of food will be centered in the oven. To move a rack, pull it
out to the stop position, raise the front edge, then lift out.
FOOD RACK POSITION
Large roasts, turkeys, angel food, bundt 1 or 2
and tube cakes, quick breads, pies
Yeast breads, casseroles, meat and 2
poultry
Cookies, biscuits, muffins, cakes 2 or 3
Light colored • Use temperature and time
aluminum recommended in recipe.
• Light golden crusts
• Even browning
Dark aluminum and • May need to reduce baking
other bakeware with temperatures slightly.
dark, dull and/or
nonstick finish • Use suggested baking time.
• Brown, crisp • For pies, breads and casseroles,
crusts use temperature recommended in
recipe.
• Place rack in center of oven.
Insulated cookie
sheets or baking
pans
• Little or no bottom
browning
Stainless steel
• Light, golden
crusts
• Uneven browning
Stoneware/Baking
stone
• Crisp crusts
Ovenproof
glassware, ceramic
glass or ceramic
• Brown, crisp
crusts
• Place in the bottom third of oven.
• May need to increase baking time.
• May need to increase baking time.
• Follow manufacturer's instructions.
• May need to reduce baking
temperatures slightly.
BAKEWARE
To cook food evenly, hot air must be able to circulate. Allow
2" (5 cm) of space around bakeware and oven walls. Use the
following chart as a guide.
NUMBER OF POSITION ON RACK
PAN(S)
1 Center of rack.
2 Side by side or slightly staggered.
3 or 4 Opposite corners on each rack. Make sure
that no bakeware piece is directly over
another.
A
A. Oven vent
The oven vent releases hot air and moisture from the oven, and
should not be blocked or covered. Blocking or covering the oven
vent will cause poor air circulation, affecting cooking and
cleaning results. Do not set plastics, paper or other items that
could melt or burn near the oven vent.

IMPORTANT:Toavoiddamagetotheinteriorfinish,donotplace
foodorcookwareontheovendoororovenbottom.
Beforebakingandroasting,positionracksaccordingtothe
"PositioningRacksandBakeware"section.
To Bake or Roast:
1. Press BAKE.
Press TEMP/TIME or TEMP/HOUR "up" or "down" arrow
pads to set a temperature other than 350°F (177°C) in 5°F
(3°C) amounts. The bake range can be set between 170°F
and 500°F (77°C and 260°C).
2. Press START or START/ENTER.
The temperature can be changed at any time after this step
by pressing the TEMP/TIME or TEMP/HOUR "up" or "down"
arrow pads. Start does not need to be pressed again. If
baking/roasting while the Timer is counting down, the set
baking/roasting temperature can be displayed for 5 seconds
by pressing BAKE.
3. Touch OFF/CANCEL or CANCEL/OFF when finished.
Preheating
After START is pressed, the oven will enter a timed preheat cycle.
The bake indicator light will light up. The Electronic Oven Control
automatically selects the preheat cycle time based on the oven
temperature selected. The cycle time will not change if the
temperature is reset before the cycle countdown ends. Preheat is
complete and the oven is ready to use when a 1-second tone
sounds, the cycle countdown ends, and the set temperature is
displayed.
Preheat temperatures are affected by varying factors such as
room temperature and peak energy usage times. It is normal for
the temperature showing on the display and the actual oven
temperature to differ.
Waiting an additional 10 minutes after the preheat time ends to
put food in the oven is suggested when baking foods with
leavening ingredients, such as yeast, baking powder, baking
soda and eggs.
BROILER
The broiler is located below the oven door. The broiler pan and
grid roll out for easy access. Always broil with the broiler drawer
and oven door closed.
• To avoid damage to the broiler, do not step on or apply
weight to the broiler door while it is open.
• Do not preheat broiler before use. Completely close broiler
drawer during broiling.
• Do not use broiler drawer for storage.
• Use only the broiler pan and grid. It is designed to drain juices
and help avoid spatter and smoke.
• For proper draining, do not cover the grid with foil. The
bottom of the pan may be lined with aluminum foil for easier
cleaning.
• Trim excess fat to reduce spattering. Slit the remaining fat on
the edges to avoid curling.
• Use tongs to turn food to avoid the loss of juices. Very thin
cuts of fish, poultry or meat may not need to be turned.
• After broiling, remove the pan from the oven when removing
the food. Drippings will bake on the pan if left in the heated
oven, making cleaning more difficult.
