Whirlpool ED27DQ User manual

r
A Note To You 2
Parts And Features 4
Before Using Your
Reftigerator 5
lur
7
If You Need
cir$z:
Wamanty
22
24
1-800-253-1301
Cdl us with questions or comments.
NO-FROST REFRIGERATOR-FREEZERS
MODELS ED27DQ ED25DQ ED22DQ

A Note To You
Thank you for buying a Whirlpool appliance.
You have purchased a quality, war/&c/ass home appliance. Years of engineering experience have gone
into its manufacturing. To ensure that you will enjoy many years of trouble-free operation, we have
developed this Use and Care Guide. lt is full of valuable information on how to operate and maintain
your appliance properly and safely. Please read it carefuliy. Also, please complete and mail the Owner-
ship Registration Card provided with your appliance. This will help us notify you about any new informa-
tion on your appliance.
Your safety is important to us.
This guide contains safety symbols and statements. Please pay special attention to these symbols and
follow any instructions given. Here is a brief explanation of the use of each symbol.
This symbol will help alert you to such dangers as
personal injury, burns, fire and electrical shock. This symbol will help you avoid actions which
could cause product damage (scratches, dents,
etc.) and damage to your personal property.
Our Consumer Assistance Center number, 1-800-253-l 301,
is toll-free, 24 hours a day.
If you ever have a question concerning your appliance’s operation, or if you need service, first see “If
You Need Assistance Or Service” on page 22. If you need further help, feel free to call our Consumer
Assistance Center. When calling, you will need to know your appliance’s complete model number and
serial number. You can find this information on the model and serial number label (see diagram on
page 4). For your convenience, we have included a handy place below for you to record these numbers,
the purchase date from the sales slip and your dealer’s name and telephone number. Keep this book
and the sales slip together in a safe place for future reference.
Model Number
Serial Number
Purchase Date
Dealer Name
Dealer Phone

Important Safety Instructions
To reduce the risk of fire, electrical shock, or injury when using your
refrigerator, follow these basic precautions:
l Read all instructions before using the
refrigerator.
l Child entrapment and suffocation are not
problems of the past. Junked or abandoned
refrigerators are still dangerous ... even if
they will “just sit in the garage a few days.”
lf you are getting rid of your old refrigerator,
do it safely. Please read the enclosed safety
booklet from the Association of Home
Appliance Manufacturers. Help prevent
accidents.
l Never allow children to operate, play with, or
crawl inside the refrigerator.
l Never clean refrigerator parts with flammable
fluids. The fumes can create a fire hazard or
explosion. . FOR YOUR SAFETY.
DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE VAPORS AND LIQUIDS
IN THE VICINITY OF THIS OR ANY OTHER
APPLIANCE. THE FUMES CAN CREATE A
FIRE HAZARD OR EXPLOSION.
- SAVE THESE INSTRUCTIONS -
Help us help you
Please:
l Install and level the refrigerator on a floor that
will hold the weight and in an area suitable for
its size and use.
l Do not install the refrigerator near an oven,
radiator or other heat source.
l Do not use the refrigerator in an area where the
room temperature will fall below 55°F (13°C).
l Keep the refrigerator out of the weather.
l Connect the refrigerator onty to the proper kind
of outlet, with the correct electrical supply and
grounding. (Refer to the Electrical Require-
ments and Grounding Instructions Sheet.)
l Do not load the refrigerator with food before it
has time to get properly cold.
l Use the refrigerator only for the uses described
in this manual.
l Properly maintain the refrigerator.
l Be sure the refrigerator is not used by anyone
unable to operate it properly.
Also, remove tape and any inside labels (except
the model and serial number label) before using
the refrigerator.
To remove any remalnlng glue:
l Rub briskly with thumb to make a ball, then
remove.
OR
l Soak area with liquid hand dishwashing
detergent before removing glue as described
above. Do not use sharp instruments, rubbing
alcohol, flammable fluids or abrasive cleaners.
These can damage the material. See “Impor-
tant Safety Instructions” above.
NOTE: Do not remove any permanent instruction
labels inside your refrigerator. Do not remove the
Tech Sheet fastened under the refrigerator at the
front.

