OPERATIONS
9
Power Button
Press and hold to turn camera ON. Screen comes
on when the camera is started.
Press and hold to turn camera OFF. Screen shows
rush image and then goes off when camera is turned off.
NOTE:
1. Pressing and holding the power button when
recording video may cause the video being
recorded to be lost. Press record button to stop
recording before powering camera off.
2. The power button is active in Car DVR Mode, while
the other buttons become LOCK buttons in DVR
mode to protect video from being overwritten in
loop mode.
White Light Button
Press to turn the white light ON/OFF when camera
is powered ON.
NOTE: The button is active in Car DVR Mode and it
also becomes a LOCK button in DVR mode to protect
video from being overwritten in loop mode.
Menu Button
• Long press to turn Menu Mode ON/OFF
• Short press to toggle between Image, Video, and
System settings.
• Short press to go back one level in Menu and
Replay mode.
M