To Broil:
1. Open the broiler drawer and take out the broiler pan and grid.
2. Place food on the grid in the broiler pan at the desired broiling
position and close the drawer.
3. Touch BROIL.
The BROIL indicator light will light up.
4. Touch START.
The indicator light will light up. The temperature setting can
be changed at any time during broiling. If broiling while the
Timer is counting down, the set broiling temperature can be
displayed for 5 seconds by touching BROIL.
5. Touch OFF/CANCEL or CANCEL!OFF when finished broiling.
Positioning Broiler Pan
For models with a broiler drawer:
1. Make sure the oven is off and cool.
2. Hold each side of the broiler pan and set it at the desired
position on top of the supports at each corner. Depending on
the position desired it may be necessary to tilt the broiler
pan.
A B
3.
A. Broiler pan
B. Supports (4)
To remove the broiler pan, tilt the broiler pan and lift it out
from between the supports.
BROILING CHART
For best results, broiler pan should be rotated at the same time
the food is turned. Times are guidelines only and may need to be
adjusted for individual foods and tastes.
FOOD COOK TIME
Minutes
SIDE 1 SIDE 2
Chicken pieces, bone-in 15-17 15-17
Chicken breasts, boneless 11-13 11-13
Fish Fillets 1/2- 3/4"(1.25-1.8 cm) thick 7-8 3-4
Frankfurters 5-6 2-3
Ground meat patties 3/4"(1.8 cm) thick,
well-done* 11-13 6-7
Ham slice, precooked 1/2"(1.25 cm)
thick 6-8 3-4
Lamb chops 1" (2.5 cm) thick 14-17 8-9
Pork chops 1" (2.5 cm) thick 19-21 9-10
Steak 1" (2.5 cm) thick, medium rare, 10-12 5-6
medium 12-14 6-7
well-done 16-17 8-9
*Place up to 9 patties, equally spaced, on broiler grid.
10

RANGECARE
IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Always follow label instructions
on cleaning products. Do not wipe down any of the inside
surfaces until the oven has completely cooled down. To avoid
breaking the glass, do not apply a cool damp cloth to the inner
door glass before it has completely cooled.
Soap, water and asoft cloth or sponge are suggested first unless
otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire appliance is cool. These spills
may affect the finish.
Cleaning Method:
• Glass cleaner, mild liquid cleaner or nonabrasive scrubbing
pad:
Gently clean around the model and serial number plate
because scrubbing may remove numbers.
• All-Purpose Appliance Cleaner Part Number 31682 (not
included):
See "Assistance or Service" section to order.
COOKTOP CONTROLS
To avoid damage to the cooktop controls, do not use steel wool,
abrasive cleansers or oven cleaner.
To avoid damage, do not soak knobs.
When replacing knobs, make sure knobs are in the Off position.
On some models, do not remove seals under knobs.
Cleaning Method:
• Warm, soapy water:
Pull knobs straight away from control panel to remove.
CONTROL PANEL
To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths or abrasive paper
towels.
Cleaning Method:
• Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
• All-Purpose Appliance Cleaner Part Number 31682 (not
included):
See "Assistance or Service" section to order.
PORCELAIN-COATED GRATES AND CAPS
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the cooktop, grates and caps are cool.
These spills may affect the finish.
To avoid chipping, do not bang grates and caps against each
other or hard surfaces such as cast iron cookware.
Do not reassemble caps on burners while they are wet.
Cleaning Method:
• Nonabrasive plastic scrubbing pad and mildly abrasive
cleanser:
Clean as soon as cooktop, grates and caps are cool.
• Dishwasher (grates only, not caps):
Use the most aggressive cycle. Cooked-on soils should be
soaked or scrubbed before going into a dishwasher.
• Gas Grate and Drip Pan Cleaner Part Number 31617:
See "Assistance or Service" section to order.
GRIDDLE (on some models)
Oil or food residue should be cleaned as soon as the cooktop
and the griddle are cool. Do not allow grease to accumulate
under the griddle.
Cleaning the griddle in dishwasher can damage the nonstick
coating.
The use of abrasive cleaners, steel-wood pads or other abrasive
scrubbing pads can damage the nonstick coating.
Cleaning Method:
• Wipe with a dry soft cloth or soft paper towels to remove food
particles.
• Warm, soapy water or other cleaner safe for nonstick pans.