Parts And Features
This section contains captioned illustrations of your appliance. Use them to become familiar with where
all parts and features are located and what they look like.
Liaht -
Conboilpsnei
tight
/ Model and
---I-I -..-L--
maker with
cubed and
crushed ice 1~
II
IIII uLzG+T#
ice bin ~!lII 1 IIp
II
Light
Removable
freezer shaives
(number varies
with model)
Snack bin
Slide-out
freezer baskets IIIII II
(number varise IIIII -!z.JllllJ
with model)
Meat drawer
Utility
-compartment
- Utility bin
-Wine rack
Door bin giidee
(number varies
with modsi)
1 Egg bin
Adjustabie
slide-out
\ spiiiguard
shelves
Mwt dreww II
;gyyb
(on side wail)
Crisper with
vmidity control
Leveling rollers \
(behind base grille) Base grille
Control panel
Model ED27W shown
I
Freezer control
I
Refrigerator control

Before Using Your
Refrigerator
In This Section Pa* Paw
.................................................................5 indali it property ..............................................5
I
Plug it in .........................................~.................... 5 Level it ..............................................................6
It is important to prepare your refrigerator for use. This section will tell you how to clean it, connect it to
a power source, install it and level it.
Clean it
Clean your refrigerator before using it, if neces-
sary. See cleaning instructions on oaae 18.
Plug it in
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only 15 or 20 ampere
fused and properly grounded electrical supply is
required. It is recommended that a separate
circuit serving only this appliance be provided.
Use a receptacle which cannot be turned off with
a switch or pull chain. Do not use an extension
cord.
See Electrical Requirements and Grounding
Instructions Sheet in your Literature Package.
Install it properly
1. Allow 55inch (1.25 cm) space on each side
and at the top of the refrigerator for ease of
installation.
2. If the refrigerator is to be against a wall, you
might want to leave extra space on the hinge
side closest to the wall so the door can be
opened wider.
For ED27W only: A minimum of 1% inch
(2.9 cm) between the refrigerator door and
wall is required, or a minimum of 1% inch
(39 cm) between the freezer door and wall is
required.
3. The refrigerator can be flush against the wall.
4. Make sure ice maker water supply has been
connected. Refer to Installation Instructions.
l-prong grounding
type wail receptacle,
grounding plug

Level it
Your refrigerator has 2 front leveling screws-one
on the right and one on the left. To adjust one or
both of these. follow the directions below.
1. Remove base grille. (See page 16.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclockwise.
4. Check with level.
5. Replace base grille. (See page 16.)
Right to raise;
left to lower
Use a screwdriver

Using Your Refrigerator
In This Section
Paw
Setting the controls ............................................ 7
Changing the contrd settings ........................... 8
Adjusting the refrigerator sheives ................... .6
Adjusting the door bins ..................................... 9
Adjusting the door bin glides ........................... .9
Removing the crisper and crisper cover.. ....... .9
Adjusting the crisper humidity control ......... .I0
Removing the meat draww and cover..
..........10
Adjusting the meat drawer temperature.. ...... .I0
Removing the snack bin .................................. 11
Adjusting the wine rack ................................... 11
Paw
Removing the freezer baskets ...................... 11
Removing the frscwr shelf ...........................11
TRIRSTCRUSHER~ dispensing systsm ..... 12
Using the automattc ice maker .....................13
Removing the ice maker storage bin ...........14
Sotving common Ice maker problems .........15
Removing the door trim (dispsnser area) ... 15
Removing the base grille .............................. 16
Changing the light bulbs ...............................16
Understanding the sounds you may hear ...17
Saving energy ................................................ 17
In order to obtain the best possible results from your refrigerator, it is important that you operate it
properly. This section will tell you how to do just that.
Setting the controls
Controls for the refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
the first time:
1. Set the Refrigerator Control to 3.
Refrigerator Control adjustments range from
1 (warmest) to 5 (coldest).
2. Set the Freezer Control to 8.
Freezer Control adjustments range from
A (warmest) to C (coldest).
3. Give the refrigerator time to cool down com-
pletely before adding food. This may take
several hours.
The settings indicated above should be
correct for normal, household refrigerator
usage. The controls will be set correctly when
milk or juice is as cold as you like and when ice
cream is firm. If you need to adjust these
settings, see ‘Changing the control settings” on
page 3.
NOTE: The Automatic Exterior Moisture control
continuously guards against moisture build-up on
the outside of your refrigerator cabinet. This
control does not have to be set or adjusted.

