Whirlpool THIN TWIN User manual

-
-
-_____
--
_--
~~-
w
YJ ol’
UseAndCare
r
A Note to You
Understanding
Safety
Getting to Know
Your Washer/Dryer
Operating Your
Washer
Operating Your
Dryer
Caring for Your
Washer/Dryer (
Laundry Tips
If You Need
Assistance or
Service
Warranty
I
For U.S.A. on‘Ib
, call the
Conwmw kols nce Center
with que4iollsofcomments.
1-800-253-I 301
LARGE CAPACITY
THIN TWIN” AUTOMATIC WASHER/DRYER
2
3
6
7
12
16
20
33
36
PART NO. 3401088

-
A Note to You
Thank you for buying a Whirlpool@ appliance.
You have purchased a quality, worMclass home appliance. Years of engineering experience
have gone into its manufacturing. To ensure many years of trouble-free operation, we have
developed this Use and Care Guide. It is full of valuable information on how to operate and
maintain your appliance properly and safely. Please read it carefully. Also, please complete
and mail the Ownership Registration Card provided with your appliance. This will help us
notify you about any new information on your appliance.
Your safety is important to us.
This guide contains safety statements under warning symbols. Please pay special attention to
these symbols and follow any instructions given. Here is a brief explanation of the use of the
symbol.
I
This symbol will help alert you to such
dangers as personal injury, burns, fire,
and electrical shock. I
Our Consumer Assistance Center number in the U.S.A.,
l-800-253-1301, is toll-free 24 hours a day.
If you have a question concerning your appliance’s operation, or if you need service, first see
“If You Need Assistance or Service” on page 33. If you need further help, call us. When
calling, you will need to know your appliance’s complete model number and serial number.
You can find this information on the model and serial number label (see diagram on page 6).
For your convenience, we have included a handy place below for you to record these num-
bers, the purchase date from the sales slip, and your dealer’s name and telephone number.
Keep this book and the sales slip together in a safe place for future reference.
Model Number
Serial Number
Purchase Date
Dealer Name
Dealer Phone
2

.____-- -- ~~~ 1- - ---__-
Understanding Safety
For your safety, the information in this manual
must be followed to minimize the risk of fire or
explosion or to prevent property damage, personal
injury, or loss of life.
-Do not store or use gasoline or other flammable vapors and liquids
in the vicinity of this or any other appliance.
-WHAT TO DO IF YOU SMELL GAS:
l Do not try to light any appliance.
l Do not touch any electrical switch; do not use any phone in your
building.
l Clear the room, building, or area of all occupants.
l Immediately call your gas supplier from a neighbor’s phone.
Follow the gas supplier’s instructions.
l If you cannot reach your gas supplier, call the fire department.
I
Installation and service must be performed by a qualified installer,
service agency, or the gas supplier.
3