• Soft cloth or sponge.
If the griddle is washed, it will need to be coated again with
vegetable oil to preserve the nonstick finish as well as the
durability of the griddle.
SURFACE BURNERS
See "Surface Burners" section.
OVEN DOOR EXTERIOR
Cleaning Method:
• Glass cleaner and a soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
• All-Purpose Appliance Cleaner Part Number 31682 (not
included):
See "Assistance or Service" section to order.
OVEN CAVITY
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting or faint white spots can result.
On some models, the oven door can be removed. See "Oven
Door" first.
Cleaning Method:
• Steel-wool pad
• Oven cleaner: Follow product label instructions.
11

OVEN RACKS AND ROASTING RACKS
Cleaning Method:
• Steel-wool pad
BROILER PAN AND GRID (on some models)
Cleaning Method:
Wash in warm soapy water. (It is not recommended to wash the
chrome grid in a dishwasher.)
A mild abrasive cleaner and a plastic scrubber can be used to
remove stubborn stains.
For heavily soiled bowls, place an ammonia soaked paper towel
on the stains and allow to soak for a short time, then gently scrub
with a plastic scrubber.
Porcelain enamel only
• Warm soapy water or dishwasher
• Oven cleaner: Follow product label instructions.
The oven light is a standard 40-watt appliance bulb. When the
oven door is closed, press OVEN LIGHT to turn on the light.
Before replacing, make sure the oven and cooktop are cool and
the control knobs are off.
To Replace:
1. Unplug range or disconnect power.
2. Turn bulb counterclockwise to remove from socket.
3. Replace bulb.
4. Plug in range or reconnect power.
For normal range use, it is not suggested to remove the oven
door. However, if removal is necessary, make sure the oven is off
and cool. Then, follow these instructions. The oven door is heavy.
To Remove:
1. Open the oven door. Insert hinge pins, included with your
range, into both hinge hangers. Do not remove the pins while
the door is removed from the range.
2. Grasp the door on the sides with your fingers on the front of
the door and your thumbs on the inside surface.
To Replace:
1. Grasp the door on the sides with your fingers on the front of
the door and your thumbs on the inside surface.
2. Hold oven door so that the top edge of each door slot is
horizontal. Insert door hinge into the hinge slots.
3. Tilt top of door toward range. Insert bottom door hinge notch
down onto front frame edge.
4. Open the door completely and remove the hinge pins. Save
hinge pins for future use.
5. Close the door slowly to assure door side panel clearance
and proper hinge engagement.
The oven bottom can be removed for standard cleaning of the
oven.
Before cleaning, make sure the oven is completely cool.
To Remove:
1. Remove the oven racks.
2. Place fingers in the slots in the bottom panel.
;4
A. Lip
3. Lift the rear of the panel up and back.
The lip at the front of the panel should clear the front frame of
the oven cavity.
4. Lift the bottom up and out.
To Replace:
Reversethe steps above.
3. Pull door straight up, then toward you. Do not remove hinge
pins until the door is replaced on the range.
12

TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost ofan unnecessaryservice call.
Nothing will operate Surface burner makes popping noises
Electrical Shock Hazard
Plug into agrounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
•Is the power outlet properly wired and polarized?
Try another outlet to check for proper wiring and polarity.
• Is the power supply cord unplugged?
Plug into a properly grounded 3 prong outlet.
• Has a household fuse been blown, or has a circuit
breaker tripped?
Replace the fuse or reset the circuit breaker. If the problem
continues, call an electrician.
Is the main or regulator gas shutoff valve in the off
position?
See Installation Instructions.
Is the range properly connected to the gas supply?
Contact a trained repair specialist or see Installation
Instructions.
Surface burners will not operate
•Is this the first time the surface burners have been used?
Turn on any one of the surface burner knobs to release air
from the gas lines.
• Is the control knob set correctly?
Push in knob before turning to a setting.
•Are the burner ports clogged?
See "Surface Burners" section.
Surface burner flames are uneven, yellow and/or noisy
Are the burner ports clogged?
See "Surface Burners" section.
Are the burner caps positioned properly?
See "Surface Burners" section.
Is the air/gas mixture correct?
Contact a designated service technician to check the air/gas
mixture, or see the Installation Instructions.
Is propane gas being used?
The appliance may have been converted improperly. Contact
a trained repair specialist.
•is the burner wet?
Let it dry.