Changing the control settings
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call our
Consumer Assistance Center number. (See
page 23.)
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments.
l Then adjust the Freezer Control if needed.
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
If Refrigerator
Section is
TOO COLD
REASON:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Controls not set correctly
for your conditions
RECOMMENDED
CONTROL SElTlNGS:
Refrigerator
Freezer ii
Refrigerator
Freezer :
Refrigerator 2
Freezer B
If ICE isn’t
MADE FAST
ENOUGH
If BOTH
SECTIONS
are TOO WARM
Heavy ice usage
Very cold room temperature
(can’t cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator 3
Freezer C
Refrigerator
Freezer i
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy food
items.
To remove glass shelves:
1. Remove items from shelf.
2. Slide shelf out with an even, constant pull.
3. Lift front and slide the rest of the way out.
To move shelf guides to a new position:
1. Lift front of guide. Pull guide forward off rear
support. Repeat for other guide.
2. To replace guide, push guide onto rear
support. Push front of guide down onto
support.
To replace glass shelves:
1. Guide rear of shelf into shelf guide.
2. Slide shelf into place.
Be careful when
handling giaso items.
8

Adjusting the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push bin down until it stops.
,. Support button
Adjusting the door bin glides
-.
The door bin glides can be used to secure odd-
shaped items or to separate other items.
1. Grasp glide.
2. Slide glide along bin.
Removing the crisper and crisper cover
To remove the crisper:
1. Slide the crisper straight out to the stop.
2. Lift the front slightly.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Hold cover firmly with both hands and lift front
of cover off supports.
2. Lift cover out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls
of refrigerator.
2. Lower front into place.
Lift the cover
front, than the
back.
out to the stop,
lift the front
and pull again.

Adjusting the crisper humidity control
You can control the amount of humidity in the
moisture-sealed crisper.
l The control can be adjusted to any setting
between LOW and HIGH.
l LOW (open) lets moist air out of the crisper for
best storage of fruits and vegetables with skins.
l HIGH (closed) keeps moist air in the crisper for
best storage of fresh, leafy vegetables.
Removing the meat drawer and cover
To remove the meat drawer:
1. Slide the meat drawer straight out to the stop.
2. Lift the front slightly.
Pull out to the stop, lift the
front and pull agaln.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove meat drawer and crisper.
2. Lift front of cover off supports.
3. Lift cover out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls
of refrigerator.
2. Lower front into place.
3. Replace meat drawer and crisper.
Adjusting the meat drawer temperature
Cold air flows against the meat drawer through
an opening between the freezer and the refrig-
erator. This helps keep the meat drawer colder
than the rest of the refrigerator for better storage
of meats.
Use control to
adjust meat drswer
temperature.
Slide the control to let more or less cold air
through.
10

Removing the snack bin
To remove the snack bin:
1. Slide snack bin straight out to the stop with an
even, constant motion.
2. Lii the front.
3. Slide bin out the rest of the way.
4. Replace in reverse order.
Pull out to the
Adjusting the wine rack
To remove the wine rack:
1. Lift front of wine rack.
2. Pull rack off rear support.
3. Replace in reverse order.
Removing the freezer baskets
To remove a basket:
1. Slide basket out to the stop.
2. Lift the front to clear the stop.
3. Slide basket out the rest of the way.
Pull out to the stop, lift
the front and pull again.
To replace a basket:
1. Place basket on the slides.
2. Make sure the wire stops clear the front of the
slides.
3. Slide basket in all the way.
Removing the freezer shelf
To remove the shelf:
1. Lift right side of shelf off supports.
2. Slide shelf out of shelf support holes.
3. Replace in reverse order.
11