---
_-
IMPORTANT SAFEl-Y INSTRUCTIONS
To reduce the risk of fire, electrical shock, or injury to
persons when uslng your washer/dryer, follow basic precau-
tions, including the following:
l Read all instructions before using your
l If your hot water has not been used
THIN TWIN@ washer/dryer. recentfy (usually 2 weeks or longer),
. Do not machine wash or machine dry hydrogen gases may build up in your
items cleaned, washed, soaked in, or water heater and your hot water pipes.
spotted with wax, paint, gasoline, oil, dry HYDROGEN GAS IS EXPLOSIVE. To
cleaning solvents, or other flammable prevent injury or damage, before using
fluids. The fumes can create a fire your washer/dryer, turn on all hot water
hazard or explosion. Always hand wash faucets and allow water to run for several
and line dry items containing these minutes. This will allow gases to escape.
materials. Do not smoke or use any open flame
l Flammable fluids (dry-cleaning solvents, near your faucet while it is open.
kerosene, gasoline, etc.) should not be Please ...
used or stored in or near your washer/
l Install and level washer/dryer in a well-
dryer. Do not add flammable fluids to ventilated room and on a floor that can
your wash water. These substances support the weight.*
give off vapors that can create a fire . Connect washer/dryer to the correct
hazard or explosion. 3-prong outlet, electrical supply, water
l Do not allow children to operate, play supply, and drain.’
with, or crawl on or inside your washer/ @Ground washer/dryer properly.*
dryer. Supervise children closely when
your washer/dryer is used near them.
l Have only a qualified person install,
repair, or replace parts on washer/dryer.
l Before your washer/dryer is removed
from service or discarded, remove the
l Protect washer/dryer from the weather
and keep it where the temperature is
lid and door to prevent accidental above 45°F (7°C).
entrapment.
l Maintain washer/dryer properly.
l After starting a cycle, do not reach into
the basket unless the washer Cycle
l Use only fabric softeners specifiilly
Control Knob is pushed in and all motion labeled as not being harmful to the dryer.
stops.
l Do not allow lint to build up inside the
l Do not reach into your dryer if the drum dryer or exhaust system. Cleaning should
is moving. be done periodically by a qualified
person.
l Do not dry rubber, rubber-like, or heat-
sensitive materials with heat. McLean lint screen before or after each
bad.
l Do not tamper with the controls.
l Do not let dust, lint, paper, rags, chemi-
cals, etc. pile up around or under your
washer/dryer.
‘See the Installation Instructions.
- SAVE THESE INSTRUCTIONS -
4

Understanding your responsibilities
l Unplug the power supply cord or turn off
l Never operate your washer/dryer if:
electrical power before attempting to
service your washer/dryer. Shut off gas -it is not working right (i.e. noisy, too hot).
valve if you have a gas washer/dryer. -it is damaged.
l Do not wash or dry items that are soiled -parts are missing.
with vegetable or cooking oil. These -all panels are not in place.
items may contain some oil after -the lint screen is loose, damaged, or
laundering. Due to the remaining oil, the missing.
fabric may smoke or catch fire by itself.
l Be sure that your washer/dryer:
l Store flammable solvents or fluids away
from your washer/dryer. is properly connected to fuel and
exhaust systems (gas dryers must be
l Dry cleaning solvents or fluids should vented outdoors).*
never be put directly into your washer/
dryer. -is not installed against draperies or
curtains, or on carpet.’
*Store detergent, laundry aids, and other
materials in a cool, dry place where
children cannot reach them (in a locked
cabinet if possible).
l Read and follow instructions on pack-
ages of detergent and laundry aids,
especially warnings and precautions.
l Do not use chlorine bleach and ammo-
nia or acids (such as vinegar or rust
remover) in the same wash. Hazardous
fumes can form.
-is used only for jobs normally expected
of a home washer/dryer.
is not used by anyone unable to operate
it properly.
*See the Installation Instructions.
*Unplug power supply cord before
attempting to service your washer/dryer.
l Do not machine wash or dry fiberglass
materials. Small particles can stick to
the fabrics in following loads and cause
skin irritation.
- SAVE THESE INSTRUCTIONS -
5

Getting to Know Your
Washer/Dryer
The parts and features of your THIN TWIN@ washer/dryer are illustrated in this section.
Become familiar with all parts and features before using your washer/dryer.
Model and ser
Optional
exhaust
Dryer controls
- Dryer drum
-Lint screen
Tub
Basket
Other features not shown:
Automatic dryness control
MAGIC CLEAN. lint filter
Ordering a fabric softener
dispenser
A fabric softener dispenser is available for
your washer. Order Fabric Softener
Dispenser, Part No. 3350834.
To order, write to:
Whirlpool Corporation
Attention: Customer Service Department
1900 Whirlpool Drive
LaPorte, Indiana, U.S.A. 46350
6