Gas range noises during Bake and Broil operations
Noises that may be heard during the Bake and Broil operations:
Whooshing, Poof, Clicking, Snaps, Pop
These sounds are normal operational noises that can be heard
each time the Bake or Broil burners ignite during the cycle.
• A pop can be heard when the gas valve is opening or cycling
on and will make a single pop when it snaps open from the
solenoid. It sounds similar to a suction cup being pulled off of
a piece of glass.
• The igniters will click several times until the flame is detected.
These are short clicking sounds like tapping a nail onto a
piece of glass.
• A whooshing or poof sound is heard when the Bake or Broil
burner ignites.
• On some models, a clicking sound can be heard when the
convection fan relay cycles on and off.
Cookware not level on cooktop
•Is the range level?
Level the range. See the Installation Instructions.
• Is the proper cookware being used?
Use cookware with a flat bottom. See "Cookware" section.
Excessive heat around cookware on cooktop
•Is the cookware the proper size?
Use cookware about the same size as the surface cooking
area, element or surface burner. Cookware should not extend
more than 1/2"(1.3 cm) outside the cooking area.
Oven will not operate
•Is the power outlet properly wired and polarized?
Try another outlet to check for proper wiring and polarity.
• Is this the first time the oven has been used?
Turn any one of the surface burner knobs on to release air
from the gas lines.
Is the electronic oven control set correctly?
See "Electronic Oven Control" section.
On some models, is the Oven Lockout set?
See "Oven Lockout" section.
Is the main or regulator gas shutoff in the off position?
Contact a designated service technician or see the
Installation Instructions.
Oven makes muffled ticking noise when in use
•This is normal and occurs when the oven burner cycles on
and off to hold the set oven temperature.
13

Oven burner flames are uneven, yellow, or noisy
•Is propane gas being used?
The appliance may have been converted improperly. Contact
a trained repair specialist.
• Is the air/gas mixture correct?
Contact a designated service technician to check the air/gas
mixture or see the Installation Instructions.
Oven temperature too high or too low
•Does the oven temperature calibration need adjustment?
See "Oven Temperature Control" section.
Display shows messages
•Is the display showing a flashing time?
There has been a power failure. Press CANCEL/OFF to clear
the display. Reset the clock, if needed. See "Clock" section.
•Is the display showing "F" followed by a number?
Press CANCEL!OFF to clear the display. If an "F" code
appears again, contact a trained repair specialist.
Cooktop cooking results not what expected
•Is the proper cookware being used?
See "Cookware" section.
•Is the control knob set to the proper heat level?
See "Cooktop Controls" section.
Baking results not what expected
•Is the range level?
Level the range. See the Installation Instructions.
• Was the oven preheated?
Wait for oven to preheat before placing food in oven.
• Is the proper oven temperature calibration set?
See "Oven Temperature Control" section.
Is the proper bakeware being used?
See "Bakeware" section.
•Are the racks positioned properly?
See "Positioning Racks and Bakeware" section.
• Is there proper air circulation around bakeware?
See "Positioning Racks and Bakeware" section.
• Is the batter evenly distributed in the pan?
Make sure batter is level in the pan.
• Are baked items too brown on the bottom?
Decrease oven temperature 10° F to 30°F (5°C to 15°C).
• Are crust edges browning early?
Use aluminum foil to cover the edge of the crust and/or
reduce baking temperature.
Slow baking or roasting
•Was the oven preheated?
Wait for oven to preheat before placing food in oven.
• Is there proper air circulation around bakeware?
See "Positioning Racks and Bakeware" section.
• Is the proper length of time being used?
Increase baking or roasting time.
• Is the proper temperature set?
Increase temperature by 25°F (15°C).
•Has the oven door been opened while cooking?
Oven peeking releases oven heat and can result in longer
cooking times.
Broiler burner fails to light
Is the ignition system broken?
Contact a designated service technician to replace it.
Has a household fuse been blown, or has a circuit
breaker tripped?
Replace the fuse or reset the circuit breaker. If the problem
continues, call an electrician.
14

ASSISTANCEORSERVICE
Before calling for assistance or service, please check
"Troubleshooting." It may save you the cost of a service call. If
you still need help, follow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If you need replacement parts
If you need to order replacement parts, we recommend that you
use only FSP®replacement parts. FSP®replacement parts will fit
right and work right because they are made with the same
precision used to build every new WHIRLPOOL ® appliance.