THIRSTCRUSHERTM dispensing system
Personal Injury Hazard
Tumbling ice and pressure on a fragile
glass can break lt. Do not use a fragile
glass when dispensing ice or water.
Doing so could result in personal injury or
breakage.
The ice dispenser
Ice is dispensed from the ice maker storage bin
in the freezer. When the dispenser bar is
pressed, a trapdoor opens in a chute between
the dispenser and the ice bin. Ice is moved from
the bin and falls through the chute. When the
dispenser bar is released, a buzzing sound may
be heard for a few seconds as the trapdoor
closes. The dispenser system will not operate
when the freezer door is open.
For crushed ice, cubes are crushed before
being dispensed. This may cause a slight delay
when dispensing crushed ice. Noise from the ice
crusher is normal, and pieces of ice may vary in
size.
When changing from CRUSHED to CUBE, a
few ounces of crushed ice will be dispensed
along with the first cubes.
To dispense ice:
1. For cubed ice, move Ice Selector Switch to
CUBE position.
For crushed Ice, move Ice Selector Switch to
CRUSHED position.
2. Press a sturdy glass against the ice dis-
penser bar. Hold glass close to dispenser
opening so ice does not fall outside of glass.
3. Remove the glass to stop dispensing.
NOTE: The first few batches of ice may have an
off-flavor from new plumbing and parts. Throw
the ice away. Also, large amounts of ice should
be taken from the ice bin, not through the
dispenser.
CUBE ICE CRUSHED
12

The water dispenser
Chilled water comes from a tank behind the meat
drawer. It holds approximately 1% quarts (1.5 L).
When the refrigerator is first hooked up, press
the water dispenser bar with a glass or jar until
you have drawn and discarded 2 or 3 quarts (1.9
to 2.8 L). The water you draw and discard will
rinse the tank and pipes.
Allow several hours to chill a new tankful.
NOTE: The small tray beneath the dispenser is
designed to evaporate small spills. There is no
drain in this tray. Do not pour water into it.
To dispense water:
1. Press a sturdy glass against the water
dispenser bar.
2. Remove the glass to stop dispensing.
NOTE: Dispense enough water every week to
maintain a fresh supply.
The dispenser light
WAlEF
To turn on night light, slide dispenser LIGHT
switch to the left. See page 17 for directions for
changing the dispenser light bulb.
Using the automatic ice maker
Here are a few things you will want to know about
your automatic ice maker:
l The ON/OFF lever is a wire signal arm.
Down ... to make ice automatically.
up ... to shut off the ice maker. . . .
NOTE: o&turn on m
connected to the water supplv.ms fpL
Ice maker water sugpiy hook up are attach -
ed to the back of the rwrator cabia
l It is normal for ice crescents to be attached by a
corner. They will break apart easily.
l The ice maker will not operate until the freezer
is cold enough to make ice. This can take
overnight.
l If ice is not being made fast enough and more
ice is needed, turn the Refrigerator Control
toward a higher number. Watt a day and, it
necessary, turn the Freezer Control toward C.
l Good water quality is important for good ice
quality. It is not recommended that the ice
maker be connected to a softened water suppfy.
Water softener chemicals, such as sait from a
maffunctioning softener, can damage the ice
maker mold and lead to poor ice quality. If a
softened water supply cannot be avoided, it is
important that the water softener be well
maintained and operating properly.
Raise
signal
arm to
stop ice
maker.
LOWW
signal
arm to
l tsrt ice4
maksr.
13

Removing the ice maker storage bin
Remove, empty and clean the storage bin if:
l the ice dispenser has not, or will not, be used
for a week or more.
l a power failure causes ice in the bin to melt and
freeze together.
l the ice dispenser is not used regularly.
To remove ice bin:
1. Pull the covering panel out from the bottom
and slide it to the rear.
2. Lift the signal arm so it clicks into the OFF (up)
position. Ice can still be dispensed, but no
more can be made.
3. Lift the front of the storage bin and pull it out.
4. Empty the ice bin. Use hot or warm water to
melt the ice if necessary. Never use anything
sharp to break up ice in the bin. This can
damage the bin and dispenser mechanism.
5. Wash with mild detergent. Rinse well. Do not
use harsh or abrasive cleaners or solvents.
6. When replacing the bin, make sure it is
pushed in all the way. Then push the signal
arm down to the ON position to restart ice
production.
14