-
-
~~ 1
Operating Your Washer
In This Section
Page Page
Before starting your washer.. .............7 Uslng rinse and spin ......................... 10
Starting or stopplng your washer.. ...
.7 Using drab and
spln
............... _“.. .... 10
Selecting a load size ........................... 7 What happens In each cycle.. ........... 11
Selecting wash-rinse temperatures ..
.8 MAGIC CLEAN l lint filter.. ................. 11
Selecting a cycle and time .................. 8
Operating your washer properly ensures maximum washing efficiency. This section gives you
important information to help you to select a cycle, time, and temperature for your wash load.
Before starting your washer
Add measured detergent. Then place a
sorted load in the washer before starting.
See page 20 for additional “Before you wash
or dr)r information.
NOTE: lf your washer/dryer has a Con-
sumer Features Guide, remove it and place
it in your Use and Care Guide.
Starting or stopping your washer
Starting your washer:
1. Select load size and water temperatures.
2. Push in the Cycle Control Knob and turn it
clockwise. Stop when the indicator on the
knob’s outer ring points to the number in
the wash cycle you want. The numbers
are minutes of wash time.
3. Pull out the Cycle Control Knob.
Refer to page 10 for additional informa-
tion to help you make selections.
Stopping and restarting your washer:
l To stop the washer at any time, push in the
Cycle Control Knob.
l To restart the washer, close the lid (if neces-
sary) and pull out the Cycle Control Knob.
Selecting a load size
Position the Load Size Selector at the setting
that corresponds to the size load you want to
wash. Select a load size based upon the size
of the load and the fabric you are washing.
See page 20 for additional loading information.
To change the load size setting after the
washer has started to fill, move the Selector
to the desired new setting.

Load size tips
l Items should move freely in the washer. Do
not overload the machine or select a load
size that is too small for the wash load.
l Use a large load size setting for best results
with permanent press clothes.
l Reduce wash time when using a small load
size setting. Loads with only a few small
items need less wash time.
Selecting wash-rinse temperatures
Match the water temperature to the type of
fabric and soils being washed. The top
temperature is the wash water and the bottom
temperature is the rinse water.
Water temperature tips
l Use warm wash water with the Permanent
Press and Delicate cycles.
l Always use cold rinse water for permanent
press fabrics.
l For heavily soiled permanent press or knit
clothes, prewash or presoak before washing
in warm water.
See the “Water usage guide” on page 25 for
more information.
Selecting a cycle and time
You will find information you need to help
you make correct cycle selections in this
section.
l Pages 9-10: Use the information on these
pages to guide you when selecting a wash
cycle and time.
l Page 11: Use this page to help you under-
stand what happens during a wash cycle.
8

Regular cycle
The Regular cycle features the Gentle Wash
system and high spin speeds to shorten
drying time.
l Use 14 minutes of wash time to clean
sturdily-constructed cotton and linen
fabrics that are heavily soiled loads.
l Use 10 minutes of wash time to clean
cotton and linen fabrics that are lightly to
moderately soiled.
Permanent Press cycle
The Permanent Press cycle features the
Gentle Wash system, a cool-down rinse,
and low spin speeds to reduce wrinkling.
l Use 10 minutes of wash time to clean
permanent press and some synthetic
fabrics that are moderately soiled.
l Use 6 minutes of wash time to clean
permanent press and some synthetics that
are lightly soiled.
NOTE: The washer pauses briefly during the
wash cycle. This is normal for washer
operation.
Delicate cycle
The Delicate cycle features a reduced
agitation speed for gentle soil removal. Low
spin speeds reduce wrinkling.
l Use 8 minutes of wash time to clean
delicate items and washable knits that are
lightly to moderately soiled.
Soak cycle
The Soak cycle features brief periods of
agitation and soak time to help remove
heavy soils and stains that need pretreat-
ment.
l Use warm water when soaking laundry.
(Hot water can set stains.) See pages 22-
24 for stain removal information.
l Use the amount of detergent or presoak
additive recommended by manufacturer.
l After the Soak cycle ends, add detergent
and set a new wash cycle.
Permanent Press cycle
Soak cycle
9