To locate FSP®replacement parts in your area, call us or your
nearest Whirlpool designated service center.
Call the Whirlpool Customer eXperience Center
toll free: 1-800-253-1301.
Our consultants provide assistance with:
• Features and specifications on our full line of appliances.
• Installation information.
• Use and maintenance procedures.
• Accessory and repair parts sales.
• Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
Referrals to local dealers, repair parts distributors and service
companies. Whirlpool designated service technicians are
trained to fulfill the product warranty and provide after-
warranty service, anywhere in the United States.
To locate the Whirlpool designated service company in your
area, you can also look in your telephone directory Yellow
Pages.
For further assistance
If you need further assistance, you can write to Whirlpool
Corporation with any questions or concerns at:
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
Stainless Steel Cleaner and Polish
(stainless steel models)
Order Part Number 31462
All-Purpose Appliance Cleaner
Order Part Number 31682
Gas Grate and Drip Pan Cleaner
Order Part Number 31617
15

WHIRLPOOLCORPORATIONMAJORAPPLIANCEWARRANTY
LIM ITED WARRANTY
For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or
furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter "Whirlpool") will pay for Factory Specified Parts
and repair labor to correct defects in materials or workmanship. Service must be provided by a Whirlpool designated service company.
This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the country in
which it was purchased. Outside the 50 United States and Canada, this limited warranty does not apply. Proof of original purchase date
is required to obtain service under this limited warranty.
ITEMS EXCLUDED FROM WARRANTY
This limited warranty does not cover:
1. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or
repair house fuses, or to correct house wiring or plumbing.
2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty
coverage.
3. Repairs when your major appliance is used for other than normal, single-family household use or when it is used in a manner that is
contrary to published user or operator instructions and/or installation instructions.
4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in
accordance with electrical or plumbing codes, or use of consumables or cleaning products not approved by Whirlpool.
5. Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage
results from defects in materials or workmanship and is reported to Whirlpool within 30 days from the date of purchase.
6. Any food loss due to refrigerator or freezer product failures.
7. Costs associated with the removal from your home of your major appliance for repairs. This major appliance is designed to be
repaired in the home and only in-home service is covered by this warranty.
8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
9. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an
authorized Whirlpool servicer is not available.
10. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance
with published installation instructions.
11. Major appliances with original model/serial numbers that have been removed, altered or cannot be easily determined. This warranty
is void if the factory applied serial number has been altered or removed from your major appliance.
The cost of repair or replacement under these excluded circumstances shall be borne by the customer.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED
HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. WHIRLPOOL SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE
TO PROVINCE.
If outside the 50 United States and Canada, contact your authorized Whirlpool dealer to determine if another warranty applies.
If you need service, first see the "Troubleshooting" section of the Use & Care Guide. After checking "Troubleshooting," you may find
additional help by checking the "Assistance or Service" section or by calling Whirlpool. In the U.S.A., call 1-800-253-1301. In Canada,
call 1-800-807-6777. 9/07
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Write down the following information about your major appliance
to better help you obtain assistance or service if you ever need it.
You will need to know your complete model number and serial
number. You can find this information on the model and serial
number label located on the product.
Dealer name
Address
Phone number
Model number
Serial number
Purchase date
16

SEGURIDADDELAESTUFA
Su seguridad y la seguridad de los demos es muy importante.
Hemos incluido muchos mensajes importantes de seguridad en este manual yen su electrodomestico. Lea y obedezca siempre
todos los mensajes de seguridad.
Este es el simbolo de advertencia de seguridad.
Este simbolo le llama la atenci6n sobre peligros potenciales que pueden ocasionar la muerte o una lesi6n a
usted y a los demas.
Todos los mensajes de seguridad iran a continuaci6n del simbolo de advertencia de seguridad y de la palabra
"PELIGRO" o "ADVERTENCIA". Estas palabras significan:
Si no sigue las instrucciones de inmediato, usted puede
morir o sufrir una lesibn grave.
Si no sigue las instrucciones, usted puede morir o sufrir
una lesibn grave.
Todos los mensajes de seguridad le diran el peligro potencial, le diran c6mo reducir las posibilidades de sufrir una lesi6n y Io que
puede suceder si no se siguen las instrucciones.
ADVERTENCIA: Si la informacion en este manual no se sigue con exactitud, podria
ocurrir un incendio o una explosion, Io que causaria dahos a propiedades, heridas
personales o la muerte.