Solving common ice maker problems
PROBLEM CAUSE SOLUTIONS
Ice dispenser 9 Freezer door open
l Close the freezer door.
won’t work
l Ice bin not properly installed l Make sure bin is pushed in all the way.
l Wrong ice in bin
l Use only crescents from ice maker. Shake
the bin occasionally to keep cubes separated
and to obtain increased storage capacity.
l Dispenser not used for
l Dump old ice and make a new supply.
extended periods, causing
ice cubes to melt together
Ice dispenser
stop8 worklng
l Ice dispenser bar held in
l Wait about 3 minutes for the dispenser motor
too long to reset.
l Large amounts of ice should be taken from the
bin, not through the dispenser.
Off-taste or
odor in ice
l Ice attracts airborne odors;
l Dump old ice and make a new supply. Store
old ice excess ice in covered container.
l Water quality
l Water containing minerals (such as sulfur) may
require a fitter to remove.
l Foods not properly wrapped
l Wrap properly. See pages 20 and 21.
l Ice bin and freezer may
l Clean freezer and ice bin. See cleaning chart
need cleaning on page 18.
l Plumbing to ice maker
l Follow Installation Instructions for proper ice
maker water supply hook up. (See back of
refrigerator cabinet.)
l New ice maker
l The first few loads of ice from a new ice maker
may have an off-taste. Dump ice and make a
new supply.
Removing the door trim (dispenser area)
(ED27DQ only)
To remove the trim:
1. Remove all items from the shelf.
2. Pull trim piece straight up at each end.
To replace the trim:
1. Locate each end of trim piece above the trim
pocket opening in refrigerator door liner.
2. Push the trim piece straight down until it stops.
3. Replace items on the shelf.
15

Removing the base g ril
To remove the grille:
1. Open both doors.
2. Pull base grille forward to release the support
tabs from the metal clips.
3. Do not remove Tech Sheet fastened behind
the grille.
To replace the grille:
1. Line up grills support tabs with metal clips.
2. Push firmly to snap into place.
3. Close the doors.
See cleaning instructions for defrost pan and
condenser coils on page 19.
Changing the light bulbs
I
Electrical Shock Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electricity
leading to it at the main power supply.
Failure to do so could result in personal
injury.
To change refrigerator light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Console to remove
bulb.
3. Replace bulb with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
To change crisper light:
1. Disconnect refrigerator from power supply.
2. Pull top of light shield forward until it snaps
free.
3. Lower light shield to clear bottom supports.
4. Pull light shield straight out to remove.
5. Replace bulb with a 40-watt appliance bulb.
6. Replace light shield in reverse order.
7. Reconnect refrigerator to power supply.
To change light below ice bin:
1. Disconnect refrigerator from power supply.
2. Push in sides of light shield until it snaps free.
3. Replace bulb with a 40-watt appliance bulb.
4. Replace light shield.
5. Reconnect refrigerator to power supply.
16