Pre-Wash cycle
The Pre-Wash cycle features a brief period of
high speed agitation to help remove.heavy
soils and stains that need pretreatment.
l Use warm water for prewashing stained
laundry. (Hot water can set stains.) See
pages 22-24 for stain removal information.
. After the Pm-Wash cycle ends, add
detergent and set a new wash cycle.
Super Wash cycle
Super Wash automatically prewashes the
laundry and advances into the Regular wash
cycle. (The washer does not need to be
reset after the Super Wash cycle.) Use this
cycle when washing heavily soiled loads that
need maximum soil removal.
l For proper cleaning, use double the
amount of detergent recommended for a
wash cycle.
NOTE: The machine pauses during Super
Wash. This is normal for washer operation.
Prewash cycle
Super Wash cycle
Using rinse and spin
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may want an extra rinse and spin.
1. Push Cycle Control Knob in and turn
clockwise to RINSE, as illustrated.
2. Pull Cycle Control Knob out. The washer
fills to selected load size, agitates, drains,
and spins.
Using drain and spin
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Push Cycle Control Knob in and turn
clockwise to SPIN, as illustrated.
2. Pull Cycle Control Knob out. The washer
drains, and then spins.
10

What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to
the selected load size) before agitation and
timing start. The washer will begin agitating
immediately after filling; agitation can occur
with the washer lid up or down. After agita-
tion starts, the Cycle Control Knob turns
clockwise until it points to OFF and the cycle
ends.
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
NOTE: A Gentle Wash system helps protect
your fabrics by reducing wash agitation
speed during the last few minutes of wash
agitation in the Regular and Permanent
Press cycles.
WASH RINSE
Wash’
*Agitation speed is reduced in the last
few minutes of most cycles. This provides
better fabric care.
Drain (or partial drain*)
No agitation
‘The Permanent Press cyde partially
drains, fills, agitates briefly, and drains.
Soin
E
w Rinse
u
-+- Drain-No agitation
w Spin-S*y rinse
Ia
Spin
Inl off
MAGIC CLEAN lint filter
The lint filter at the bottom of the washer
basket cleans itself. During agitation, wash
and rinse water pass over the filter, separat-
ing the lint from the water. The lint is then
spun away from the filter and out of the
system during the spin part of the cycle.
If your washer drains into a tub, remove
any lint collected in the tub or strainer.
MA& CLEAN Bidet
lint fitter
interior
11

Operating Your Dryer
In This Section
Page Page
Before starting your dryer ................ 12 Restarting your dryer ....................... 12
Starting your dryer ............................ 12 Understanding your cycles .............. 13
Stopping your dryer .......................... 12 Selecting the right cycle
and setting ......................................... 15
The information in this section helps you learn to use your dryer effiiently and safely. Refer
to “Laundry Tips” on page 20 for additional control setting, sorting, and loading information.
Before starting your dryer
Wipe the dryer drum with a damp cloth
before using to remove dust from storing
and shipping.
Stopping your dryer
You can stop your dryer any time during a
cycle. Open the dryer door or turn the Cycle
Control Knob to OFF.
NOTE: The Cycle Control Knob should point
to an OFF area when the dryer is not in use. If
you want to stop the dryer before the cycle is
finished, turn the Cycle Control Knob to an
OFF area.
Restarting your dryer
1. Close the door.
2. Select a new cycle and temperature (if
necessary).
3. Push the Start Button.
12