-No almacene o use gasolina u otros liquidos y vapores inflamables cerca de este u otro
aparato electrodomestico.
- PASOS QUE USTED DEBE SEGUIR SI HUELE A GAS:
•No trate de encender ningun aparato electrodomestico.
•No toque ningun interruptor electrico.
•No use ningun telefono en su casa o edificio.
•Llame inmediatamente a su proveedor de gas desde el telefono de un vecino.
Siga las instrucciones de su proveedor de gas.
•Si usted no puede comunicarse con su proveedor de gas, Ilame al departamento
de bomberos.
- La instalacion y el servicio deben ser efectuados por un instalador calificado, una
agencia de servicio o por el proveedor de gas.
ADVERTENCIA: Las perdidas de gas no siempre se pueden detectar por el olfato.
Los proveedores de gas recomiendan que usted use un detector de gas aprobado por UL (Laboratorio de normalizaci6n) o
CSA (Asociaci6n canadiense de seguridad).
Para obtener mas informaci6n, p6ngase en contacto con su proveedor de gas.
Si se detecta una fuga de gas, siga las instrucciones de "Pasos que usted debe seguir si huele a gas".
17

Advertencias de la Proposici6n 65 del estado de California:
ADVERTENCIA: Este producto contiene una sustancia quimica identificada por el estado de California como causante de
cancer.
ADVERTENCIA: Este producto contiene una sustancia quimica identificada por el estado de California como causante de
defectos cong6nitos o algOn otro tipo de da_os en la funci6n reproductora.
La estufa no se voltearA durante el uso normal. Sin embargo, si usted aplica mucha fuerza o peso a la puerta abierta sin haber fijado
adecuadamente el soporte antivuelco, la estufa puede voltearse.
El soporte anti-vuelco
La pata trasera
Peligro de Vuelco
Un ni_o o un adulto puede volcar accidentalmente la estufa y resultar muerto.
Conecte el soporte anti-vuelco a la pata trasera de la estufa.
Si traslada de lugar la estufa, vuelva a conectar el soporte anti-vuelco.
Consulte las instrucciones de instalacion para mas detalles.
No seguir estas instrucciones puede ocasionar la muerte o quemaduras graves en ni_os
y adultos.
Aseg_rese de que el soporte anti-vuelco haya sido instalado:
• Deslice la estufa hacia adelante.
•Verifique que el soporte anti-vuelco est_ bien asegurado al piso.
•Deslice la estufa para colocarla de nuevo en su lugar asegurandose de que la pata trasera
quede debajo del soporte anti-vuelco.
18

INSTRUCCIONES IMPORTANTES DE SEGURIDAD
ADVERTENCIA: Para reducir el riesgo de incendio, • Instalaci6n apropiada - AI instalar la estufa de gas debe
electrocuci6n, lesiones a personas o daSos al usar la estufa
de gas, siga precauciones b&sicas, incluyendo las siguientes:
• ADVERTENClA: PARA REDUCIR EL RIESGO DE
VOLTEO DE LA ESTUFA DE GAS, I_STA DEBE
ASEGURARSE EN EL PISO MEDIANTE LA
INSTALACION DE DISPOSITIVOS DE ANTI-VUELCO.
PARA VERIFICAR SI LOS DISPOSITIVOS ESTAN
INSTALADOS ADECUADAMENTE, DESLICE LA ESTUFA
DE GAS HACIA ADELANTE, CERCIORESE QUE EL
SOPORTE ANTI-VUELCO ESTI_ BIEN FIJO EN EL PISO
Y DESLICE LA ESTUFA DE GAS HACIA ATRAS DE
MANERA QUE LA PATA TRASERA DE LA ESTUFA DE
GAS QUEDE FIJA DEBAJO DEL SOPORTE
ANTI-VUELCO.
•ADVERTENClA: NUNCA use este electrodom_stico
como calefactor de ambientes para calentar o entibiar la
habitaci6n. El hacerlo puede resultar en la intoxicaci6n con
mon6xido de carbono y el sobrecalentamiento del homo.
•ADVERTENClA: NUNCA cubra ranuras, orificios o
pasajes en la parte inferior del homo ni cubra una rejilla
entera con materiales tales como papel de aluminio. El
hacerlo bloquea el flujo de aire en el homo y puede causar
la intoxicaci6n con mon6xido de carbono. Los forros de
papel de aluminio tambi_n pueden atrapar el calory
provocar un riesgo de incendio.