To change light behlnd qukk freeze
compartment (ED27W and DE25 W):
1. Disconnect refrigerator from power supply.
2. Lii and secure quick freeze compartment
door.
3. Remove light shield by pulling top forward.
4. Replace bulb with a 40-watt appliance bulb.
5. Replace light shield.
6. Reconnect refrigerator to power supply.
To change dispenser area light:
1. Disconnect refrigerator from power supply.
2. Reach through dispenser area to remove bulb.
3. Replace with a heavy-duty 1 O-watt bulb, which
can be purchased from your Whirlpool dealer.
4. Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs will fit
your refrigerator. Be sure to replace a bulb with
one of the same size and shape.
Understanding the sounds you may hear
Your new refrigerator may make sounds that your
old one didn’t. Because the sounds are new to
you, you might be concerned about them. Don’t
be. Most of the new sounds are normal. Hard
surfaces like the floor, walls and cabinets can
make the sounds seem louder.
The following describes the kinds of sounds
that might be new to you, and what may be
making them.
Slight hum, soft hiss
You may hear the refrigerator’s fan motor and
moving air.
Clicking or snapping sounds
The thermostat makes a definite click when the
refrigerator stops running. lt also makes a sound
when the refrigerator starts. The defrost timer will
click when the defrost cycle starts.
Saving energy
You can help your refrigerator use less electricity.
l Check door gaskets for a tight seal. Level the
cabinet to be sure of a good seal.
l Clean the condenser coils regularly.
l Open the door as few times as possible. Think
about what you need before you open the door.
Get everything out at one time. Keep food
organized so you won’t have to search for what
you want. Close door as soon as food is
removed.
Water sounds
When the refrigerator stops running, you may
hear gurgling in the tubing for a few minutes after
it stops. You may also hear defrost water running
into the defrost water pan.
Ice maker sounds
l trickling water
l thud (clatter of ice)
You may hear buzzing (from the water valve),
trickling water and the clatter of ice dumped into
the bin.
Running sounds
Your refrigerator has a high-efficiency compres-
sor and motor. It will run longer than older
designs. It may even seem to run most of the
time.
l Go ahead and fill up the refrigerator, but don’t
overcrowd it so air movement is blocked.
l It is a waste of electricity to set the refrigerator
and freezer to temperatures colder than they
need to be. If ice cream is firm in the freezer
and drinks are as cold as your family likes
them, that’s cold enough.
l Make sure your refrigerator is not next to a heat
source such as a range, water heater, furnace,
radiator or in direct sunlight.
17

Caring For Your Refrigerator
In This Section Paw WP
Cleaning your rekig8rsbr ...............................
18 Power
interruption8 .......................................20
Vacation and moving care ............................... 19
Your refrigerator is built to give you many years of dependable service. However, there are a few things
you can do to help extend its product life. This section will tell you how to clean your refrigerator and
what to do when going on vacation, moving or during a power outage.
Cleaning your refrigerator
Both the refrigerator and freezer sections defrost
automatically. But both should be cleaned about
once a month to help prevent odors from building
up. Spills should be wiped up right away. Personal Injuty Hazard
To clean your refrigerator, turn the Refrigerator Refrigeration system tubes are located near
Control to OFF, unplug it, take out all removable the defrost pan and can become hot.
parts and clean the refrigerator according to the Remove and install defrost pan carefully.
following directions. Failure to do so could result in personal
injury.
PART WHAT TO USE HOW TO CLEAN
Removable parts Sponge or cloth with mild
l Hand wash, rinse and dry thoroughly.
(shelves, crisper, etc.) detergent and warm water
Outside Sponge, cloth or paper towel
l Wash outside of cabinet. Do not use
with mild detergent, warm abrasive or harsh cleaners.
water and an appliance wax
(or good auto paste wax)
l Rinse and dry thoroughly.
l Wax painted metal surfaces at least
twice a year. Apply wax with a clean,
soft cloth. Waxing painted metal
SUrfaCeS provide8 rUSt prOteCtiOn.
Do not wax plastic parts.
Inside walls Sponge, soft cloth or paper
l Wash with mixture of warm water and
(freezer should be
allowed to warm up towel with baking soda or - mild detergent, or
so cloth won’t stick) mild detergent and warm
water -baking soda (2 tablespoons 126 g]
to 1 quart [.95 L] of water).
l Rinse and dry thoroughly.
Door liners and Sponge, soft cloth or paper
l Wash, rinse and dry thoroughly.
gasket8 towel with mild detergent
and warm water DO NOT USE cleaning waxes,
concentrated detergents, bleaches or
cleaners containing petroleum on
plastic parts.
Plastic parts Soft, clean sponge or soft,
l Wash, rinse and dry thoroughly.
(covers and panels) clean cloth with mild
detergent and warm water DO NOT USE paper towels, window
sprays, scouring cleansers or
flammable flukls. These can scratch
or damage material. See “Important
Safety Instructions” on page 3.
0