-
-.-
Understanding your cycles
See the chart below for descriptions of the cycles that are on your dryer. See page 15 for help
in selecting the right cycle.
NOTES:
l Use the Energy Preferred Automatic
Setting (+) to dry most loads.
l Shaded areas in the illustrations show
cycle locations.
l The last few minutes of all cycles are without
heat to make the load easier to handle.
Automatic cycle
Use an automatic cycle to dry most
loads.
l The automatic cycle shuts off when your
load reaches the selected dryness.
l The Cycle Control Knob will not move
until the load is almost dry. After the cool-
down, the Cycle Control Knob autornati-
tally moves to an OFF area and tumbling
stops.
Dry most loads using the Energy
Preferred Automatic Setting b) .
l If the load is drier than you like, select a
setting closer to LESS DRY the next time
you dry a similar load.
l If the load is not as dry as you like,
complete drying using a Timed cycle.
Select a setting closer to VERY DRY the
next time you dry a similar load.
NOTE: Your dryer has high heat and low
heat automatic cycles. Select the cycle to
match your load.
Timed cycle(s)
Use your Timed cycle to complete drying if
some items are damp after automatic
drying. This cycle is also useful for small
loads or large bulky items.
l For a damp dry, turn the Cycle Control
Knob to 30 minutes or less.
l To help reduce wrinkling, remove the load
from the dryer as soon as tumbling stops.
This is especially important for permanent
press, knits, and synthetic fabrics.
Ene& preferred automatic setting
continued on next page
13

Fluff Air cycle (no heat)
The Air cycle is unheated. Use this cycle to
fluff or air dry bedding, plastic tablecloths,
foam pillows, sneakers, etc. See Warning
on page 15.
Using the Damp Dry cycle
Use this cycle to dry items to damp level or
to dry damp items that do not require an
entire drying cycle. Two examples are
heavy cottons, such as jeans, which you
do not want to become stiff, or cotton
clothes which are easier to press when
damp.
Using the TUMBLE PRESS@
cycle
The TUMBLE PRESS cycle removes
wrinkles from clothes that have been
packed in a suitcase, or from items not
removed from the dryer at the end of a
cycle. Put only a few items in your dryer for
best results when using this cycle. As soon
as the dryer stops, fold or put the items on
hangers.
14

--.
Selecting the right cycle and setting
Use the chart below to guide you when
making drying selections.
l Use a Timed cycle to complete drying if
some items are damp after automatic
drying.
l Do not overdry. Over-drying can cause
shrinkage, static cling, and damage to
some fabrics.
Fire Hazard
Do not dry heat-sensitive fabrics, plastic,
rubber, or some stuffed items with heat.
Use the Fluff Air cycle, or line dry.
Failure to do so could result in fire or
damaged items.
TYPE OF LOAD
CO-I-I-ONS AND LINENS
Extra Heavy - Bedspreads, mattress pads, quilts
Heavyweight - Towels, jeans, corduroys, work clothes
Mediumweight - Sheets, cotton underwear, diapers
Lightweight - Batistes, organdies, lingerie
PERMANENT PRESS, SYNTHETICS AND BLENDS
Heavyweight - Work clothes, jackets, raincoats
Mediumweight - Shirts, play clothes, sheets, slacks
Lightweight - Lingerie, blouses, dresses
KNRS
Heavyweight - Cottons, rayons, blends, T-shirts,
slacks, shirts
Mediumweight - Synthetics (polyester, acrylic, etc.),
dress slacks, skirts, sweaters
Lightweight - Synthetics (polyester, acrylic, etc.) and
blends, lingerie, blouses, dresses
J
J
J
J
J
J
20
20
DELICATE FABRICS
Sheer curtains (2 or 3 panels), gauze, lace, etc. 20-30
RUBBER, PLASTIC, HEAT-SENStTIVE
FABRICS
Foam Rubber - Pillows, bras, stuffed toys 20-30
Plastic - Shower curtains, tablecloths 20-30
Rubber-backed rugs 40-50
Olefin, Polypropylene, Sheer nylon 1O-20
AUTOMATIC
Hlgh
/
J
J
Low
J
TIMED
Hlgh
(minutes)
20
AIR
minutes:
15