•AVISO: No almacene articulos que interesen a los niSos
en los armarios que est&n encima de una estufa de gas o
en el respaldo de protecci6n de una estufa de gas - al
trepar los niSos encima de la estufa para alcanzar algen
objeto, podrian lastimarse seriamente.
hacer la conexi6n el_ctrica a tierra de acuerdo con las
normas locales o, en ausencia de normas locales, con el
Cddigo Electrico Nacional (National Electrical Code),
ANSI/NFPA 70. Cerci6rese que la instalaci6n y puesta a
tierra de la estufa de gas sean efectuadas adecuadamente
por un t_cnico competente.
• Esta estufa de gas esta equipada con un enchufe de tres
puntas con contacto a tierra para su protecci6n contra
riesgo de electrocuci6n y deberia enchufarse directamente
a un tomacorriente que tiene conexi6n a tierra. No corte ni
quite la punta para conexi6n a tierra de este enchufe.
• Desconecte el suministro de energia antes de dar
mantenimiento.
• El mal uso de las puertas o cajones del aparato
electrodom_stico, tales como pisar, recostarse o sentarse
en las puertas o cajones, puede ocasionar heridas.
• Mantenimiento - Mantenga el &rea de la estufa de gas
despejada y libre de materiales combustibles, gasolina y
otros vapores y liquidos inflamables.
• Almacenaje dentro o encima de la estufa de gas - No se
debe almacenar materiales inflamables en el homo o cerca
de las unidades que est&n en la superficie.
• El tamaSo de la llama del quemador superior debe
ajustarse de manera que no se extienda m&s all& de los
bordes del utensilio de estufa.
Para estufas de gas de limpieza automatica -
• Antes de efectuar la limpieza autom&tica del homo - quite
la charola para asar y otros utensilios. Limpie con un trapo
hemedo todo derrame excesivo antes de iniciar el ciclo de
autolimpieza.
GUARDE ESTAS INSTRUCClONES
19

P
USODELASUPERFICIEDECOCCION
A
MED PUSHIO_URN
B
MED
C
APAGADO 0 0 COMAL
MED PUSHYO TURM
DE F
A. Localizador del quemador de superficie
B. Perilla de control del quemador posterior izquierdo
C. Perilla de control del quemador delantero izquierdo
D. Perilla de control del quemador central
E.Perilla de control del quemador posterior derecho
F Perilla de control del quemador delantero derecho
Peligro de Incendio
No permita que la llama del quemador se extienda m&s
all& que la orilla de la cacerola.
Apague todos los controles cuando no est_ cocinando.
No seguir estas instrucciones puede ocasionar
la muerte o incendio.
Los encendedores electricos encienden automaticamente los
quemadores de superficie al girar las perillas de control hacia
LITE (Encendido).
Antes de fijar una perilla de control, coloque el utensilio de cocina
Ileno en la parrilla. No ponga a funcionar un quemador con un
utensilio de cocina vacio o si la parrilla esta libre.
Para fijar la temperatura del quemador:
1. Oprima y gire la perilla a la izquierda hacia LITE.
Los cuatro quemadores de superficie haran un chasquido
pero solo el quemador cuya perilla de control este en LITE
producirA una llama.
2. Gire la perilla hacia cualquier posicion entre HI (Alto) y LO
(Bajo). El chasquido parara. Use el cuadro siguiente como
guia para fijar los niveles de calor.
AJUSTE USO RECOMENDADO PARA
LITE (Encendido) •
HI (Alto) •
MED (Medio)
Encender el quemador.
Comenzar a cocinar los
alimentos.
•Hacer hervir un liquido.
• Mantener un hervor rapido.
• Dorar rApidamente los alimentos.
• Freir o sofreir los alimentos.
• Preparar sopas y salsas.
• Guisar o cocer al vapor los
alimentos.
LO (Bajo) • Mantener los alimentos calientes.
• Dejar hervir a fuego lento.
Cortes de corriente
En el caso de un corte de corriente prolongado, se pueden
encender los quemadores de superficie manualmente. Sostenga
un cerillo encendido cerca del quemador y gire la perilla a la
izquierda hacia LITE. Despu6s de que el quemador se encienda,
gire la perilla al ajuste deseado.
20