PART
Defrost pan
WHAT TO USE
Sponge or cloth with
mild detergent and
warm water
HOW TO CLEAN
l Remove base grille. (See page 16.)
l To remove defrost pan, lift pan over wire brace
(remove tape: if any).
l Wash, rinse and dry thoroughly.
l Replace with notched corner to the rear. Push it in
all the way.
l Make sure defrost pan drain tube is pointing into
pan.
l Replace base grille.
Condenser coils Vacuum cleaner with
extended narrow
attachment
l Remove base grille.
l Vacuum coils when dusty or dirty. Coils may need
to be cleaned as often as every other month.
l Replace base grille.
Floor under
refrigerator Floor cleaners
l Roll refrigerator out only as far as the water supply
line allows.
l Clean floor.
l Roll refrigerator back into place.
l Check to see if the refrigerator is level.
Vacation and moving care
Long vacations
Remove all the food if you are going for a month
or more. Turn off the water supply to the ice
maker at least one day ahead. When the last
load of ice drops, turn off the ice maker. Make
sure all ice crescents are dispensed out of the
mechanism.
Unplug the refrigerator. Clean, rinse it well and
dry. Tape rubber or wood blocks to the tops of
both doors to prop them open far enough for air
to get in. This will keep odor and mold from
building up.
Personal Injury Hazard
Do not allow children to climb on, play near
or climb inside the refrigerator when the
doors are blocked open.
They may become injured or trapped.
To restart refrigerator, see “Using Your Refrigera-
tof on page 7.
Short vacations
No need to shut off the refrigerator if you will be
away for less than four weeks. Use up perish-
ables; freeze other items.
1. Turn off your ice maker by raising signal arm.
2. Shut off the water supply to the ice maker.
3. Empty the ice bin.
Moving
Shut off the ice maker water supply a day ahead
of time. Disconnect the water line. After the last
supply of ice drops, lift the signal arm to turn off
the ice maker.
Remove all food. Pack frozen food in dry ice.
Unplug the refrigerator and clean it thoroughly.
Take out all removable parts. Wrap all parts
well and tape them together so they don’t shift
and rattle. Screw in the leveling legs: tape the
doors shut; and tape the electric cord to the
cabinet.
When you get to your new home, put every-
thing back and refer to page 5. Also, remember
to reconnect the water supply line.
19

Power interruptions
If electricity goes off, call the power company.
Ask how long power will be off.
1. If service is to be interrupted 24 hours or less,
keep both doors closed. This will help foods
stay frozen.
2. If service is to be interrupted longer than
24 hours:
(a) Remove all frozen food and store in a
frozen food locker.
OR
(b) Place 2 Ibs. (0.9 kg) of dry ice in freezer for
every cubic foot of freezer space. This will
keep food frozen for 2 to 4 days. Wear
gloves to protect your hands from dry ice
burns.
OR
3.
(c) ff neither a food locker or dry ice is avail-
able, use or can perishable food at once.
A full freezer will stay cold longer than a partly
filled one. A freezer full of meat will stay cold
longer than a freezer full of baked goods. If
food contains ice crystals, it may be safely
refrozen, although the quality and flavor may
be affected. If the condition of the food is poor
or if you feel it is unsafe, dispose of it.
Questions 7
Call our Consumer Assistance Center telephone
number, 1-600-253-l 301.
Food Storage Guide
~:I..I!YC Storing frozen food Paw 1
........................................21
There is a correct way to package and store refrigerated or frozen food. To keep food fresher, longer,
take the time to study these recommended steps.
Storing fresh food
Food placed inthe refrigerator should be
wrapped or stored in air and moisture proof
material. This prevents food odor and taste
transfer throughout the refrigerator. For dated
products, check code date to ensure freshness.
Leafy vegetables
Remove store wrapping and trim or tear off
bruised and discolored areas. Wash in cold
water and drain. Place in plastic bag or plastic
container and store in crisper.
Vegetables with skins
(carrots, peppers)
Store in crisper, plastic bags or plastic container.
Fruit
Wash, let dry and store in refrigerator in plastic
bags or crisper. Do not wash or hull berries until
they are ready to use. Sort and keep berries in
their store container in a crisper, or store in a
loosely closed paper bag on a refrigerator shelf.
Eggs
Store without washing in the original carton on
interior shelf.
Milk
Wipe milk cartons. For best storage, place milk
on interior shelf.
20