Whirlpool GB2FHDXW - 7-27-09 User instructions

PRODUCT MODEL NUMBER PRODUCT DIMENSIONS
LOCATION REQUIREMENTS
GB9SHDXV
GB2FHDXW
GB9FHDXW
Electrical Requirements: A 115-volt, 60-Hz,
AC-only, 15- or 20-amp fused, grounded electrical
supply is required. It is recommended that a
separate circuit serving only your refrigerator be
provided. Use an outlet that cannot be turned
off by a switch. Do not use an extension cord.
Water Supply Requirements: A cold water supply
with water pressure of between 35 and 120 psi
(241 and 827 kPa) is required to operate the water
dispenser and ice maker. If you have questions
about your water pressure, call a licensed,
qualified plumber.
IMPORTANT: The pressure of the water supply
coming out of a reverse osmosis system going to
the water inlet valve of the refrigerator needs to be
between 35 and 120 psi (241 and 827 kPa).
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs to
be a minimum of 40 to 60 psi (276 to 414 kPa).
Because Whirlpool Corporation policy includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10208431-D-WH
07/27/09
2¹⁄₂" (6.3 cm)
¹⁄₂" (1.25 cm)
To ensure proper ventilation for your refrigerator,
allow for a 1⁄2" (1.25 cm) space at the top and behind
the refrigerator. If your refrigerator has an ice maker,
allow extra space at the back for the water line
connections. When installing your refrigerator next to
a fixed wall, leave 21⁄2" (6.3 cm) minimum on the hinge
side (some models require more) to allow for the door
to swing open.
NOTE: It is recommended that you do not install the
refrigerator near an oven, radiator, or other heat
source. Do not install the refrigerator in a location
where the temperature will fall below 55°F (13°C).
Bottom Mount Refrigerator
Model #
Depth
“A”
Cab. Width
“B”
Cab. Height
“C”
Overall Height
“D”
Depth
“E”
GB9SHDXV
GB9FHDXW
307⁄8"
(78.4 cm)
295⁄8"
(75.2 cm)
651⁄2"
(166.4 cm)
6615⁄16"
(170 cm)
333⁄8"
(84.8 cm)
GB2FHDXW 307⁄8 "
(78.4 cm)
325⁄8"
(82.9 cm)
681⁄2"
(174.0 cm)
6915⁄16"
(177.6 cm)
333⁄8"
(84.8 cm)
4
1
D
overall
C
top of
cabinet
B
not incl.
handle
A
®
incl.
handle
E