------ -
-
Caring for Your Washer/
Dryer
In This Section
Page Page
Maintenance-every load .................... 16 Tips for caring for your
Maintenance-as needed .................... 16 washer’dqer ...................................... 19
Care during periods of non-use ....... 19
Dryers require regular maintenance. Follow the suggestions below to maintain your dryer
PropeW
Maintenance-every load
Cleaning the lint screen
The lint screen is located at the front of the
dryer door opening. Clean it before each
load. A screen blocked by lint can increase
drying time.
1. Open the door and pull the lint screen
straight up.
2. Roll lint off the screen with your fingers.
Do not rinse or wash the screen to
remove lint. Wet lint is hard to remove.
3. Push the screen firmly back into place
and close the door.
IMPORTANT:
l Do not run the dryer with the lint screen
loose, damaged, blocked, or missing.
Doing so can cause overheating and
damage to both the dryer and fabrics.
Maintenance-as needed
Use the following suggestions about clean-
ing and lint removal to maintain your
washer/dryer and keep it operating effi-
ciently.
Cleaning the lint screen area
Periodically remove the dryer lint screen and
vacuum the opening. Use the long, thin
attachment (crevice tool) on your vacuum
cleaner.
16

Cleaning a clogged lint screen
Laundry detergents and fabric softeners can
cause a residue buikfup on the lint screen. A
clogged lint screen can extend drying times.
Clean the lint screen every six months, or
more frequently, if it becomes clogged due
to a residue buildup. Use the following
method:
1. Wet both sides of lint screen with hot water.
2. Wet a nylon brush with hot water and
liquid detergent.
3. Scrub lint screen with the brush until all
residue buildup is removed.
4. Rinse with hot water.
5. Thoroughly dry lint screen with a clean
towel and replace in dryer.
Cleaning the washer/dryer
interior
Washer:
l If the washer interior needs cleaning, put
1 cup (250 mL) of chlorine bleach and
2’cups (500 mL) of detergent in the
washer. Run through a complete cycle
using hot water.
Dryer:
Electrical Shock,
Personal Injury, and Fire and
Exploslon Hazard
l Turn off the electrical power before
cleaning the interior.
l Make sure the dryer is cool.
l Use nonflammable cleaner.
Failure to do so could result in electrical
shock or injury, fire, or explosion.
Garments which contain unstable dyes,
such as denim blue jeans or brightly colored
cotton items, may discolor the dryer interior.
To remove stains from the dryer drum:
1. Make a paste with laundry detergent and
very warm water.
2. Apply paste to a soft cloth and scrub area
until all excess dye is removed.
3. Wipe thoroughly with a damp cloth.
4. Tumble a load of rags to dry. 17

r
Removing accumulated lint
from the dryer
Lint can gather inside the dryer and be fuel
for a fire. it is recommended that lint be
removed every 2 to 3 years, or more often,
depending on dryer usage. Cleaning should
be done by a qualified person. lf you have
any questions, please call our Consumer
Assistance Center at 1-800-253-l 301.
Electrical Shock, Personal injury,
and Product Damage Hazard
l Unplug the Rower supply cord or turn
off the electrical power before
removing dryer panels.
l Make sure the dryer is cool.
l Dryer parts can have sharp edges.
Use care when handling.
l More than one person is required to
lift, tilt, or move machine because of
its weight and size.
aTruck only from rear.
Failure to follow the above instructions
could result in electrical shock, per-
sonal injury, or product damage.
1. Unplug the power supply cord or turn off
the electrical power.
2. Remove back panel. See Installation
Instructions.
3. Remove lint from shaded area in illustra-
tion with a soft brush or vacuum cleaner.
Avoid damaging wires, thermostats,
funnel (gas), or ignitor (gas).
4. Replace panel; reconnect and level dryer
again, if necessary.
Heat inlet Thermostats Motor
Electric dryer with back panel removed
18

-
-
-
---
Tips for caring for your washer/dryer
l Wipe up detergent, bleach, and other spills
with a soft, damp cloth or sponge as they
occur.
l Remove hard water deposits using only
cleaners labeled as washer safe.
l After tinting or dyeing, put chlorine bleach
and detergent in the washer. Run through
a complete cycle using hot water to
remove excess dye or tint. If staining
occurs on following loads, repeat the
process.
l Sharp or metal objects can damage your
washer/dryer. Check pockets for pins,
clips, money, bolts, nuts, etc. Do not lay
these objects on your washer after empty-
ing pockets.
NOTE: Operate your washer/dryer only when you are at home.
Care during periods of non-use
Winter storage or moving care
Install and store your washer/dryer where it
will not freeze. Because some water stays in
the washer, freezing can damage it. If your
washer/dryer is stored or moved during
freezing weather, winterize it.
1. Shut off both water faucets. Disconnect
the drain water inlet hoses.
2. Put 1 quart (1 L) of R.V.-type antifreeze in
the washer basket.
3. Run washer on a drain and spin setting
for about 30 seconds (see page 10) to
mix antifreeze and water.
4. Unplug power supply cord.
To use the washer again:
1. Flush water pipes and hoses.
2. Reconnect water inlet hoses.
3. Turn on both water faucets.
4. Reconnect power supply cord.
5. Run the washer through a complete cycle
with l/z cup (125 mL) of detergent to clean
out antifreeze.
Non-use/vacatiqn care
1. Unplug power supply cord or turn off
electrical power.
2. Clean lint screen and lint filter.
3. Turn off water supply leading to your
washer/dryer. This will help avoid acci-
dental flooding while you are away (for
example, due to a water pressure surge).
19

Laundry Tips
In This Section
Page Page
Before you wash or dry ..................... 20 Saving energy ..................................... 28
Removing stains ................................ 22 Drying special-care items ..................29
Water usage guide ............................. 25 Solving laundering problems ............ 32
Washing special-care items ............. 26 Using laundry aids ............................. 34
This section reviews proper laundering techniques, gives you additional laundering informa-
tion, and discusses causes or solutions to common laundering problems.
Before you wash or dry
Before using your washer/dryer, see pages
3-5 for Important Safety Information.
Sorting
l Close zippers, snaps, and hooks to avoid l Items property sorted for washing are
usually properly sorted for
q
snagging other items. Remove r.F
pins, buckles, and other hard drying. Separate heavily soiled
items from lightly soiled ones
0
objects to avoid scratching the IzYl even if they would normally be
washer interior or the dryer drum.
Remove unwashable trim and washed together. Separate lint
ornaments or heat-sensitive trim that can be givers (towels, chenille) from lint takers
damaged by drying. (corduroy, synthetics, permanent press).
When possible, turn lint takers inside out.
l Stained or wet garments should be
washed promptly for best results. l Separate heavy fabrics (denim, towels)
from light fabriis (synthetics, permanent
l Check garments to make sure all spots and press).
stains were removed during the wash. See
pages 22-24 for pretreatment and stain l Separate dark from light colors; colorfast
from noncolorfast.
removal information. If stains were not
removed, do not tumble dry. Heat may
Load sizes
permanently set stain. Soiled items can also l Drop items into washer loosely. Fill to the
leave stains on the dryer drum. These stains top of the basket. Do not pack
can be picked up by other items in the load. or wrap items around agitator.
l Turn down cuffs and brush away lint and dirt. Items should move easily
l Turn synthetics inside out to avoid pilling.
q
through wash water for best
l Mend tears, loose hems, and seams. cleaning and wrinkle-free
results. Watch for rollover. Items should
l Sharp or metal objects can damage your
washer. Check pockets for pins, sink
and reappear later.
clips, money, bolts, nuts, etc. l To reduce wrinkting, permanent press and
and turn pockets inside out. Do synthetic knits should have more room to
not lay these objects on your move in the water than heavy items
washer after emptying pockets. (towels, jeans).
l Turn lint takers and dark items inside out to l Do not overload the washer/dryer. Cver-
help prevent lint pickup. crowding causes poor cleaning, uneven
l Tie strings and sashes so they will not tangle. drying and wrinkling, and can cause items
to wear out faster (because of pilling).
l Place small items such as baby socks or
hankies in a mesh bag for easier removal.
l Articles to be ironed should be removed from
the dryer while still damp.
20